Gsm transmitter receiverεργασίες

I have a network 30 nodes 5 of them (nodes 1-5) have data to be sent to the receiver which is one node (node 10). Other nodes are relay nodes Each node has 5 different options for Bandwidths to be used and different options of frequency ( for now we can assume just one frequency option 1.5e11 Hz for simplicity and later you have to add the frequency option ) So the model should select the optimal path to the receiver and the optimal Bandwidth and frequency selection to minimize the energy consumption. I already did the mathematical model and I know the behaviour of the model and I need the RL model to have the same behavior. when the maximum cluster size is too small (1mm *1mm), the sensor nodes select a higher BW option ( e.g. 100 GHz) that would consume less energy compa...

...it and forward it to specific hardware of countrywide distributed DVB-C modulators ... to be generating RF-based UHF signals for cable-TV networks.... - like up to 893x locations so far we might be able to deliver directly by 50 mbit/s each using that DVB-x2 mux as MPEG-TS ... (it is always the same DVB-x2 MPEG-TS mux... but the RF-interface is different....- to be transmitting to the clients receiver ... it can be DVB-T2 as own network.. using a special hardware by the manufacturer.... they will tell us later how they want that MPEG-TS... - but we have even CHEAP dvb-C encoders oder modulators for local CABLE-TV operators... like we have manufacturers being able to manufacture/produce affordable 19" rackmount-kits for even less than 150,- US-dollars ... like having 2x 10GE ...

I'm seeking expert engineers to design and develop a comprehensive genset control unit. This project calls for multifaceted functionality, including: • Start/stop...This project calls for multifaceted functionality, including: • Start/stop controls • Remote monitoring and control capabilities • Fault detection and alarm systems Communication is key, hence the control unit should interface with GSM/GPRS and CAN. The ability to monitor all standard inputs from the genset, such as fuel level, oil pressure, battery voltage and more is essential. Ideal candidates will have solid experience in hardware and firmware development, particularly within control unit design and implementation for gensets. Proficiency in working with GSM/GPRS and CAN communicat...

Configuración vía remota de un Ejoin 512 Sim SMS USA Carrier LTE SMS Modem 64 Ports GSM Modem 4G Support US and Global Mobile Sim Cards for Send and Receive SMS ACOM664L-512.

In this role, my expectations include: -J1939 CAN Protocol establishment for a transmitter and receiver in a truck and bus control application -Development of effective and efficient communication software, using the C language to ensure fluidity and stability of protocol -Identifying any existing problems or bugs with the protocol, finding suitable solutions which aid in improving the project's overall performance The desired freelancer should have in-depth knowledge and experience concerning the C language coupled with a keen understanding of the J1939 CAN protocol. Familiarity with truck and bus control applications will be a significant advantage.

I am in search of a knowledgeable individual to design an RF transmitter circuit compatible with the rx480e module at frequency 433MHz. Importantly, I need the transmitter circuit to be simple yet effective, with the capability to cover a long-range distance of at least 3km to 5km. With 4 chanel. Key Aspects: - Long-Range Communication: The transmitter circuit should be designed to work efficiently over long distances - a minimum of 3km. - Simple Design: The design needs to be as straightforward as possible, without compromising functionality. - Compatibility: The transmitter circuit must be compatible with the rx480e module. The Purpose: This RF transmitter circuit will be instrumental for a remote control system that is able to control a small relay a...

Hello, I look for a specific company that produced STM32F407 PCB with LAN and 485 ports about 2 years ago, th...of assembled boards. I'll need the same team for forthcoming projects that I'll post here in Freelancer. The current requirement that will be used ONLY for proving skills: Short project for reading sms from SIM800L with ESP32 and search of a string with password inside the SMS. If password matches, ESP32 should send mail through wifi to given e-mail. C/assembler user for communication with GSM module, for e-mail can use Python. The work is completely software in Visual studio code , but candidates should prove that can build the PCB too. Software will be tested on my PCBs. Successful completion will add you as my preferred contact for forthcoming pro...

I'm looking for an experienced Arduino programmer to help me with a particular task. The primary aim is to write specific pieces of code that integrate an LCD screen and a SIM800L GSM module with my Arduino project. I want you to create a script for Arduino Uno R3 that with a 16x02 LCD screen with I2C bus will put ">/" at the beginning, there will also be three buttons: one in the middle, one on the right and one on the left. The one on the left will not do anything for the moment, the one in the middle will ensure that when you press it once, a "0" will appear right after ">/", if you press it once more, the "0" will be removed " and in its place a "1" will appear, if you press it once more, the "1" will be...

I want to create Google add on, which can be downloaded by different users. Work: to send multiple email to different users with custome message, attachment and title. These data located in Google spreadsheet which contains the field like name of email receiver, email id, title , name of file for attachment, message etc. There is no constraints for paid users while for free users daily email are limited to 10.

Παρακαλούμε Κάνε Εγγραφή ή Κάνε Είσοδο για να δεις λεπτομέρειες.

...Parameters: Public Key (String): (required) Obtained from Ship24Go Integration Menu. Private Key (String): (required) Obtained from Ship24Go Integration Menu. Sender Country (String): (required) ISO Code (Two Letters) e.g., IT. Receiver Country (String): (required) ISO Code (Two Letters) e.g., IT. Sender Zipcode (String): (required) Alphanumeric. Receiver Zipcode (String): (required) Alphanumeric. Sender State (String): (required) Two Letters e.g., TN. Receiver State (String): (required) Two Letters e.g., TN. Sender City (String): (required) Alphanumeric. Receiver City (String): (required) Alphanumeric. Weight (Integer/Decimal): (required) Integer or decimal type. Height (Integer/Decimal): (required) Integer or decimal type. Width (Integer/Decimal): (require...

...We need an addition to the software and application. We need a selection tab for RTCM messages. A tab in the application where the user can select the messages they want to activate. There will be messages that are already enabled by default and those that will be possible to select. This must be present in all software that uses GNSS. Regarding Radio Receivers, we have two models, the Radio Receiver without GNSS, and with GNSS. Only the Radio with GNSS will have this tab and the other will only have the 1008 message selector. ------------------------ These are the RTCM messages we will use. RTCM-1004 "Selectable" RTCM-1005 "Standard" RTCM-1006 "Selectable" RTCM-1008 "Selectable" RTCM-1012 "Selectable" RTCM-1032 "Selectab...

I need a programmer to create a receiver for for end to end monitoring of email infrastructures in accordance to the opentelemetry specification. This receiver will send emails via SMTP every 5 minutes (controlable) and retrieve the emails using a PoP3 account at the same frequency. The key requirements and tasks for this project include but are not limited to: - Generating and documenting metrics and logs from the email process, including: - The number of emails sent - The number of emails received - The number of failed email transmissions - Cycle time for each email between send and receive - for SMTP and POP3: Bytes Transferred, Bytes per Second, Connect Time, Lookup Time (when DNS Name is used instead of an IP Address), Response Time - log messages for

...Booking app with 3 modules (Carrier Module, Driver Module and Admin Module) Platform: Android and Web for now. (IOS later as a separate project). Carrier Module: Enable the carrier to create new trips and created multiple bookings under each trip. Should be able to assign a Driver to each trip. Also need payment Gateway and Whatsapp integration for bookings details to be shared with sender and receiver. I need a password based login, multiple language support, PDF printable format trip details for carrier. Driver Module: Driver should have visibility to the only Trip he is assigned with. He should be able to update the corresponding status of the trip. Driver Specific login details, mostly all details frozen. Admin Module: The master of all the above. You should be knowing thi...

Project Title: STM32F0 IR Transmitter Project Description: We are seeking a skilled developer to implement the Phillips RECS80 protocol, as described in the SAA3008 datasheet, on an STM32F072 microcontroller device. The project will involve utilizing the Keil compiler with STM Low Level Drivers (LL) to develop firmware for the IR transmitter. Please note that the project should not use the HAL driver. Responsibilities: - Implement the Phillips RECS80 protocol on the STM32F072 microcontroller. - Develop firmware using the Keil compiler and STM Low Level Drivers (LL). - Utilize the IRTIM peripheral on the STM device, with TIM17 for the carrier frequency and TIM16 for data transmission. - Interface the IR LED through an MMBF170 N-Channel FET on the GPIOB9 pin. Requirements: -...

...Looking forward to your proposals. More details: Smart home. The smart home system has the following parts. Transmitter Several buttons are connected to the ports of an Arduino Pro Mini. When the respective button is pressed, and the gate goes low, a signal is sent to the receiver. The signal is sent with LoRa. (RFM95 433MHz) The transmitter is powered by 3 AAA batteries or an equivalent battery. The power circuit is replaced with a circuit that draws very little power. see this video Create a Gerber file for the PCB. Receiver The receiver is an ESP32 Node MCU with both WiFi and LoRa. for example Heltec WiFi LoRa 32(V3). The receiver has relays, dimmers for led lights, (possibly a camera) and a button to pair the device. Power from USB. Co...

I'm looking for a professional with in-depth experience in microcontroller programming and hardware design to create a controller that's capable of operating through GSM, with a primary function of controlling electrical devices. Scope of Work: - Development and programming of the controller. - Setting up GSM operations for the controller. Ideal Skills: - Proficient in microcontroller programming. - Extensive knowledge of GSM communication protocol. - Experience in designing and developing device controllers. - Ability to create detailed project proposals. Please include a detailed proposal which demonstrates a clear understanding of the project's requirements and how you plan to achieve them in your application. All aspects of the project including t...

I'm seeking a skilled developer to create a Bluetooth S-Bus PWM module that would enable control of an RC vehicle from an Android application using a long-range class 1 Bluetooth receiver or transceiver W/Wifi Possibly using a ESP32 devise/module Key Components: - Create a Bluetooth S-Bus PPM module - Enable control from an Android application - Use long-range class 1 Bluetooth Rx or Transceiver Primary Functions on App: - Control of the vehicle's throttle - Control of the vehicle's steering Skills & Experience: - Expertise in Android App Development - Proficiency with Bluetooth Connectivity - Background in RC Vehicle Control System Development Turnaround: The ideal candidate will be able to deliver a fully functioning module within a month. The proposed dea...

Craft an A4 sized glossy magazine for a special 50th birthday project, designed specifically with the receiver in mind. - Design Focus: The magazine is for a single reader, the person celebrating the birthday, and should be personalized to their tastes and interests. - Available Content: All content, including text and photos, is already available for you to utilize. Your role will be focused on the design and layout, bringing together the materials into a cohesive and engaging format. ( if available please provide historic project references ) - Theme: The overall feel of the magazine should be both personal and luxurious, akin to an exclusive glossy magazine ( JFK magazine, Bazaar, Vogue, Elle Decor.) High end luxury - Skills and Experience: Ideal freelancers should have experie...

I am seeking an experienced and knowledgeable freelancer to develop a VOIP gateway, capable of handling both voice calls and data transmission. While the specific network type (GSM or CDMA) has not been finalized, your ability to work with either technology would be of significant value. Ideal skills and experience: - Strong understanding of GSM and CDMA technologies - Prior experience in VOIP gateway development - Capable of ensuring efficient data transmission and crystal-clear voice call quality When applying, while not mandatory, presenting details around your past projects, relevant experience, or a project proposal would aid in establishing your fit for the job.

...forespørgsel button, it should take you the the forespørsel formular section the page - then the send forespørgsel formular has to be updated so it is the same as it is on alba; se alba here: Note that: afdeling has to be just: Ikast. Remove københavn, odense, aalbor og hjorring. - Note:the forespørgsel formular has to go from a sender email and received on receiver email to be provided. vi) Kontakt os menu: -Kontakt os form is not working. Please test. I will provide send from email and receiving emails -add facebook and instagram -Add Fortrolighedserklæring link in kontakt os page (the present link is a link to alba-automotive page. Can you make this open a Fortrolighedserklæring page, where I will give you the text to the fortr...

I am looking for an expert who can design and develop a lawful SS7 SMS interception system or lawful GSM interceptor device. The device/software should only be focused on android devices. On a high level, the functionality I need includes: - Interception of SMS messages on Android devices - Focus strictly on SMS content extraction Key skills required: - Understanding of SS7/GSM interceptors and their workings - Proficiency in Android operating systems will be crucial - Experience in data extraction and messaging protocols - Respect for legality and ethical handling of data The final product should not tamper with any other functionalities of the target device, and should strictly focus on lawful interception and extraction of SMS content.

Основная задача собрать трекер или перепрошить существующий (подход обсуждается), чтобы данные с трекера отправлялись на заданный сервер. Трекер представляет собой батарея (заряд 5-7 дней), gps-модуль, gsm-модуль.

...called As Medical Device Reporting. The user who will be working on this request is known and GSM- Global Safety Manager. but our focus will be only on Feedback task- MDR is just an example. in the user story u can search for feedback task this may help u too. Please give me the source file in Visio and output as PDF. Start ur diagram from 2.1 before that its nut required, as a 1st step u can mention after 2.1 will be whether country is affected or not. as of now we r only considering feedback task and request. I hope u understand the call recording. In call recording u may heard one word MDR which is called As Medical Device Reporting The user who will be working on this request is known and GSM- Global Safety Manager. but our focus will be only on Feedback task-...

...devices. We develop already the firmware on it. We require a extremly experienced hardware vendor, who can take this prototype, the schematics and the layouted design to bring it to a final product. We will have different options of the devices (e.g. on radio support and on energy harvesting) The product includes: - ruggerized industrial waterproof case design - radio support for ...- wifi ...- GSM/LTE ...- GNSS ...- satellite communications ...- Bluetooth/BLE ...- ZigBee - internal / external antennas (later with waterproof connections) - powerplug (waterproof connections) - external sensors/actors connectivity - redundant batteries based on our capacity calculation - energy harvesting from PV and motion (you will require to provide us your experiences from other solutions) yo...

I require a robust Arduino Uno DLMS (Device Language Message Specification) Client Library. It should be designed to foster simple yet efficient communication with Smart Meters. Key Features: - Exclusively supports wired connections, no wireless functionality needed. Supported communication protocols: - RS232 (Recommended Serial) - UART (Universal Asynchronous Receiver/Transmitter) Ideal Freelancer: The perfect freelancer for this job should have a strong background in Arduino and embedded systems. They should also have in-depth understanding and working experience with DLMS/COSEM metering systems and the mentioned protocols. Outstanding proficiency in Arduino programming is vital as effectiveness, efficiency and readability of code is key. Please note, the successful ...

...camera, while utilizing the Arduino's built-in radio receiver to process PWM signals. Objectives: - Hardware Integration: -- Establish a seamless interface between the LattePanda's Windows environment, the Arduino co-processor, and the FLIR camera. -- Configure the Arduino's radio receiver to accurately decode PWM signals. - Software Development: -- Create a Windows application using the FLIR Atlas SDK (and in the future, the FLIR Science SDK) to issue commands to the FLIR camera (start/stop recording, potentially other functions). -- Develop logic within the application to translate received PWM signals from the Arduino into corresponding camera actions. - Data Handling: -- Implement streamlined data flow between the radio receiver, the Arduino, ...

I'm looking for an experienced electronics engineer to help me with a wireless transmitter. The device should have the following characteristics: - Primarily, it will be used for mobile devices, home appliances, and audio equipment. Therefore, some knowledge and experience in these areas will be required to ensure seamless integration. - The wireless transmitter should have a medium range capability. This means that it should be able to effectively transmit data signals to a distance of 100 to 500 meters. - Moreover, the wireless transmitter is expected to transmit data signals. Accordingly, having a solid foundation in data transmission and understanding the latest standards will be critical. An ideal candidate for this role should have a solid background i...

I'm seeking a talented animator to create a less than a minute, realistic...unique identification numbers. As the cows move around the farm, RFID readers capture real-time data from the tags. The data is transmitted to the receiver, then to the cloud, and finally to the data management system. [Scene 2: Face Recognition Technology] Animated cameras are shown strategically placed around the cattle farm, equipped with face recognition technology. As a cow approaches the camera, its face is scanned and identified. A notification is sent to the receiver confirming the presence of the cow in the farm. If a cow is missing for more than 7 days, an alert is triggered, indicating a potential issue. The data is transmitted to the receiver, then to the cloud, and finally t...

...(including the option for a free price), 2. selecting the number of motors (1 to 10), 3. setting the number of stock items (1 to 1000), 4. Stock reset button. EEPROM Storage: User settings should be saved in EEPROM. Out of Stock Notification: The system should indicate when products are out of stock. Technical Specifications: Power Input: 12V DC/AC. Microcontroller: ESP or STM microcontroller with GSM connectivity. Communication: Internet connectivity for displaying live stock on a webpage. Deliverables: - Functional Embedded System: Development of the embedded system with all specified functionalities. - Documentation: Wiring diagrams, functional code and its explanations, and user instructions, troubleshooting methods. Additional Information: - The system should be rob...

Title: Tracking Tec...Technology] RFID tags are shown being attached to the ears of cows. These tags contain unique identification numbers. As the cows move around the farm, RFID readers capture real-time data from the tags. The data is transmitted to the receiver, then to the cloud, and finally to the data management system. [Scene 2: Face Recognition Technology] Animated cameras are shown strategically placed around the cattle farm, equipped with face recognition technology. As a cow approaches the camera, its face is scanned and identified. A notification is sent to the receiver confirming the presence of the cow in the farm. If a cow is missing for more than 7 days, an alert is triggered, indicating a potential issue. you may have any quarry reg this project call us ...

This project purpose is to receive PWM signals from IA6B receiver, process them and control 5 output motors by these signals.

I am in search of a knowledgeable individual to design an RF transmitter circuit compatible with the rx480e module at frequency 433MHz. Importantly, I need the transmitter circuit to be simple yet effective, with the capability to cover a long-range distance of at least 3km. Key Aspects: - Long-Range Communication: The transmitter circuit should be designed to work efficiently over long distances - a minimum of 3km. - Simple Design: The design needs to be as straightforward as possible, without compromising functionality. - Compatibility: The transmitter circuit must be compatible with the rx480e module. The Purpose: This RF transmitter circuit will be instrumental for a remote control system that is able to control a small relay and through that relay ...

I am in need of a proficient hardware/software engineer to develop a logical transmitter system as per my specifications. The proposed transmitter should possess 4 inputs (2xPT100, 1x 0-5V, and 1x CAN) in addition to a 0-5V output. The transmission should be enabled via CANJ1939 communication. Project Requirements: - Proficient in C++ programming as it's our preferred language for this project. - Experience in both software and hardware development, specifically in creating circuits and programming logical operations. - The transmitter's primary function is to control a system. Hence, the professional should have practical experience in control systems design and implementation. - There are no size constraints for this device, giving the developer flexibility in t...

...the project promptly as time is a significant factor for this assignment. witht he folowing requirements it uses a stm32f446zet6 5 DRV8871DDA hbridge drivers and a IA6B connected via pwm - HB led, blink every second - receive con, on if signals being received from receiver input pins - drive active leds off when drive not receiving pwm signal and on when driving the motor. - drive con on driver pcb and main pcb on if and driver is receiving signals Channel 1 and 2 needs to have a roughly 2 second ramp up time. So if receiver sends a command for full --speed it takes 2 seconds to get there - Channel 1 and 2 needs to have a roughly 2 second ramp down, same as above just reversed. - rest of the channels are straight pass tru Please ensure: - You have prior experience ...

What specific functionality do you want the custom firmware to include for the GPS tracker? Firmware customisation on reachfar solar gps tracker model rf-v24 What specific customizations do you need in the firmware for the ReachFar Solar GPS tracker model RF-V24? Battery optimization, To turn off gsm and gps modules when not in use to optimise battery life. Tracking to be carried out on movement and by time schedule. How frequently would you like the GPS tracker to track the location based on movement or time schedule? Every 10 seconds when moving and a heartbeat location once a day with battery percentage. Any other requirements? The source code and development kit to be delivered with the firmware.

CubeSat satelite will be at least 550km above the earth. Elevation angle will be 20 degrees. LoRaWAN protocol will be used for the communication between sensor and CubeSat. Sensor could be any sensor like temperature and humidity sensor. Sensor transmitter power will be at least 23dBm. Tx uplink frequency will be from 148MHz to 150MHz (10 channels from 148.1MHz to 149.9Mhz with 200kz between channels, LoRa bandwidth 125KHz) RX downlink frequency will be from 137MHz to 138 Mhz ( total 3 channels, RX1 137.1MHz, RX2 137.3 MHz, beacon 137.1 MHz). LoRaWAN Protocol version will be 1.0.3. Sensor should support Clas A/B/C operations. Jobs that will be done: 1) Hardware Design of a LoRaWAN IoT sensor ( Schematic, Layout, PCB) for the given frequencies usin SX1276 chip 2) Custimization of LoR...

I need a comprehensive forensic report covering both mobile phone and computer communications. In my endeavor, I am naively striving to prove that I have never contacted a certain individual via calls, texts, or emails. Key Requirements: - Detailed examination of my devices (both mobile and computer) for traces of communication with the specified individual. - Extraction of Sender/Receiver details, notwithstanding any potential communication content. - Even though I am unsure about some specifics, I am keen on uncovering any contact information related to the person in question. Ideal Candidate: - Extensive experience in digital forensics, particularly in communications. - Proficient in data recovery and extraction from various devices. - Discreet, professional and thorough as ...

I am seeking a talented and knowledgeable individual to incorporate accelerometer, gyro, and compass fusion into a GPS receiver. The primary goal of this upgrade is to improve the motion detection capabilities of our current GPS system. I strongly prefer someone with relevant experience in electronics, engineering, sensor fusion technology and GPS technology. This is for identifying precise location within sampling pulse of GPS. Lastly, while this project does not have a strict deadline, it's essential that the candidate follows an organized and efficient workflow. Skills & Expertise Required: - Sensor fusion Technology - Electronics - Engineering - GPS Technology - Proficiency with different types of acceleration data is a plus.

I am in need of an experienced professional with a GSM interceptor device primarily for SMS interception. Key Responsibilities & Requirements: - Utilize device for comprehensive network monitoring, covering all sorts of networks, not limited to GSM, but also 3G/4G. - A deep understanding of network systems and GSM interceptor device functionality. Skills: - Experience with various GSM interceptor devices - Knowledge of network monitoring - Familiarity with different mobile network infrastructures Please be mindful that the use of such device is intended for lawful purposes only. This project offers the opportunity to apply and expand your expertise in this area. I look forward to your bids.

I'm looking to implement SMS and Whatsapp APIs in Java in order to automate business processes for International users (EU, US, CA, AUS). We should be able to specify the receiver number (with country code) along with the message. The messages are transactional (no bulk messaging). Key Requirements: - Integrate SMS and Whatsapp APIs from any cost-effective gateway into Java code. - Ensure the ability to send messages via SMS and Whatsapp to receiver numbers. - Create a reliable solution and demonstrate it working on numbers in given countries. Ideal Skills: - Experience in API integration, specifically SMS and Whatsapp APIs - Java

Title: Wireless Digital I/O Two-Way Controller with Battery Monitoring for Ag...monitoring capabilities, offers a comprehensive solution tailored to modern agricultural requirements, fostering innovation and efficiency in farming operations. List of Hardware • Raspberry Pi 4 • Raspberry pi pico for receiving end • Lora module for both transmitter and receiver • Touch screen for main node Software/Programing languages • Python is preferable • Arduino

...details of what I'm aiming for and the type of freelancer that would be the perfect fit for this project. - **Objective**: The primary goal is to hide all TV cords behind the wall for a clean, seamless look. The stucco wall should then be painted to match the existing walls, ensuring the area looks as if untouched. - **Equipment Integration**: - Installation of a 5 channel speaker system, receiver, DVD player, Apple TV, cable box, and a Sonos system. - Includes concealing existing wiring for 2 external video cameras system; all components to be neatly organized in a 3-piece media console under the TV. **Ideal Skills and Experience**: - **Professional Audio/Visual Installation**: Proven experience in wall-mounted TV setups, with a portfolio showcasing previous ...

I need an expert to prepare a detailed report on "camera as a receiver in visible light communication". This is for an academic assignment. I require the report to convey advanced technical details on the subject matter. While the report should cover all major aspects of VLC using a camera as a receiver, I have not specified any topics to prioritize. Thus, your expertise and suggestion on the content would be greatly appreciated. Ideal contractor should have: - Proficiency in technical report writing. - Deep understanding of Visible Light Communication (VLC). - Ability to explain complex technical concepts in an accessible manner.

...feature however they must be able to remain on when receiving the power signal) - I have included a few photos of examples of products as reference. Preferably we would like the lighted tag or device be as small as possible. One of the examples provided is referred to as a "fingernail sticker". We would like them that small or smaller. The system concept we have in mind is to have a central transmitter or reader that continuously sends the signal to the lighted tags so they can remain on without blinking. If you have experience in handling RFID / UHF technology, DIY electronics, or have a background in the automation industry, you'll be a perfect fit for this assignment. A comprehensive understanding of decorative lighting systems will be an added advantage. Li...

...technologically savvy professional capable of creating a GSM data receiver. This equipment should have the capacity to connect to any POS terminal within an impressive range of 50 meters and interface with ATMs via GSM. These are crucial functionalities for this project. Additonally, I require the creation of software that would allow devices to easily interact with the aforementioned equipment. This software should offer these primary functions: • Read data • Store data • Erase data Specifically, the software should handle transaction data and customer information. Key Features and Requirements: • Wireless Connectivity: The data receiver should be equipped with strong wireless connectivity abilities. • Multiple Device Compatib...

In this project, I'm seeking a talented PCB designer who can assist me in creating a robust circuit design. Key Responsibilities: - Designing a circuit according to my requirements - Proposing suggestions to enhance the overall functionality - Familiar with SAM-M10Q-00B gps receiver IC - Familiar with ESP32-S3-WROOM-1-N16R8 esp32 integration For this project you will need expertise in creating a circuit that will function as a DAC that can oscillate both a 1575.42Mhz and 1227.6Mhz respectively. There needs to be multiple of these circuits, driven by the esp32, and the DAC circuit that you build will route to connection. Circuit design and PCB design is needed.

I'm seeking a professional to craft a data receiver for my emerging business. This tool will be pivotal for data acquisition, specifically concerning customer-related information. Key Features: - The successful product will effectively draw data from our Point of Sale (POS) system. It should be designed to capture and process information accurately. - We need the data receiver to have the capability to export collected information into PDF documents. An understanding of PDF formatting and data compilation is therefore essential. The ideal candidate should have substantial experience in coding and integrating POS systems. They should also possess a background in creating interfaces for effective data extraction and management. Knowledge of document formatting into PD...

Παρακαλούμε Κάνε Εγγραφή ή Κάνε Είσοδο για να δεις λεπτομέρειες.

I want books made based on the following description. I will give the cover and interior design. 1. Hardbound 2. Landscape 3. 200 pages 4. 170 gsm 5. Colour print