CAD/CAM Jobs

I’m changing the drawings of my house and the builder provided me with the CAD drawings. I need to extend the bathroom an extra 1 meter. I have the original house plans plus a set of updated sketches that show new walls, appliance positions, and cabinet runs. What I need now is a clean, well-layered AutoCAD file that reflects these changes so the contractor and the building department can work from one accurate source. Here’s how I picture the collaboration: • I’ll send you the existing plans in PDF and DWG along with my marked-up kitchen layout. • You translate everything into a single, tidy .dwg that includes revised floor plan, labeled dimensions, key elevations, and any notes required for permit review. • All line weights, layers, and text styl...

I need a complete piping layout designed and drafted for a new chemical-processing unit we’re adding to our plant. The scope is limited to the piping system—no equipment sizing or process optimisation—just a clean, code-compliant layout that integrates with the existing process equipment and utilities. You’ll start from my PFD, equipment list, and preliminary tie-in points. Using your preferred CAD platform (AutoCAD Plant 3D, SmartPlant, or similar), generate: • General arrangement drawings showing routing, elevations, and spacing • Isometrics with bill of materials and weld counts • Updated line list reflecting any new specs or revisions All drawings must meet standard chemical-industry practices (ANSI/ASME B31.3) and fit within the space co...

I need an experienced draftsman to create detailed electrical drawings for a commercial building project using AutoCAD. The scope includes: - Power distribution plans - Network cabling layouts - CCTV system designs Ideal skills and experience: - Proficiency in AutoCAD - Expertise in electrical drafting for commercial buildings - Knowledge of power distribution, network cabling, and CCTV systems - Attention to detail and accuracy Please provide samples of previous work and a timeline for completion.

I'm seeking a professional for stormwater management design and planning. Key Requirements: - Design and plan efficient stormwater management systems. - Collaborate on project specifications and requirements. - Provide detailed design drawings and documents. Ideal Skills: - Expertise in civil or environmental engineering. - Experience in stormwater management systems. - Proficiency in design software (AutoCAD, etc.). - Strong communication skills for collaboration.

I need complete plumbing shop drawings for a single-COMMON toilet room so I can forward them for permitting and contractor coordination. The package must contain a fully dimensioned floor plan, at least one longitudinal and one transverse section, plus interior elevations that clearly locate every pipe, vent, and fixture. On the floor plan, show: • Pipe locations with line sizes and slope arrows ALONG WITH ELEVATIONS • Exact fixture placements referenced to finished walls • All vent routes, including risers through the roof • Clear, readable measurements from center-lines and faces of walls In the sections and elevations, indicate pipe inverts, vertical offsets, clean-outs, and any required drops so the installer can build straight from the sheets. Labels, legen...

I’m ready to turn a concept for a medical-grade product into a fully realized prototype, complete with a functional interior and a refined exterior. The goal is to arrive at a working physical model that meets clinical safety standards and shows investors exactly how the device will look, feel, and perform. Here’s what I already have: the concept sketches, core requirements, and preliminary dimensions. What I need from you is end-to-end support—material selection, 3-D CAD refinement, tolerance analysis, and fabrication of both the outer shell and the internal mechanism. Because the device will ultimately be used in a healthcare setting, every choice must align with FDA-acceptable, biocompatible materials and clean-room manufacturing practices. Deliverables: 1. Updated C...

I am moving ahead with the construction of a modern three-unit triplex and need a professional who can take the project from concept to build-ready documentation. Each unit should feel spacious through an open floor plan and incorporate smart-home technology while still meeting solid energy-efficiency targets. I prefer the clean, contemporary lines of modern architecture but want to keep the construction itself on a realistic footing by specifying standard, readily available materials. Style is important, yet durability, code compliance, and straightforward sourcing are equally critical so the project stays on schedule and within a sensible cost range. Key objectives • Develop architectural and structural drawings that translate the modern aesthetic into a practical build. &...

I already have a top-view sketch of a new goat-farming facility and now need a complete elevation package drawn up in a modern style. Using the sketch as your base layer, please create front, side and sectional elevations that also weave in every service run the farm will rely on. Key requirements • Elevations: All faces, scaled, showing roof pitch, cladding, ventilation gaps and foundation lines. • Utilities: – Electrical: a full-specification wiring plan with breaker sizing, conduit routes, switchboard position and fixture schedule. – Water: supply lines, drinker placement, valve locations and pipe diameters. – Waste: separate piping layout for the compost pit and urine collection tank, including fall gradients. • Bill of Materials: one ...

I have a set of hand-drawn architectural sketches that now need to live inside FreeCAD. The goal is to translate every line and dimension into a clean, editable FreeCAD (FCStd) file that I can continue refining later. Because I already work in FreeCAD for smaller parts of the project, the entire workflow and final files must remain natively in that environment—no exports from other CAD systems, please. At this stage the core task is creating the base model from my sketches; once that is rock-solid I may extend the brief to detail work such as room layouts, sections, or façade studies, so keeping the model organised with clearly named bodies and groups is essential. Deliverables • Native FreeCAD (.FCStd) file reflecting my supplied sketches with all walls, openings, and ...

I need a complete structural and layout package for a ground-mounted solar power plant. My goal is to walk away with construction-ready 2D drawings as well as an accurate 3D model that I can share with installers, investors, and permitting authorities. Scope • 2D Drawings: Please provide site layout, structural framing, foundation details, cable routing, and any additional views required for on-site construction approval. The set should be fully dimensioned, labeled, and formatted for plotting. • 3D Model: The model must show solar panels, mounting structures, inverters, and the overall array layout so clashes and clearances are obvious at a glance. Native files plus exports (DWG, STEP or IFC) are preferred so I can review them in AutoCAD, Revit, or SketchUp. • Consis...

I have a rectangular plot that measures 55 ft east-to-west by 45 ft south-to-north, with the main entrance on the north side. I need a clear, construction-ready 2D layout drawn strictly according to Vastu principles; any deviation from Vastu will be rejected outright. The brief is straightforward: • Total built-up area must fall between 1,300 sq ft and 1,500 sq ft. • The house is for two brothers—each requires a self-contained 1 BHK suite. • Both suites will share one common living room only. That living room must meet a specific size that comfortably serves both families and must sit exactly where Vastu recommends; please indicate the final dimensions on the drawing. Need AutoCAD Files. All bedrooms, kitchen, toilets, staircase positioning, and service spaces sho...

I have a 3d file of a adapter for a respirator, i need the adapter made into a 90 degree angled adapter - It has to be relatively low profile to fit under a welding mask - The STL labeled 3M-Male-40Male is the adapter i need customized. - The STL labeled 3m_face_mask_to_3m_hose_adapter_stl is and example of what i need the final product to look like

I have a set of hand-drawn architectural sketches that now need to live inside FreeCAD. The goal is to translate every line and dimension into a clean, editable FreeCAD (FCStd) file that I can continue refining later. Because I already work in FreeCAD for smaller parts of the project, the entire workflow and final files must remain natively in that environment—no exports from other CAD systems, please. At this stage the core task is creating the base model from my sketches; once that is rock-solid I may extend the brief to detail work such as room layouts, sections, or façade studies, so keeping the model organised with clearly named bodies and groups is essential. Deliverables • Native FreeCAD (.FCStd) file reflecting my supplied sketches with all walls, openings, and ...

I’m getting ready to owner-build an industrial-look home in Perth, Western Australia and need a complete steel-frame package designed around these key specs: • Structure: 75 mm × 75 mm × 2 mm galvanised SHS throughout • Cladding: corrugated iron, exposed where possible to keep the raw industrial feel • Slab: on-ground, spray-foam insulated beneath and at edge • Layout: at least five rooms (family-sized—think four bedrooms and a study or similar) plus open living areas • Openings: high-performance, energy-efficient windows sized for WA sun paths and ventilation • Codes: must meet the NCC/BCA and local Perth council requirements, including wind region compliance Deliverables I’m after 1. Certified structural calculat...

I already have a base DWG file—now I need it fully populated with the information shown in my reference sheets. I will share those PDFs as soon as we start so you can match line weights, layer naming, and general presentation style exactly. The job is straightforward: • Open the existing DWG. • Insert all missing notes, call-outs, and dimensions where indicated. • Make sure the title block is complete and consistent across all layouts. • Keep the file well-organized: clean layers, no stray objects, and proper scaling throughout. Please return the updated DWG along with a plotted PDF set for quick review. Accuracy to the references I provide is the key acceptance criterion; if everything aligns visually and numerically, we are done.

I need detailed mechanical drawings for assembly of industrial machinery, specifically for a vibratingproduct. The drawings should focus on mechanical moving parts that are responsible for conveying materials. Ideal skills and experience: - Proficiency in creating mechanical assembly drawings - Experience with industrial machinery, especially related to conveying materials - Strong understanding of mechanical moving parts and their integration - Ability to provide clear, precise, and comprehensive drawings Freelancers should have a background in mechanical engineering or a related field and should be able to work within the specified budget.

We're turning a library of engineered shade and tensile structures into an online, parametric configurator and need a technically minded partner who can bridge structural engineering logic with clean, modern code. What you will actually do • Map the existing engineering rules, sizing tables and load cases into algorithms that drive real-time geometry and BOM output. • Build—or work alongside me to build—the web experience where a user selects a base model, adjusts spans, heights and fabric options, and instantly sees only configurations that remain within the predefined structural limits. • Keep the architecture scalable so new modules, fabrics or connection types drop in without rewrites. We’ll supply the product drawings, design tables and th...

I need a retaining wall designed to support clay earth. The wall will be 3 meters high and constructed using block and geogrid materials. It's essential that the designer has Professional Indemnity (PI) insurance. Key requirements: - Design must accommodate clay soil - Use of block and geogrid materials - 3-meter height - PI indemnity is a must Ideal skills and experience: - Civil or structural engineering background - Experience with retaining wall design and geogrid applications - Knowledge of clay soil behavior and engineering solutions - Valid PI insurance Please provide relevant credentials and past project examples.

I need an experienced pattern maker to turn my garment sketches into production-ready sewing patterns. The job is focused on wearable pieces—specifically dresses, tops and pants—so knowledge of garment construction, grading and fit is essential. Please work from the measurements and style notes I’ll supply, then deliver clean, clearly marked patterns that a sample room can follow without extra clarification. Digital files (PDF or compatible CAD) are preferred so I can share them with my manufacturer, but I’m open to suggestions if another format will ensure accuracy. Deliverables: • Full-scale sewing patterns for:   – Dresses   – Tops   – Pants • Seam allowances, grainlines, notches and labeling in...

I need a licensed PE engineer to review and stamp our mechanical designs for manufacturing equipment. The designs are related to machine components to be certified under OSHA and State Laws For Lifting Devices. Ideal Skills and Experience: - Licensed Professional Engineer (PE) with verifiable license. - Expertise in mechanical engineering, specifically with machine components - Experience with manufacturing equipment design - Attention to detail and thoroughness in review

I need a clean, printable 3-D CAD model of a small product prototype. My sketches outline the overall shape and key dimensions, but they are still rough; I’m relying on you to refine those ideas into a production-ready design and supply the final file in STEP format so I can move straight to machining or additive manufacturing. We will start with a brief call or chat where I share the sketches, intended materials, and critical tolerances. From there, I’d like you to: • translate my drawings into accurate, watertight geometry • resolve any draft angles, fillets, or internal supports needed for printing • return a single STEP file that opens flawlessly in SolidWorks and Fusion 360 Optional: if you can also export an STL for a quick slicer check, even better,...

I’m looking for a patient trainer with experience using Clay AI to walk me—an absolute beginner—through Clay AI in one or two concise, screen-shared sessions. The goal is to leave those calls confident enough to: • Build practical Clay AI workflows from scratch • Set up or tweak simple custom AI models for my own use Please propose the format you think works best (Skype, Zoom, or any screen-share tool is fine) and outline what you would cover in roughly 60–90 minutes per session. A brief takeaway guide or recording link afterward would be a huge plus. If this sounds like something you can deliver, let me know your approach, the prep material you’ll need from me, and how soon we can get started.

Overview I need a professional, high-end logo for TurfEstimator, a SaaS platform built for artificial turf companies to pre-qualify leads using online measuring and CAD-style estimation tools. The "Anti-Garden" Rule (CRITICAL) Do NOT use literal blades of grass, lawnmowers, leaves, suns, or "organic" shapes. This is a technical construction tool for contractors, not a residential gardening service or fertilizer brand. I will immediately reject any "nature" or "eco-friendly" looking entries. Visual Direction - The Vibe: Sleek, Modern, Precision Engineering. Think "Construction-Tech" or "CAD Software" (like AutoCAD, Procore, or Bluebeam). - The Concept: Avoid literal grids or complex blueprints. Focus on "Dynamic Geometry&qu...

I’m ready to move from ideas to build-ready plans for a single-level, modern residence of roughly 1,500 – 2,500 sq ft. The goal is a contemporary aesthetic with clean lines, abundant natural light, and an efficient open layout that makes smart use of every square foot. What I need from you: conceptual sketches through to fully detailed architectural drawings that a local engineer and builder can follow without hesitation. Along the way, I’d like to review a 3D model so we can fine-tune flow, window placement, and exterior materials before locking in the final set. Key requirements • One floor only – no basements or additional stories. • Modern styling inside and out. • Floor area must stay within the stated range once walls are counted. &b...

I'm seeking a local 3D printer to create large art sculptures (over 12 inches) from resin. Key Requirements: - High-detail printing of large sculptures - Use of resin material Ideal Skills and Experience: - Expertise in high-detail 3D printing - Proficiency with resin printers - Experience with art sculptures Please provide examples of previous work and ensure local availability for pickup.

I need the attached meter-layout sketch converted into a clean, professional one-line diagram showing the runs from the utility transformer to the meter pan. Label and conductor size must match the attached layout. Should include title block and sheet Deliverables: • PDF suitable for submission I’ll review the PDF against the template to make sure it's as requested; once it matches both, the project is complete.

I have a full drawing set for an upcoming building project and I need a clear, engineer-certified calculation of how much concrete the job will actually require. The scope is limited to material quantity estimates only; I’m not looking for structural load or foundation design work right now, just an accurate concrete take-off so I can finalise procurement. You’ll work from the PDFs/DWG files I’ll share (AutoCAD 2023 format). Feel free to pull the model into Revit, Civil 3D, or your preferred estimation software, but the final numbers must be traceable back to the drawing references. Please include: • A calculation sheet (Excel or equivalent) showing all volume breakdowns by element—slabs, beams, columns, footings, etc. • A one-page summary table with t...

My current residential floor plan is outdated and no longer makes the best use of space. I need a fresh layout that re-works the living areas, bedrooms, kitchen and bathrooms while also integrating a few additional rooms. The goal is to keep circulation smooth, respect structural constraints, and maximise natural light. You’ll be starting from my existing drawings (PDF and basic DWG files) and delivering a fully revised plan that can move straight into permitting. A modern drafting toolset such as AutoCAD, Revit or SketchUp is preferred so I can easily share the files with my contractor later. Please include: • Updated 2D floor plan with clear dimensions and annotations • Placement of the new rooms, showing logical flow with the rest of the house • A quick 3D ma...

I need a design and engineering plan for a storage facility addition to a light industrial building. The storage facility will be used primarily for storing tools and smaller machinery. Key requirements: - Secure and efficient layout for tool and machinery storage - Durable construction to withstand industrial use - Compliance with local building codes and regulations Ideal skills and experience: - Experience in designing industrial storage solutions - Familiarity with construction engineering - Knowledge of local building regulations

I am a Senior Automotive Plastic Product & Mold Design Engineer with over 11 years of industry experience in injection-molded plastic part development for automotive applications. I specialize in interior trim components, fascia parts, instrument panel components, and OEM-compliant product design. My core expertise includes plastic part design, B-surface and C-surface modeling, master section development, wall thickness optimization, rib/boss/snap-fit design, draft analysis, GD&T, and tolerance stack-up analysis. I have strong knowledge of Design for Manufacturability (DFM), tooling feasibility, injection molding processes (hot runner, cooling, gating systems), and mold flow analysis interpretation. I have hands-on experience supporting full product development cycles — from ...

I need a complete, print-ready STL package that covers the whole perimeter of my car—front, sides, and rear. The kit must include: • Front lip • Fender flares (all four arches) • Side skirts I’ll share high-resolution scans and key dimensions of the vehicle once we start, along with photos that show the styling direction. Your job is to translate those references into watertight, properly-scaled STL files that drop straight into a slicer with no repairs needed. Key points to keep in mind: • Parts should be split logically so they fit a 300 mm print bed, with hidden alignment tabs or bolt flanges for easy assembly. • Wall thickness should average 3–4 mm unless a structural rib is required. • Surfaces must be smooth enough to...

This is all one big complex Called Tech South Industrial complex located at 727 E Jenkins in Columbus Ohio 43207, the property already has a decent exterior but we are looking for a nice upgrade with 767 E Jenkins where the v arches are to be the front sign and inviting place. I’m giving the exterior of my industrial property a fresh, modern-and-sleek facelift, with the clear goal of boosting its aesthetic appeal. The project center's on two visible touchpoints: a re-imagined façade and complementary signage that work together to convey a clean, contemporary identity. Here’s what I need: • Concept stage – mood boards and two or three façade options that explore materials, colors, lighting accents and how new signage integrates. • Design de...

I need a detailed framing design for a single-family residential building using wood. Requirements: - Design must be structurally sound and comply with local building codes. - Use of sustainable and high-quality materials. - Include detailed drawings and specifications. Ideal Skills & Experience: - Expertise in wood framing design for residential buildings. - Strong understanding of building codes and structural integrity. - Proficient in CAD software for creating detailed design drawings. Please provide samples of previous work and a timeline for project completion.

I need precise AutoCAD shop drawings for an aluminium curtain wall system. The package must go beyond a simple layout—I am looking for fully-scaled drawings that include detailed section views at mullions, transoms, corners, and typical head-sill conditions so my fabrication team can move straight to production. All dimensions, tolerances, anchor positions, gasket seats, and glass offsets have to be clear and coordinated with the architectural grid. A standard CAD format is fine; no special colour-coding or layer naming conventions are required as long as the layers remain logically organised. Please base the work on current industry standards for aluminium curtain walls (ASTM, CWCT, or equivalent) and deliver the original .dwg files together with plotted PDFs for quick markup. A...

I need 3 sketches of a 3-floor building converted into PDF format. Requirements: - Accurate dimensions and measurements - Electrical and plumbing details Ideal Skills and Experience: - Proficiency in creating detailed and accurate PDF drawings - Experience with architectural sketches, especially for multi-floor layouts - Attention to detail and precision

I’m finalizing an offshore wellhead and need a seasoned engineer who can own the full design package—from concept to manufacturable drawings. Key areas I want you to handle: • Structural design that meets offshore loading and fatigue requirements • Material selection suitable for corrosive, high-pressure environments • Built-in safety features that comply with API/ISO standards • Detailed manufacturing drawings ready for machine shops and class approval I’ll supply existing field data, pressure/temperature envelopes, and previous revision notes. You’ll translate these into a robust design, validate critical calculations, and deliver native CAD files, PDFs, and a concise design report summarizing assumptions, standards, and stress res...

I'm seeking an experienced AutoCAD designer specialized in 2D design for electrical control panels. Requirements: - Design control panels, including circuit breakers and switches - Modify existing designs and create new ones Ideal Skills: - Proficiency in AutoCAD, specifically for electrical designs - Experience with control panel design - Strong attention to detail and accuracy

I have a scanned, engineer-drawn drainage and structural plan that must be converted into a crisp digital file. All I need is an exact replica of what you see on the paper: • Every structural line drawn in solid black. • All drainage lines traced in red, following the highlighted arrows. • Existing labels copied verbatim—MH1, MH2, BL1, ML, Front Door, Pavement, and any others shown. • Manholes, gullys, stacks and similar symbols (if applicable) placed exactly where they appear. You’ll work from three reference images I’ve attached: the raw scan, one with drainage lines highlighted in yellow, and an example of a previously finished plan. The finished drawing should be supplied as a single PDF; any tool to draw this is fine, even if it's Pow...

I need a printable 3D file of a native Tasmanian hen that captures the bird’s form with moderate surface detail while still keeping the geometry clean and easy to print. The finished print should stand about 5 cm tall, so please scale the model accordingly and keep wall-thicknesses suitable for FDM and resin printers alike. Articulation requirements are straightforward: simple joints that let the neck and both legs rotate are enough. A snap-fit or peg-and-socket approach is fine as long as the parts move freely after a standard post-print clean-up; no complex hinging is necessary. Deliverables • STL (and, if you work in another native format, that file as well) • Exploded view or assembly diagram showing how the joints fit • Brief print-settings suggestion for ...

I'm seeking an experienced AutoCAD designer specialized in 2D design for electrical control panels. Requirements: - Design control panels, including circuit breakers and switches - Modify existing designs and create new ones Ideal Skills: - Proficiency in AutoCAD, specifically for electrical designs - Experience with control panel design - Strong attention to detail and accuracy

I need a complete set of permit-ready drawings for a residential pool that must satisfy the current Florida Building Code and any local county-level amendments. The package has to cover dimensioned plan views plus the key sections—cross-sections through the shell, longitudinal cuts, and enough enlargement details to demonstrate structural reinforcement, depth breaks, slopes, and deck elevations. Electrical bonding, plumbing runs, and equipment layout also need to appear clearly so the reviewer can verify entrapment avoidance and energy-efficiency rules. Please prepare everything in a clean, professional format (PDF sheets at 24 × 36 in.) and include the original CAD files (AutoCAD, Revit, or comparable DWG/DXF) so my engineer of record can add their seal. All drawings must be ...

I need a sma vab in Microstation which I've started, just need add in a specific shape which I have dimensions and will need to be placedat end of line it creates but shape needs always rotate based on line. And then we need to allow to b offset shape by distance define by user and creates a copy with option to be included box

I have a DWG drawing that represents a mild-steel (MS) fabrication and I need a clear, reliable breakdown of how much material is actually there. The task is straightforward: open the supplied DWG, analyse every object in the model space (nothing is to be excluded), and deliver the total surface area, enclosed volume and corresponding weight based on standard MS density. Deliverables • A concise table (Excel or CSV) showing the grand totals for surface area (m²), volume (m³) and weight (kg) of all objects. • A short PDF note summarising your calculation method, the density value used, and any assumptions needed to close the numbers (for example, whether hollow sections were treated as solid). Acceptance criteria • When I open your workbook and cross-che...

I’m refreshing the front of my villa and need a precise landscape plan drawn at 1 : 50 (metres). The frontage is flanked by two raised planters—10.00 m × 1.50 m on the left, 4.00 m × 1.50 m on the right—with the main gate centred between them and a garage sitting to the far right. Rear planter edges run straight 0.5m away from the boundary wall; the front edges should take on a soft, flowing curve. Both planters sit 200 mm above finished ground level, so please add the note “Raised planter +200 mm above FFL.” Style is Modern, and I’d like the planter surfaces shown as natural stone. Inside the long planter, You’re welcome to add a simple planting hatch if you feel it helps readability. Acceptance criteria / deliverables: • Dimen...

I’m bringing three leather bag styles—a backpack, a handbag, and a tote—to production and I need precise, factory-ready tech packs for each one. Your job is to translate my sketches and reference photos into clear documents that cover every measurement, panel breakdown, seam allowance, hardware spec, stitching detail, and material call-out a manufacturer will ask for. Please include layered Illustrator/CAD flats, front-side-back views, a colour-coded BOM, construction notes, and a graded size chart where relevant. If you prefer to work in another industry-standard program, let me know in your proposal; what matters is that the final files are fully editable and easy for the factory to follow. When you apply, attach a detailed project proposal that walks me through your...

I need a skilled CLO 3D specialist to create a production-ready digital prototype of a head innerwear balaclava intended for sports activities. My focus is on both the technical accuracy of the garment and its visual appeal, so please work natively in CLO 3D (or Marvelous Designer) and keep the model fully editable. Key points I want covered: • Material type – I’m aiming for lightweight, moisture-wicking performance fabric, so the simulation should reflect realistic stretch, thickness, and drape. • Design patterns – provide a clean, ergonomic cut that fits snugly under helmets while eliminating bulky seam intersections. Deliverables: 1. Native .zprj file with properly named layers, fabric presets, and particle distances optimized for export. 2. Flattened 2...

I have already fixed the cabinet envelope at 2000 mm wide × 700 mm deep × 2000 mm high and now need a full design package that will let me manufacture and source a multi-deck open chiller for the Saudi Arabian market. Your job is to turn that bare dimension set into a complete solution: select an appropriate refrigeration system that can cope with local ambient temperatures, recommend reputable brands that are readily available in the Kingdom, and present the whole assembly in a clean exploded view. What I expect from you • A 3-D CAD model of the chiller (SolidWorks, Inventor, or a compatible format) showing every major component. • An exploded drawing that makes the assembly sequence obvious to a fabricator. • A short technical note explaining why the chose...

WE need a detailed fabrication drawing for a mild steel conveyor roller support bracket. WE will provide a detailed sketch Requirements: - Accurate dimensions and specifications - Suitable for mild steel - Clarity in design for fabrication Ideal Skills: - Proficiency in CAD software - Experience with steel fabrication drawings - Attention to detail

I’m starting with a blank slate and need a skilled AutoCAD drafter to turn my architectural concept into a full set of 2-D drawings. Nothing has been drafted yet, so you’ll be building everything from the ground up, translating my written brief, reference images, and measured dimensions into clean, construction-ready files. The focus is strictly 2-D Drafting—no 3-D modeling or rendering is required. You should be comfortable laying out plans, elevations, and sections, setting up proper layers, line weights, and annotation styles so the files can drop straight into a permit or builder package. To keep things clear, here’s what I expect at minimum: • Floor plans, elevations, and sections drafted in AutoCAD (.dwg) and exported to PDF • Consistent layeri...

I'm looking to create a new brand of modern, minimalist, silver-based fashion jewelry. The collection will include necklaces, bracelets, earrings, and anklets. Key Requirements: - Design a cohesive, minimalist modern jewelry line - Create designs for necklaces, bracelets, earrings, and anklets - Use silver as the primary material - Incorporate modern and minimalist design elements however still needs to be very trendy Ideal Skills and Experience: - Proven experience in jewelry design, especially with silver - Strong portfolio showcasing modern and minimalist designs - Knowledge of current fashion jewelry trends - Attention to detail and creativity Please include a portfolio with your bid.