Arduino midi controllerεργασίες

I have a laravel search form with 3 criteria , location, department and lawyer name. The form is working right if i select only location or department or lawyer name. If i select location and department i get wrong results. All the locations , departments and names are stored in different colums: Table lawyer: Lawyer name ,location, department_id1 , department _id2,departmen...departments and names are stored in different colums: Table lawyer: Lawyer name ,location, department_id1 , department _id2,department_id3 and so on. What i need is when i select location and department it have to show only the result based on the two criteria. Anydesk is required because the website is in local envoirement. Only bid if you are ready to start right now. I attached the form and the controller...

Build 3 Refractometer Sensor Assemblies for our prototype. The sensor will be integrated with a PCB, which will have other sensors. The purpose of the sensor assembly is to converts the refractive index of a food sample to % brix. OUR SPECS are as follows: ...SPECS are as follows: The sensor assembly - must not exceed 20mm x 25 mm x 15mm in size - CMOS or CCD sensor - Triangular prism - LED wavelength of about 600nm OTHER SPECS - 0 - 20 degree brix minimum - Precision ±0.1%; - Resolution 0.05% - Output Method: Digital - Sensor assembly must be calibrated and fully tested for correct reading. Important: We only need the sensor assembly and a micro-controller. So the deliverables are: - Sensor assembly, - source files, - Gerber files, - firmware, - Circuit and - CAD files - ...

I am seeking a freelancer who can create or modify existing Zabbix templates to monitor our Dell rack servers. I have full access and permissions to the servers, which are PowerEdge 11th, 12th and 13th Gen. The specific parameters that need to be monitored include virtual disks, raid controller, failed hdd, OpenManage and idrac. The ideal candidate will have experience with Zabbix monitoring, as well as knowledge of Dell rack servers and their monitoring capabilities. They should also have excellent problem-solving skills and attention to detail. This is a short-term project with potential for ongoing work, and I look forward to working with a skilled and reliable freelancer.

Project Arduino Completed.Details.

- extend an existing Webinterface with new function - work on the (serial) communication with a SAM7-Controller (on the same board). - improve the existing Javascript-Code. - replace the library 'autoconnect' with a more suitable lib.

We would need fully functional web INTRANET site. locally we own servers with Domain controller, Exchange server and now IIS on site. we would like to make portal for employees with windows credentials so we can share files (with each persons credentials), make global calendar, have poll and have news sector. The architecture is windows based. And all servers are Windows. Login on the site should be automatically with windows credentials.

ESP Mast...Shall we use the existing S1 port for this purpose? If not, we would like your recommendations 3. Experience heat beneath IO Expander IC in 4-Valve/8-Valve board. 4. May need to revisit the power draw of LEDs in master board 5. Sometimes ESP overheats with WiFi STA/AP mode. 6. Redesign existing Eagle project into Easy EDA 7. Provide adequate support for Firmware changes Slave/Wireless Pump Controller: 1. Handle ESP32 brownout/flicer scenarios when WiFi is turned On and sending HTTP request to master 2. Remove the 5V power supply to I2C FRC Connector. We may not need this anymore 3. Battery IC Overheating. Guess you suggested to change the resitor. 4. Replace unused sensor port with 12v Power rail. So we can connect Pressure sesnsor with I/P 10-30V and current outp...

Παρακαλούμε Κάνε Εγγραφή ή Κάνε Είσοδο για να δεις λεπτομέρειες.

Here is the code we are using currently & its working fine but we want to send the data to thingsboard Code: Connection Diagram : I am looking for a freelancer who has experience working with ESP32, Sim 800L, and GPS modules to create a location tracking system for asset tracking. The system should be capable of both real-time monitoring and data storage. Ideal skills and experience for this job include: - Experience working with ESP32, Sim 800L, and GPS modules - Knowledge of thingsboard for data visualization and analysis - Ability to create a user-friendly interface for monitoring

Good evening all, From the start i need someone that is familiar with the Unifi Ubiquiti controller from a Selling point of view. Someone who is specialized in marketing so it would sell. My company is actively selling subscriptions for Network Monitoring via the Unifi Controller Remotely. What i need is a Flyer on A5 or A4 that must contain details for 3 Subscription-Packages specified with Name / Options / Price / etc. Also including the company logo that will be shared with you at the start. The text on the Flyer should be editable, when for example the price or options change at a later time. The flyer should attract people for buying the subscriptions, so on a selling point of view, this should be attractive but still professional. Please show me your idea on the a...

I am in need of a freelancer who can fix my current PID code for my Arduino Nano board. The specific issue I am experiencing is incorrect output. Ideal skills and experience for this job include: - Experience with Arduino programming and specifically PID code - Knowledge of the Arduino Nano board - Understanding of current (voltage) control systems If you have the necessary skills and experience, please bid on my project and provide examples of similar work you have done. Thank you.

A newly bought tea packing machine has an electrical defect caused by incorrect wiring to a controller. We need to install a new controller while correcting the wiring. 2 live wires were connected to the controller instead of one so the old controller is broken now. So one of 2 live wires should be connected to the neutral.

Faw: Added controllers for full body. Deer: Added controller for full body. Adjustments and modifications are made according to the animation, If more modifications will required then we will do this in third phase where we will start making scenes. Phase 1 : Character Modeling Phase 2 : Script refinement and making some environments like home of bullhead etc. Phase 3 : Grouping scenes with respect to place and deploying characters into scene. Best wishes for you for your health. May Allah give you success and health. Muhammad S.

I am looking for a skilled expert who can assist me in upgrading my data center. The curren...the data center is medium, which consists of 10-25 servers. I require full assistance in planning and designing the upgraded data center. The expected timeline for the completion of the project is urgent, which is less than a month. Ideal Skills and Experience: - Experience in upgrading data centers, specifically with Cisco server UCS and VM ware - Expertise in migrating Oracle EBS R12, domain controller, and all existing software to a new system - Strong understanding of data center infrastructure and network architecture - Ability to provide full assistance in planning and designing upgraded data centers - Proven ability to work under tight deadlines and deliver quality results in a time...

Παρακαλούμε Κάνε Εγγραφή ή Κάνε Είσοδο για να δεις λεπτομέρειες.

Personal project requiring a programmer to develop a Programmable Logic Controller (PLC) with less than 10 inputs and output. Ideal skills and experience: - Strong knowledge of PLC programming - Experience with programming languages such as Ladder diagram - Familiarity with cx programmer - Good communication skills to ensure the final product meets the client's requirements.

I am looking for an experienced Arduino developer to create a program for controlling OV5640 cameras using the Arduino Uno platform. The program should be written in the Arduino’s C programming language and manage the API for the OV5640 cameras. I need someone who is knowledgeable in the field and can manage all the camera specs properly (set image quality, enable autofocus, etc) being able to take a photo and store it properly to an SD card. Your expertise should allow you to create a reliable and efficient program. I look forward to working with you on this project.

Hi, I need help with a small esp32 project. I need a function that connects the esp32 via wifi and http to a server and uploads folders and the containing files from an SD card. The project delivery is the function in Arduino IDE + the the php script for the server.

I am looking for a Freelancer who can help me with a project involving the coding of an Arduino microcontroller with other devices. This project is for a clock to countdown to a specific date based on input information from a membrane keypad, and I have a specific list of devices to be integrated with the Arduino. For this project, I am looking for a freelancer with Beginner level coding expertise. If you think you have the skillset I'm looking for, don't hesitate to submit a proposal!

I have a PIC controller and Microchip RN4870 BLE controller in a handset (Central) I have a PIC controller and Microchip RN4678-V/RM100 BLE controller in a headset (peripheral) I want both BLE controllers to appear as UARTs so I can pass short text strings, once per second. General requirements Devices simply pair, no authentication No power up sequence required for pairing No keyboard or UI required by user for pairing process

I have a handset (BLE central device) using a PIC controller and the Microchip RN4870 BLE controller I have a headset (BLE peripheral device) using a PIC controller and the Microchip RN4678-V/RM100. I need to be able both BLE controllers to appear as UARTs so I can send short text strings between them. General BLE Requirements Handset will only look for headset advertisement No authentication, just pair No keyboard or UI required No power up sequence required for pairing i.e. handset must be scanning before headset is advertising or vice versa. Thanks!

Need Firmware designer for raspberry, Arduino and pic

A raspberry pi 4 is connected to a pixhawk 6 flight controller running px4 autopilot. Raspberry Pi is equipped with a Picamera V2 in order to recognise a target and calculate the error angles angle_x, angle_y. I want a python script that continuously runs, and sends these two angles to the px4 autopilot, in order to execute precise landing. The python script that detects the target and calculates the angles has already been developed.

...prototype has undergone testing, but we have encountered a few minor challenges along the way. The primary tasks for this project involve optimizing the layout design and improving the system's overall efficiency. Additionally, we require assistance in incorporating an on/off switch into the design. This will involve the supply and testing of a new PCB. Currently, the system is programmed using Arduino, but we are open to suggestions for alternative approaches to enhance its performance. Our product utilizes a standard off-the-shelf wireless charger integrated into our custom PCB. The system operates on a lithium battery. The project is nearing completion, and we are seeking a talented freelancer who can help us overcome the remaining hurdles and bring the product to a c...

I want to make as small as possible Arduino push button audio & led Project. The logic would be that a user a on/off switch and the Arduino waits for the user to press any of up to 24 buttons. When a button is pressed a led light lights up for 2 seconds while an up to 5 seconds audio clip is running. Pressing any of the buttons will be ignored during this period. The audio files are unique and have a corresponding button. Ultimately if the project works I want to put it on a project board.

Hello, I am seeking somebody to help connect some Cisco Access Point (AP) units (cisco air ap 2802i) to a Wireless Local Area Network Controller (Cisco WLC 5200). I have the necessary equipment for the project, including the Cisco AP units and WLC. I do not require any specific configurations or settings for the connection. With the right expertise, I am confident that this will be a straightforward task for the right person. I look forward to connecting with someone who can take on this challenge and find success! Thank you.

I am seeking a freelancer who can help me make some minor adjustments to my existing soil sensors project using Arduino Uno. The changes needed are on both the code and circuit. As for the soil sensor's functionality, I require accurate readings and a quick response time with low power consumption. The expected outcome of the project is to give readings and crop recommendations. The ideal candidate should have experience with Arduino programming, circuit design, and sensors.

Hello Amir, as we talked we want to give you the Sbike Gaming Controller Project, the Base is similar as you did for the Rowing Machine, but this time for a Speedbike.

I am looking for a project cost controller to support a large construction project. The ideal candidate is experienced in managing large-scale construction projects, with a strong understanding of the industry. Responsibilities: - Develop and maintain project plans, schedules, and budgets - Manage project timelines and deliverables - Communicate regularly with stakeholders and provide weekly project updates - Ensure project goals and objectives are met within the established budget and timeline - Manage project risks and issues as they arise Skills and Experience: - Proven experience managing large-scale construction projects - Strong leadership and communication skills - Proficient in project management software and tools - Knowledge of construction industry regulations and stan...

To create a motor controller using an Arduino, you will need an Arduino board, a motor driver module, and a motor to control. Here's a general guide on how to set it up: Gather the necessary components: Arduino board (e.g., Arduino Uno, Arduino Mega, etc.) Motor driver module (common options include L293D, L298N, or DRV8833) DC motor or stepper motor Jumper wires Power supply (appropriate for your motor and motor driver) Connect the motor driver to the Arduino: Identify the pin connections on your motor driver module. Typically, it will have input pins for controlling the motor speed and direction. Connect the control pins of the motor driver module to digital pins on the...

...(No Apple Virtual Machine and/or Parallel’s environment accepted.) - Ability to work independently and in a team and must possess advanced English proficiency. - Electrical Engineering certifications a bonus (i.e. CESP, CPES, CESP, CSE, CSDE, etc.) Scope of Project: 1. Compile source code and program existing MCU/LED PCB boards. - MCU/LED HW files, C based source code, BOM and existing controller board to be provided to contract manufacturer. - Create/Configure development environment (STM IDE or equivalent with make file for STM32F103RCT6) 2. Update code to accommodate new features: - Removed switches need to be hardcoded to a specific functionality. - Consolidation of multiple on/off light buttons to only one on/off light button - Removal of battery – r...

Hi, I need help with a small esp32 project. I need a function that connects the esp32 via wifi and http to a server and uploads folders and the containing files from an SD card. The project delivery is the function in Arduino IDE + the the php script for the server.

I am an EE engineer. I have lots of experience designing both analog and digital circuits. In the field of simulation and PCB design, Proteus, PsPice, KiCad, and Eagle are softwares I have expertise in. I also have expertise with lots of past projects and examples in Embedded design for microcontrollers. Some of the MCUs I have worked with TI MSP430, PIC, Arduino, nordic semiconductors (i.e nrf52840), STM, MAX, etc. I am able to program devices using both Assembly language and C/C++ (both procedural and OOP). *for STM and nrf controllers Mbed OS could be one of the choices for programming the MCU. I have done lots of projects in the field of wireless communication and IoT using different wireless communication protocols like BLE, RF, WiFi (Cloud), etc. In the field of bit streami...

Bonjour ! Je recherche un freelancer compétent pour collaborer sur un projet passionnant à l'université. Le projet consiste à concevoir et développer un pot de fleurs intelligent équipé d'un capteur d'humidité pour un entretien optimal des plantes. Ce pot intelligent révolutionnera la manière dont les plantes sont nourries en veillant à ce qu'elles reçoivent la bonne quantité d'eau en tout temps.

Dear Lalith, Following our discussion, I am pleased to present this proposal for the development of a comprehensive dashboard on MS Azure, specifically designed to integrate and visualize data from the GENSET Controller DSE8610. To initiate the development process, I kindly request you to provide me with the MODBUS Register List, which will serve as the foundation for data acquisition and integration within the dashboard. Additionally, I will require your MS Azure account login credentials to establish the necessary connections and configurations. Furthermore, in order to ensure seamless integration and setup of the required settings in the RUT955 device, I kindly request remote access to its WEBUI. This can be achieved through the utilization of either the RMS or the Zero Tier V...

I have a system that I use an analog potentiometer to control the length of time between change in relays turning on and off. I would like to be able to install a wireless digital potentiometer controlled by remote into the circuit instead of the analog. Need someone to help with this process. Thank you

I am looking for a freelancer to help me import an ESP32 project from Arduino IDE to Eclipse IDE for C/C++ Developers. I already have Eclipse installed and configured. The main functionality of my project is Bluetooth communication. The ideal candidate should have experience with ESP32 and Eclipse IDE for C/C++ Developers. The project includes the following tasks: - Importing a working project from Arduino IDE to Eclipse

I am looking for an experienced embedded C++ programmer to develop software for an Arduino-based project. The project requires proficient knowledge in embedded systems and should be able to complete the software development in less than a month. The project can involve development of device drivers, integration of hardware components, or writing algorithms for a specific purpose. I expect the programmer to have an understanding of the distinct requirements of this type of solution, such as working with memory limitations, power requirements, and processor speed. Prior experience with Arduino programming and working with embedded systems is preferred. To successfully complete the project, I'm looking for someone with knowledge in debugging, data structures, computer archi...

I have a web app deployed into a Kubernetes cluster on MS Azure. My domain is hosted on Cloudflare. I have added an ingress controller with a subdomain and attached the SSL certificate from Cloudflare as a secret, but the domain is not loading over https. I want someone to look into this and fix it.

Have a Firewalla gold router and firewall. Using Omada EAPs, 1 managed Omada switch, 2 unmanaged netgear switches, and Omada oc200 controller. Looking for 2 deliverables: 1. Create VLAN for IoT devices 2. Setup 1-way communication so devices on main network can access printer/Roku/etc on IoT VLAN

I am using Windows Server 2019, and I cannot connect to the domain controller I need some help right now through teamviewer or anydesk

we have to develop an arduino program which will have the clock handle which will show the position of the sun in the sky. This can be achieved using the data which is already available on the internet based on the location what exactly the sunrise time, what exactly the sunset time and how much sun position increases every few seconds using this we have to change the position of the clock handle and should point to the exact position of the sun in the sky.

Need temperature be able to calculate an avreage reading for a set then to change the output polarity accordanly.

We are seeking an Arduino expert to assist with a data logger project. Our project requires the use of pressure sensors. Our desired frequency of data collection is as fast as possible. We expect the battery life for our data logger to be 1-2 weeks. Ideal skills and experience for this job include: - Strong knowledge of Arduino programming - Experience with pressure sensors - Understanding of power consumption optimization for battery-powered devices - Ability to design and implement a reliable data logging system - Experience with data analysis and visualization tools is a plus. - Using an RTC to log the data with present time - Small local display that can show the present value on screen if required. - Suggest some NPT 1/4'' or 1/2'' For our pressur...

I am seeking an Arduino programming expert to work on my specific project. The objective of the project is not specified, but I have a rough idea in mind. I require someone with experience in home automation, robotics, and sensor integration. The timeline for completing the project is also not specified. Please provide your expertise in Arduino programming and your availability for this project. Thank you.

...to make sure before we go to interview if u have following skills We need a backend developer (huge plus if you are full stack developer) with 3+ years’ experience, with the following skills and requirement: - React Js (must), Flutter (big plus), Client-Server communication, CSS, HTML, JavaScript, Firebase, Know to create image viewer, Know to create Swipe frames and images, MVC (Model-View-Controller), Object Oriented Knowledge in the following tools is required: - React js framework, GitHub, Postman I need developer that have all of the above skills and ready to work with them from the first day. If you have all skills above, we can proceed to interview and if everything will go fine in interview we can start working together. The work from Saturday to Wednesday, 4 h...

? Seeking Freelance Projects: Expert in C/C++,C#, QT, VS, Embedded C, Electronics, Arduino, RPi, ESP32 ? Hello there! Are you looking for a highly skilled and experienced freelancer to handle your C/C++/C# projects? Look no further! I am here to offer my expertise in a wide range of technologies including C, C++,C#, QT, Visual Studio (VS), Embedded C, Electronics, Arduino, Raspberry Pi (RPi), and ESP32. With my in-depth knowledge and hands-on experience in these domains, I am fully equipped to take on diverse and challenging projects. Whether you need assistance in developing robust software applications, implementing advanced features, or working on embedded systems, I am your go-to professional. Here's what I bring to the table: ? C/C++ Expertise: I have a strong ...

I am looking for a freelancer who can help me integrate Bluetooth functionality into my Android app to connect with Arduino/STM32 device. The ideal candidate should have experience in Bluetooth integration and knowledge of Android app development. The project will only involve Bluetooth integration and not the entire app development. The end goal is to create a seamless communication between the app and devices for data exchange as well as effective integration with the App services. I have the source code of my App

I am looking for a freelancer who can help me set up a self hosted Bitbucket Data Center on EKS using terraform. The scope of the project is to do a research on what are the core components needed such as open search, RDS(mysql), EFS. make sure the eks cluster is fargate based and we should be able to use ingress controller follow the all the six pillars of AWS cloud for best practices. write all the related resources into modules. make sure the bitbucket configurations and setting are preserved and persist, as this eks bringdown and up on we are not expecting any configurations such as AD intergration, users, groups...etc missing High avaialblity, scalbility acheived Note: we are not looking for bitbucket server. we are intended to setup Data center

Arduino Dw1000 proximetry sensor I am looking for a freelancer who can assist me with developing a software for an Arduino Dw1000 proximetry sensor. The following are my project requirements: - The desired range of the sensor is up to 10 meters. - I require assistance with developing the software for the sensor. - The preferred programming language for the software is C++. Ideal skills and experience for this project include: - Proficiency in C++ programming language - Experience in developing software for Arduino boards - Knowledge of the Dw1000 proximetry sensor. #include <DW1000.h> #include <DW1000Ranging.h> #include <WiFi.h> // WiFi credentials const char* ssid = "YourWiFiSSID"; const char* password = "YourWiFiPassword";...