Tien lenεργασίες

...() // We know what format the data in the memory region has, since we requested // it by setting the fakesink's caps. So what we do here is interpret the // memory region we mapped as an array of signed 16 bit integers. samples := () if len(samples) == 0 { return } // For each buffer (= chunk of samples) calculate the root mean square. var square float64 for _, i := range samples { square += float64(i * i) } rms := (square / float64(len(samples))) ("rms:", rms) return }) // Start the pipeline () // Block on messages coming in from the bus instead of using the main loop for { msg := ().TimedPop()

...username='admin', password='password', realm_name="master") print("current realm",admin.get_current_realm()) users = admin.get_users({}) if len(users) > 0: print("-------------------------------------") for user in users: for key, values in (): print(f"{key}: {values}") if key == 'id': print(admin.get_credentials(user_id=values)) print("-------------------------------------") else: print("No user(s) found") #print(admin.get_realm_roles({})) admin.change_current_realm("Team2Realm") users = admin.get_users({}) print("current realm",admin.get_current_realm()) if len(users) > 0: pr...

...username='admin', password='password', realm_name="master") print("current realm",admin.get_current_realm()) users = admin.get_users({}) if len(users) > 0: print("-------------------------------------") for user in users: for key, values in (): print(f"{key}: {values}") if key == 'id': print(admin.get_credentials(user_id=values)) print("-------------------------------------") else: print("No user(s) found") #print(admin.get_realm_roles({})) admin.change_current_realm("Team2Realm") users = admin.get_users({}) print("current realm",admin.get_current_realm()) if len(users) > 0: pr...

Παρακαλούμε Κάνε Εγγραφή ή Κάνε Είσοδο για να δεις λεπτομέρειες.

Παρακαλούμε Κάνε Εγγραφή ή Κάνε Είσοδο για να δεις λεπτομέρειες.

...Fortran doesn't have built-in AM/PM formatting, so we'll need to manually convert from 24-hour to 12-hour format and decide whether it's AM or PM. Here's an example program that demonstrates how to write log entries to a file with the specified date and time format: ```fortran program logging_example implicit none character(len=8) :: date character(len=10) :: time integer :: hours, minutes, seconds, values(8) character(len=2) :: am_pm character(len=20) :: formatted_datetime ! Open the log file open(unit=10, file='', status='unknown', action='write') ! Get the current date and time call date_and_time(date, time, values) read(time(1:2), *) hours read(time(3:4),...

Môžem vytvoriť koláž a rôzne videa z fotiek ktore mi pošlete. Car driving len teoriu. Ovladam ako tak viem zahrať na ? ? a organ

...compute_value records._compute_field_value(self) File "/opt/odoo16/odoo/odoo/", line 4193, in _compute_field_value (, self) File "/opt/odoo16/odoo/odoo/", line 97, in determine return needle(*args) File "/opt/odoo16/odoo-custom-addons/odoov16/product_brand_inventory/models/", line 42, in get_count_products self.product_count = len(self.member_ids) File "/opt/odoo16/odoo/odoo/", line 4313, in __get__ return super().__get__(records, owner) File "/opt/odoo16/odoo/odoo/", line 2772, in __get__ return super().__get__(records, owner) File "/opt/odoo16/odoo/odoo/", line 1253, in __get__ return self.convert_to_record(value, record) File "/opt/odoo16/odoo/odoo/", line 4127, in

...requirements. First, we will need a function that will take 3 inputs: defined_score as a decimal and 2 strings as input and compare them. The purpose is to find the characters that are not in each string. You miht try converting the column using set(). Just an idea. The output of this function will be based on this equation: (1/3 * ("unique characters of string1" / LEN(string1)) +("unique characters of string2 / LEN(string2)) + 1) . The result of this equation we will call the comparison_score. It should be a decimal. Speed is of the upmost importance only second to accuracy. I recommend/need the function to by multiprocessing as well as using bitwise calculation. The target speed is to process a column of 1,000,000 strings with an average of ...

...spreadsheet for me. My necessity involves handling both text and date/time data. The optimal organization for this data on the sheet would be a mixture of columns and rows. Hence, understanding the context and logic in data placement is key. Additionally, the project would extensively require text and string operations. Ideal candidates should be familiar with various string-related functions such as LEN, RIGHT, LEFT, MID, SUBSTITUTE, and REPT, among others. Your proposal should clearly mention previous similar projects you've undertaken. An understanding of VBA to create customized functions would be a bonus, but is not a compulsory requirement. Parametres Each entry has 2 lessons that must be one hour apart (ie 9am and 11am OR 10am and 12pm) Each entry has 3 lessons cho...

I'm seeking an expert in firewall management to len an authoritative touch to my medium-sized business. The core tasks include: - Establish and configure a tunnel between fortinet firewall and Sonic Firewall with success connection between both sides for send and receive . - Working knowledge of Fortinet FortiGate and Sonic Firewall: The candidate must have prior experience and deep understanding of both platforms to provide a robust and secure solution. The ideal candidate should have demonstrable expertise with firewalls, specifically Fortinet FortiGate and Sonic Firewall. A thorough understanding of network dynamics in a medium-scale business environment would be preferable.

"""458. Nedávno sa môj počítač začal úplne rozpadať. Cievky bzučia, všetko hučí, dokonca aj tie najjednoduchšie hry neťahá. Začal ma to už naozaj štvať. A ja som predsa hr...Nedávno sa môj počítač začal úplne rozpadať. Cievky bzučia, všetko hučí, dokonca aj tie najjednoduchšie hry neťahá. Začal ma to už naozaj štvať. A ja som predsa hráč - milujem hrať nové hry! Musel som chodiť do počítačového klubu, aby som si splnil svoje túžby. Ale to predsa nie je ono, však? (ukázať herný PC) Rozhodol som sa spraviť mini počítačový klub u seba doma! (stlačiť tlačidlo zapnutia) Len sa po...

...get_running_loop().run_in_executor(executor, _scrape_article, link, lang) for link in links] results = await (*tasks) for result in results: if result: (result) (result['keywords']) topKeywords = _getTopKeywords(allKeywords) averageWords = sum([content['totalWords'] for content in contentInfo]) / len(contentInfo) links_scrape_result = { "contentInfo": contentInfo, "topKeywords": topKeywords, "averageWords": averageWords } update_post(post_id, { "links_scrape_result": links_scrape_result }) return { "status": "success", "data": links_scrape_result } # Currently la...

1.) Please debug the attached code. The current error is as follows: ZeroDivisionError: division by zero Traceback: File "C:UsersCOMDAppDataRoamingPythonPython311site-packagesstreamlitruntimescriptrunner", line 534, in _run_script exec(code, module.__dict__) File "C:UsersCOMDDownloads", line 167, in <module> probs_over_1 = ((over_1_goal / len(head_to_head['TotalGoals'])) * 100) 2.) Based on 1 above, modify the code to analyse a bigger data (attached) Timeline: 2hrs Budget: 20$

I am looking for someone with professional C# programming expertise, capable of developing a small application that runs on the Windows operating system (Windows XP / 7 and later). Your job would be to implement a system that reads plain text serial commands from COM4. Some more info: This is a sample string which was captured from the serial data coming on COM4: ST[0]="1 A BMAR " [len=17] I need the app to print the "1 A BMAR" text without the quotes in this case, when the string ST[0]= is detected in the serial port. I can attach to the project a sample log file, captured from the serial port where you can see when the ST[0] string appears. It will be printed on a thermal printer, Elgin L42 PRO, connected via USB. It is compatible with ZPL/EPL/PPLA/PPLB l...

Hi Tien Tien H., I noticed your profile and would like to offer you my project. We can discuss any details over chat.

I wanted to fix this error, "Error occurred when executing SeargeSDXLPromptEncoder: 'g' File "C:UserspdayapinokioapiComfyUI", line 153, in recursive_execute output_data, output_ui = get_output_data(obj, input_data_all) File "C:UserspdayapinokioapiComfyUI", line 83, in get_output_data ...return_values = map_node_over_list(obj, input_data_all, , allow_interrupt=True) File "C:UserspdayapinokioapiComfyUI", line 76, in map_node_over_list (getattr(obj, func)(**slice_dict(input_data_all, i))) File "C:UserspdayapinokioapiComfyUIcustom_nodesSeargeSDXLmodules", line 1296, in encode if len(tokens1["l"]) != len(tokens1["g"]):|

- I need to be able to perform an OpenProcess to 64bit and 32bit processes to read the memory with this code BOOLEAN __2___1__s( HANDLE ProcessHandle, BYTE Data[][200], INT DataSize, INT LEN[] ) { if ((0 == ProcessHandle) || (0 == Data) || (0 == DataSize)) { return 0; } DWORD dwReadableMask = (PAGE_READONLY | PAGE_READWRITE | PAGE_WRITECOPY | PAGE_EXECUTE_READ | PAGE_EXECUTE_READWRITE | PAGE_EXECUTE_WRITECOPY); DWORD dwProtectedMask = (PAGE_GUARD | PAGE_NOACCESS); UINT_PTR ulCurrAddr = 0; BYTE* lpBuff = 0; SIZE_T ulBytesRead = 0; SYSTEM_INFO SysInfo; MEMORY_BASIC_INFORMATION Mbi; ZeroMemory(&SysInfo, sizeof(SysInf...

...myString As String = keysN(0) Dim lastCharacter As String = ( - 1, 1) If lastCharacter <> "/" Then keysN(0) = LCase(keysN(0)) + "/" End If keysN(0) = Replace(keysN(0), "/v2", "/v3") keysN(0) = Replace(keysN(0), "/wc/v3", "/wp/v2/media") Dim BaseUrl1 As String = keysN(0) BaseUrl1 = Mid(BaseUrl1, 1, Len(BaseUrl1) - 1) ' Authorization keys Dim AuthKeys As String = keysN(1) & ":" & keysN(2) = New ("Basic", ((AuthKeys))) Dim imageBytes As Byte() = (imagePath) Dim base64Image As String = Convert

...results from OddsPortal’s darts page (). The program works fine, except that it only ever identifies a maximum of twenty matches, even if there are more matches in the event (all of which are displayed on the same page, incidentally). Here is the actual line causing the problem : rowList = driver.find_elements(By.CLASS_NAME,'eventRow') rowTotal = len(rowList) If I print rowTotal if there are more than 20 items, it still says ‘20’. If I do an inspect I can see clearly that there are more ‘eventRow’s there, and the HTML doesn’t seem to do anything odd after the twentieth occurrence. Hence I’m mystified. I’m not sure if it might be caused by some popup that I’m unaware of, but I’m stuck. I thought o...

I am looking for a freelancer who is advanced in Excel functions, specifically VLOOKUP, HLOOKUP, INDEX, and MATCH. Tasks and Responsibilities: - Assist with applying these functions to a specific project or task (to be determined) - Provide general assistance and guidance with these functions Skills and Experience: - Advanced level of familiarity with Excel functions - Strong understanding of VLOOKUP, HLOOKUP, INDEX, and MATCH functions - Ability to provide clear explanations and guidance on how to use these functions effectively If you have experience with these functions and are confident in your ability to assist, please submit your proposal. Thank you.

Hi Len R., I noticed your profile and would like to offer you my project. We can discuss any details over chat.

Hi Len R., I noticed your profile and would like to offer you my project. We can discuss any details over chat.

Hi Tien Khoi Nguyen L., I noticed your profile and would like to offer you my project. We can discuss any details over chat.

Necesito un logo para una compañía de GPG para vehiculos y quiero como color primario azul marino

...train a CIFAR-100 classifier, reporting both the training and testing accuracy as in the above starter code. However, your model must have fewer than 100,000 (one hundred thousand) parameters (this is a low number of parameters for such a task). To display the total number of parameters for a deep neural network N, you can use something similar to the following code: print(f'> Number of parameters {len( to vector(()))}') Furthermore, you may not train the neural network for more than 10,000 (ten thousand) optimisation steps. You must clearly state the total number of parameters and optimisation steps in both the code and report. Exceeding either of these constraints will result in a 5 mark penalty for every 10% exceeded. For example, a model of 110,000 parameters

I have two modules (old and new). OLD one (engine ECU) send specyfic canbus data, but NEW one module (das...any platform or hex). I have all nececery data explanation for each ID, and message sample. EXAMPLE FRAME MS_312h (0x00000312) Sample data: 08 1F 08 1E 0A 90 08 20 SIGNAL M_STA, OFFSET: 3, LEN: 13, DESC: Motor torque static, DATA TYPE NUMBER(_MULTIPLIER_: 1.0, _OFFSET_: 0.0) SIGNAL M_MAX_ATL, OFFSET: 19, LEN: 13, DESC: Motor Torque Maximum incl. , DATA TYPE NUMBER(_MULTIPLIER_: 1.0, _OFFSET_: 0.0) SIGNAL M_MAX, OFFSET: 35, LEN: 13, DESC: Motor torque maximum, DATA TYPE NUMBER(_MULTIPLIER_: 1.0, _OFFSET_: 0.0) SIGNAL M_MIN, OFFSET: 51, LEN: 13, DESC: Motor torque minimal, DATA TYPE NUMBER(_MULTIPLIER_: 1.0, _OFFSET_: ...

I am looking for a freelancer with experience in working with ESP32 boards to help me resolve a Bluetooth characteristic setValue error...0x4200de61:0x3fced2f0 0x4200d3ea:0x3fced310 0x4200b809:0x3fced370 0x42023536:0x3fced390 0x420240a9:0x3fced3b0 0x42045fd5:0x3fced400 0x42047fa3:0x3fced420 ELF file SHA256: 0000000000000000 Rebooting... ⸮ESP-ROM:esp32s3-20210327 Build:Mar 27 2021 rst:0xc (RTC_SW_CPU_RST),boot:0x8 (SPI_FAST_FLASH_BOOT) Saved PC:0x40377400 SPIWP:0xee mode:DIO, clock div:1 load:0x3fce3808,len:0x43c load:0x403c9700,len:0xbec load:0x403cc700,len:0x2a3c SHA-256 comparison failed: Calculated: 74cb8a0835ff948a23b1fa30f5641bd3d3fc50d3e848150763aab2d791fb9d34 Expected: ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff Attempting to boot anyway...

...from_wav(file_path) (state=) def play_sound(self): if : self.play_button_pressed = True self.duplicate_and_play() self.play_button_pressed = False # reset flag after sound finishes playing def duplicate_and_play(self): sound = noise = WhiteNoise().to_audio_segment(duration=len(sound)) mixed_sound = None try: duplicates_remaining = 2 # Number of desired duplicates while duplicates_remaining > 0: mixed_sound = sound for _ in range(int(1e10000)): mixed_sound = (noise - self.volume_reduction) ("", format="wav") # Export

We need a VA, skill with Photoshop and experienced in handling Airbnb & host platform. We will frequently have photograph taken of new apartment Process: we will upload to One Drive Setup an ASANA task with link to drive, communicate there. VA, need to touch up the photos, including but not limited to len correction, brighten, explosure, alignment/crop，export file size to fit OTA requirement! VA, need to upload and organise back to One Drive folder VA, need to upload to our OTA platform (usually airbnb & ) We will check and correction, within 2 times correction, complete & issue service charge. if you have relative experience, please message me. Thanks

Design a logo for a conference in Mexico City, MX. The conference theme is CONNECT and the organization is called LEN. The organization is the Latino Employee Network (LEN) for a railroad. In the logo for the conference, the word "CONNECT" should be prominent in the middle, and contain the text, LEN Conference 2023. Also try to incorporate elements of the Mexico City Skyline, train tracks, and the primary color should be orange. I really like the branding from the Rocky Railroad VBS, so maybe something similar to such would be good! theme:

I know that you talked with Len for a project and i need to have an interview with you, please let me when we can talk(Removed by Freelancer.com admin)

..._wwan.c: In function ‘qmimux_start_xmit’: /home/user/Downloads/em9191/usb/qmi_wwan.c:134:36: error: wrong type argument to increment 134 | stats64->tx_packets++; | ^~ /home/user/Downloads/em9191/usb/qmi_wwan.c:135:35: error: invalid operands to binary + (have ‘u64_stats_t’ and ‘unsigned int’) 135 | stats64->tx_bytes += len; | ~~~~~~~~~~~~~~~~~ ^~ | | | u64_stats_t /home/user/Downloads/em9191/usb/qmi_wwan.c: In function ‘qmimux_get_stats64’: /home/user/Downloads/em9191/usb/qmi_wwan.c:167:38: error: incompatible types when assigning to type ‘u64’ {aka ‘long...

Das Projektgebiet liegt an der Rinaustrasse im nordöstlichen Industriegebiet von Kaiseraugst. Der Bau mit den Abmessungen von 18 x 61 m soll vollständig in der ca. 20 m hohen und ca. 32 ° stei- len Böschung zwischen der Rinaustrasse (Böschungsfuss) und Kantonsstrasse (Böschungsoberkante) erstellt werden. Für den Neubau entstehen Hanganschnitte von ca. 18 m im westlichen Abschnitt und ca. 15.5 m Höhe im östlichen Abschnitt des Neubaus. Das fertige Gebäude soll lediglich bis auf eine Höhe von ca. 6.5 m über das Niveau Erdgeschoss hinterfüllt werden. Es ist somit eine permanente Baugrubensicherung für den oberen Bereich zu planen. Es sollen verschiedene Varianten für die temporäre und permanente Sicherun...

I need a comic style illustration, think "rubber hose" style The illustration should be simple like the examples The character must be a devil doing the snatch exercise (see example) I'm not looking for the devil to be muscular but rather for him to look like that specific comic style and for example to have his tongue sticking out or something like that The design must be with only two colors, black and red, or only red, it must not have letters, only the illustration. -Final files VECTOR IN ILLUSTRATOR See the examples, thank you

...range(len(runners)): # print("Runner Name: " + str(runners[i].text)) runners[i].click() (10) race_no = driver.find_element_by_class_name("race-number").text location = driver.find_element_by_class_name("meeting-info-description").text distance = driver.find_element_by_xpath("//li[@ng-if='']").text ages = [] wins_arr = [] places_arr = [] places = driver.find_elements_by_xpath("//*[@current-value='']") wins = driver.find_elements_by_xpath("//*[@current-value='(runner)']") arr_temp = [] for idx_age in range(len(places)): try: values = driver.find_elements_by_class_name("form-details-list")[idx_age] key_vals = values.find_elements_by_tag_name(&quo...

Hi Pham Tien M., I noticed your profile and would like to offer you my project. We can discuss any details over chat.

I need the text on the hat (GREM •LEN) separated by itself in a vertical line going down. Need the letters to in a PNG file, 300 dpi.

The current code executes booth loops and compares the newly sorted arrays indefinite amount of time. I need help to modify the code in a such a way that executes the second loop " for j in range(len(Er)): " only once, while the first loop " for i in range(len(Eo)): " and the compassion line are run indefinably. The motivation behind this change is that my Er array will be constant and will never change, so once sorted it way stay constant, while the Eo array will be changing all the time and will require continuous sorting. The idea is to reduce the computational time by eliminating unnecessary sorting of Er

Hello I'm Tien, I will try to complete your project well Thank you so much!

help me fix this error below when pinging 1.1.1.1 via default gateway set via layer 3 routing via sg300 switch, this does not happen under Windows 2022 server or Windows operatin...via sg300 switch, this does not happen under Windows 2022 server or Windows operating systems, just Macbook Montery and Catalina but not BigSur MacOS 64 bytes from 1.1.1.1: icmp_seq=26 ttl=58 time=13.747 ms 36 bytes from : Redirect Network(New addr: ) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 cad8 0 0000 40 01 eb76 1.1.1.1 64 bytes from 1.1.1.1: icmp_seq=27 ttl=58 time=14.329 ms 36 bytes from : Redirect Network(New addr: ) Vr HL TOS Len ID Flg off TTL Pro cks Src Dst 4 5 00 0054 678b 0 0000 40 01 4ec4 1.1.1.1

...print(result) That’s it. The goal is that when you run the code I gave you it should be slower # Old Code def get_basement_presence(tablename): t0 = () (columns={'x': 'x0', 'y': 'y0', 'h': 'height', 'w': 'width'}, inplace=True) tablename['x1'] = tablename['x0'] + tablename['width'] tablename['y1'] = tablename['y0'] + tablename['height'] tablename['ID'] = range(1, len(tablename) + 1) t1 = () diff = t1 - t0 print("rename t:" + str(diff)) tbl = () # tbl = ('class_name=='window' or class_name=='base level'') t2 = () diff = t2 - t1 print("filter t:" + str(diff)) # tbl...

Hi, Here is Tien Thinh Phat Import Export Company Ltd from Vietnam (), an agricultural products exporter from Vietnam. We produce high quality of dried black fungus (Botanical name: Auricularia polytricha) and dried shitake mushroom (Lentinula edodes). Currently we are on demand to export to South Korea and Japan market, that's we are looking for long term collaborators/freelancers to help us search on Japan/South Korea importers as well as distributing our products to Japan/South Korea market. If you want to be a part of our project, pls don't hesitate to get connected to me by today and offer me your expected wage. Thanks and hope to have chance to co-operate with you. P/S: I attach the pictures of fungus and mushroom inside, pls check for reference

Hi Pham Tien M., I noticed your profile and would like to offer you my project. We can discuss any details over chat.

Hi Len R., I noticed your profile and would like to offer you my project. We can discuss any details over chat.

Hi Mahesh B., we are working an excellent new product line that i'd like to discuss with you to see if you would be interested and able to work with us. May we discuss? Thx Len

Hi Tien N., I noticed your profile and would like to offer you my project. We can discuss any details over chat.

Hi Tien N., I noticed your profile and would like to offer you my project. We can discuss any details over chat.

Hello Tien - I have a small 3D project for a food brand that I need help with - do you have time to help with this? thanks

I need help getting my development environment working with Tensorflow, Cuda, cudNN and visual studio to be able to use available nvidia gpu's for processing. This is what i’ve got so far, i just can’t figure out what i’m doing wrong… Windows 10 pro fresh install Visual studio 2019 and 2022 community edition Cuda 11.8 cudnnn 8.6.0.163 ...what i’m doing wrong… Windows 10 pro fresh install Visual studio 2019 and 2022 community edition Cuda 11.8 cudnnn 8.6.0.163 copy dll’s and alos create directory for the cudnn made environment system variables anaconda 3.9.12 What else could i be missing? I run this in anaconda but still get False for available GPU’s when i have 2 rtx 3060ti’s isntalled. python import tensorflow as tf le...