Stm32 ethernet designεργασίες

...διάταξης IT-4403; Αν ναι, δώστε ένα παράδειγμα για το πως αυτό θα μπορούσε να γίνει. 2: Για ποιο λόγο πιστεύετε ότι το βοηθητικό λογισμικό απαι-τεί τη σύνδεση του αποστ&omicro...

We need support with HUAWEI S5731-h48T switches. Specifically, starting from a reset switch, we need to understand: A brief, concise introduction on how the configuration works in general. How to enable SSH connection on all switch ports: 2.a. How to change the default port for SSH connection. How to enable the WEB interface on all available Ethernet ports. How to set ports to TAG mode, both via command line and WEB interface. How to set ports to UNTAG mode, both via command line and WEB interface. How to export and reload the configuration. DETAILS: The support operation must be performed via TEAMVIEWER connection to a laptop that is connected via SERIAL to the reset switch. At the end of the work, we need specific commands along with comments and best practices. Upon co...

I'm looking for a highly skilled QT senior development engineer to help build a desktop application. This project will tap into your expertise in various areas such as C++ programming, the QT framework, and user interface design. Key Skills & Experience: - Strong proficiency in C++ - Extensive experience with the QT framework - Excellent User Interface (UI) design skills - Knowledge in Python and 3D will be a plus The main function: 1: Windows platform, jointly developed by QT+python. 2: Communicate with hardware devices through serial port/Ethernet. 3: Support MODBUS-485, TCP, UDP and other communication protocols, with 1ms cycle response. 4: Support hardware parameter configuration, multi-channel data analysis, storage, data playback, and support real-ti...

Hi, this is the first milestone for the new project. It's just a review of the topic. 1. Initial project review £20. I know you’ll need to spend some time researching the ethernet interfaces. I think it’s best that we aim to produce a Modbus TCP interface. I’m paying you to spend some time looking into that. The idea is to find any problems with the approach I’m suggesting before we start.

Develop schematics, PCB and firmware for a compact NFC reader. The suggested RFID controller is PN7160. Microcontroller - STM32 0) Two boards - antenna and the main board. The antenna diameter is 15mm with a hole in the center 4-5mm. The main board is 14mm in width and length is 35mm or less. 1) The reader must read and write password-protected memory blocks in Mifare Classic cards. 2) The reader keeps the password for the RFID cards as a hard-coded constant. 3) The reader has an 4-byte reader ID stored in its EEPROM memory. 4) The RGB LED on the edge of the main board, whose location matches the hole in the antenna. RGB LEDs are connected to the PWM pins of the controller. 5) A waterproof (if possible) speaker must be on the opposite edge of the main board, closer to one side to l...

...firmware developer specializing in STM32 microcontrollers. I already have arduino Mega tested code which i need to convert into stm32 family Key Project Details: - Specific STM32 Model: The project will involve firmware development for a specific STM32 microcontroller model. - Application/Use Case: While not specified, the project likely involves a real-world application within the realm of consumer electronics, industrial automation, or wearable devices. Skills & Experience: - Prior experience with STM32 microcontrollers is essential. - Proficiency in utilizing various communication protocols (e.g. UART, SPI) and integrating sensors would be a plus. - Familiarity with power management techniques is highly desirable. - Experience with the speci...

I'm seeking a well-experienced developer who understands STM32 and IoT. This job focuses primarily on Ethernet connectivity to achieve optimal functionality. While not necessary I will favor developers who have the hardware at hand and can test themselves before finalizing the project. Any prior experience in Embedded development, File transfer, Network communication would be an added bonus. Key objectives are as follows: - Establish Websocket connection to public domain - With Wiznet W5500 and STM32 microcontroller. The ideal candidate should have: - Proficiency in Wiznet development - Proficiency in STM32 development - Extensive experience with Ethernet connectivity - Understanding of data transfer speeds and protocols. - STM32 and...

I looking for someone to design a PCB to include an MCU, Wifi module, and some headers Key Requirements: - The PCB should have an STM32 microcontroller (MCU) to carry out basic functions. - The design should incorporate an ESP32 Wi-Fi module for internet connectivity and a motor controller. - The complexity of the project is minimal. Deliverable: Using EasyEDA to design the PCB, I ask to receive a copy of the project, Gerber files, BOM, Pick and Place, and any other files required to manufacture the PCB. Ideal Freelancer: - Proficient in PCB design. - Experience with integrating MCUs and Wi-Fi modules. - Able to deliver a simple, no-frills design that works effectively. Please provide me with your quotes and examples of relevant projects you...

...particularly for STM32 microcontrollers (specifically the NUCLEO-G491RE model) and ESP32 microcontrollers (specifically the ESP32-DEVKITC-32UE). It needs a certain amount of inputs and outputs to begin with, but also minimum 2 outputs with PWM-control or analog 0-5V, as the motorcontroller of choice works with PWM or 0-5V inputs. Also 2 analog inputs 0-5V for 2 kinds of safety edges. Find also the list of peripherals in the attachment. The pulse generated by the motorcontroller won’t exceed 500 Hz with our current motor/motorcontroller configuration. (see peripheral list: section motorcontroller) In total we need to have: Digital inputs: 12 Digital fast inputs (counter): 2 Analog inputs: 2 Digital outputs: 6 Analog outputs: 2 Key deliverable: A fully programmed NUCLEO-G491...

...process control system. Key Points: - Model: 100-PLC-010/020 - Purpose: Process Control - Required Communication Protocol: Ethernet/IP Your responsibilities will include: - Setting up the PLC in a way that ensures the smooth operation of the process control system. - Configuring the system to align with the required Ethernet/IP communication protocol. - Conducting thorough testing to ensure the system performs efficiently and effectively. The ideal freelancer for this job should have: - Proven experience in PLC programming, with a focus on process control systems. - In-depth knowledge of the 100-PLC-010/020 model. - Expertise in configuring PLC systems to integrate with Ethernet/IP communication protocols. If you believe you have the skills and experience to s...

- Communicated bluetooth function on esp32 - able to connect stm32 master

I'm seeking a proficient developer with experience in Raspberry Pi Pico, USB ethernet programming, NTP (Network Time Protocol) clients, and web server development. Integrate existing open source libraries to achieve the following objective. - Project is completely hosted on a Raspberry Pi Pico board using Arduino IDE, FreeRTOS, and libraries. - Creates an Ethernet endpoint when USB is connected to a Fedora Linux host PC. - NTP client enabled to obtain accurate Global time synchronization. - Web server with a single page offered which display a "Hello World" page with current date and time, and a drop down box where the host can set the time zone. This RPI Pico web page is accessed from FireFox on the Fedora Linux host.

I'm in need of a proficient PHP developer to create a custom code for communicating with an Ingenico POS terminal via Ethernet. Here are the specifics of the project: - **Communication Method:** The primary method for the communication is through Ethernet. You need to be well-versed in this type of communication to tackle this task efficiently. - **Transaction Handling:** The main purpose of the code is to transmit the amount to the terminal and verify if the transaction can be successfully processed. **Requirements**: - experience in PHP - Prior experience with Ingenico POS terminals or similar devices is a plus Please note that this project is solely for the communication between the system and the terminal. There is no need for integration with the banking systems...

Hi Aryan R., these are the two projects: 1) adding Rongta network ( Ethernet and wifi ) connection - Milestone 1 : $200 2) Changing invoice and payment page template to show slide show on the half left side : Milestone2 : $50

I need a PCB designer (KiCad) for modify original design of a STM32 Nucleo64-Board(F302R8/F303RE) in order to add 2 MAX1487 on USART1 & USART3. I already have a working prototybe as a "hat" form factor for the nucleo, so the purpose of this mission is to merge our prototype schematic into the Nucleo schematic and supply a complete KiCad project ready for production (Gerger + steps to reproduce)

Παρακαλούμε Κάνε Εγγραφή ή Κάνε Είσοδο για να δεις λεπτομέρειες.

I need a highly competent developer experienced in RS232 and RJ45 Ethernet for a specialized project. The principal purpose of this project is to convert serial data to Ethernet data. This data conversion is specifically tailored for Industrial control systems. Key competencies and preferences: - Expertise in RS232 and RJ45 Ethernet. - Familiarity with TCP/IP and Modbus TCP because these are the communication protocols the server host needs to support. - A strong background in industrial control systems development. The desired outcome of this project is a seamless data dialogue between devices via Ethernet. Can't wait for your input.

We are looking for a professional with skill and experience in C programming language in embedded code for RF transceiver modules, particularly experienced with NTR09RSL8 and NTR09CSL8 868MHz LoRa RF Transceiver modules. Your task is to develop and test code to accurately depict their abilities and li...are the basic requirements; 1- SX1262 drivers should be used (from Semtech) 2- Test Code (for the flowchart/detailed requirements which will be provided to engaged candidate) should be tested in Nucleo-L432KC or Nucleo-L476RG 3- Deliverable is the Test Code Ideal Skills and Experience: - Proficiency in radio frequency transceiver modules particularly NTR09RSL8 and NTR09CSL8 - Experience with STM32 Platforms, Nucleo-L432KC or Nucleo-L476RG experience is a plus - Testing and debuggi...

PCB design for a scale with a 4G module to send results to WebServer using HTTP Post. Circuit is intended to be powered from battery with a support of solar panel. MCU will STM32 and 4G GSM module will using SIM7000

...Requirements: - The product should be compatible with medical equipment in a way that it can seamlessly drive a 24V wheelchair. - The joystick controller and the driver unit should be a complete, integrated system. Communication Interface: - I prefer a programmable microcontroller and driver unit that can communicate with UART communication protocol Ideal Skills: - Proficiency in industrial product design, especially joystick controllers and driver units. - Experience in medical technology will be a valuable asset. - Knowledge in wired communication protocols like UART is essential for the job. the most important detail of the project as follow : A-the part we already done and proven its functionality : 1-the wheelchair are driven by dual DC motors and power with 24 vol...

...following: 1. Connecting a POS computer, monitor, receipt printer, USB card reader and providing remote access to our helpdesk so our techs can configure the system. Work with our helpdesk to test the printer, touchscreen and card reader. 2. Connect a USB camera that measures foot traffic and work with our help desk to configure and test. 3. The building contractor has already set up Ethernet cables and a patch panel. Ideally, you will have tools in case one of the jacks doesn't work it can be tested and crimped quickly instead of having to reschedule the cabling contractor. 4. Install a 24 port PoE switch (provided) on a rack and connect patch cables (provided) to the switch (need screwdriver). 5. Test Internet device provided by ISP and provide our helpdesk ...

I am in need of a professional who can efficiently handle an RS485 device that requires reconfiguration. The scope of this project includes: - The procurement of a ready-made RS485 to TCP/IP Ethernet serial server converter - Installation and configuration of the converter with the RS485 device - Ensuring smooth and effective communication between the RS485 device and the TCP/IP Ethernet serial server Preferred skills and experience: - Proficient in working with RS485 devices - Strong knowledge of TCP/IP Ethernet serial servers and hardware programming - Prior experience with Modbus TCP - Familiarity with Arduino, Raspberry Pi, and ESP8266 Your responsibility will strictly be focused on setup and reconfiguration; no modifications on the RS485 device will be necess...

I am looking for someone skilled in the field of STM32 programming, with expertise on Wiz5500. We already have a working firmware running on our custom PCB that uses the Wiz5500 to display a web page with basic interfaces. The project consists in modifying that firmware to integrate two new features : 1) After sending data from webpage to mcu, we cannot use the web browser refresh button because it re-sends the data again. We want to fix this by either re-directing automatically to the main webpage after sending data or some other way you can propose. 2) We want to synchronize the mcu with the local time. This can be done by synchronizing with the NTP server or some other way you can propose. We would like the webpage to keep working during the synchronization with NTP serve...

I'm in need of an expert in embedded C program...experience with USB communication protocols. Your familiarity with Keil MDK 6 is also crucial as it will be the primary IDE used for this project. A background in working with STM32 microcontrollers will be a big plus. In summary, the main tasks for this project include: - Design and implementation of a Virtual COM via USB - Developing Embedded C code for the STM32F411 (Blackpill board) - Integrating the project within Keil MDK 6 - Ensuring that the code meets performance constraints The ideal candidate will: - Have deep knowledge of embedded C programming - Be experienced with Keil MDK 6 - Have worked with STM32 microcontrollers before - Be able to work under performance constraints - Clearly communicate through...

...implementiert werden. Das Projekt soll in CubeIDE von STM aufgesetzt werden, zur Bearbeitung der C-Files können aber auch andere Tools benutzt werden. Die Software soll möglichst Hardware unabhängig und Modular aufgebaut sein. Sie soll sich einfach in bestehende Projekte einfügen lassen, gut konfigurierbar sein (z.B. über Defines in einem zentralen File), einfach portierbar sein auf andere MCUs der STM32 Familie, einfach erweiterbar sein auf externe Flash-Bausteine und der Progammcode soll gut lesbar und kommentiert sein. Es sollen auch Sonderfälle wie zum Beispiel plötzlichem Spannungsausfall berücksichtig werden und entsprechend abgefangen werden. Die Bezeichnungen im Programmcode und die Kommentare sollen in English sein, die Abs...

...CM4 carrier board design The project consist in the design of a CM4 carrier board whit specific requirements. All connections with ended with JST connectors, (except the antenna of the AIS, to be decided). The original idea is starting from a existing CM4 carrier board ‘open source’, and modify it to add/remove elements, also ‘open source’. Most of the requirements can be found in any CM4 carrier board available with a public license, for exampe CMIO from raspberry pi. Description of the elements, interfaces and other requirements follows • Maximum board size 100mmx200mm aprox. • Power souce 12v, protected and converted to other DC (present in CMIO) • USB-C with mini USB conector for programming (present in CMIO) ...

...that is specifically designed for Raspberry Pi Compute Module 4. Features: - It should include an Ethernet - Type-C USB port power power. - We're also looking at equipping it with a 4G mobile module (SIM7600 or equivalent that work in Australia/Telstra). - 1 X Sim slot. - 2 X External antenna connectors SMA - 1 X Power LED for CM4 - 1 X Activity LED for CM4 - 1 X Multicolour LED for signal strength of mobile module. - The carrier board should be made as small as possible. Skills and experience: - Freelancers interested need proficiency in electronics and PCB design, along with a deep understanding of Raspberry Pi Compute Module 4. Experience in custom carrier board design and SIM7600 or equivalent 4G mobile module that works in Australia on ...

I'm in need of a Standalone STM32 SWD programmer that can flash firmware without the need for connection to a computer. The programmer should be powered by a battery. The binary firmware files will be on a SD card with an XML file with the processor type to prevent it being loaded on an incorrect processor. The unit will have buttons and LED's to start the process and indicate the progress and supply 3.3v to the processor board There a number of projects on github that could be used as a starting point such as Key Requirements: - Stand-alone Programming: The system should be capable of flashing firmware into STM 32 microcontrollers without the need for a computer connection. - Battery Powered: I require the programmer to be powered by a battery. Ideal

I'm in need of a Python programmer who can assist me in gaining a comprehensive understanding of network traffic management in Ethernet switches. I have no previous knowledge in networking or any competence in Python, hence the selected candidate must: - Have substantial experience in Python programming - Proficient in Ethernet switches and network traffic management - Demonstrate excellent teaching skills to a beginner. Please note that this job will not only require you to possess these skills but also have the capacity to teach and explain them simplistically. I am a swift learner. However, bear in mind that I am a novice in this field. Your patience and ability to break down complex tasks into simpler, understandable portion will be highly appreciated.

...developer who understands STM32 and IoT. This job focuses primarily on Ethernet connectivity to achieve optimal functionality. Key objectives are as follows: - Establish Websocket connection to public domain - With Wiznet W5500 and STM32 microcontroller. It's not necessary for this project, but any prior experience in File transfer, Network communication, and Remote device management would be an added bonus. The ideal candidate should have: - Proficiency in Wiznet development - Proficiency in STM32 development - Extensive experience with Ethernet connectivity - Understanding of data transfer speeds. Your job will be to write an optimal code, preferably in STM32CUBEIDE or Keil MDK Arm. The Wiznet W5500 is connected to STM32 via SP...

I'm looking for a skilled developer to create a simple graphical user interface specific...The interface should be designed to run on the STM32H7 CPU, ensuring optimal performance and compatibility. - The primary purpose of the GUI is to display system status and temperature information. It should do this in a clear and easy-to-understand manner. Ideal skills and experience for this job: - Proficiency in GUI development, particularly for embedded systems - Strong understanding of STM32 microcontrollers and their associated toolsets - Experience in designing UIs for information display purposes - Experience using ST TouchGFX software - Must know how to program C++ in GCC using STM32CubeIDE - Working with 2 cores, one collecting the data in real time, the graphical display on...

Title: Ethernet/IP (EIP) Slave Developer (.NET Core) Responsibilities: Develop an Ethernet/IP (EIP) Slave implementation using .NET Core and C#. Ensure compatibility and compliance with the Ethernet/IP specifications and standards. Integrate the EIP Slave functionality with the provided client for testing purposes. Implement data exchange mechanisms to communicate with the client device using Ethernet/IP protocol. Develop error handling and recovery mechanisms to maintain robust communication between the slave and client. Collaborate with the team to understand requirements and provide input on system architecture and design. Write clean, maintainable, and well-documented code following best practices and coding standards. Test the EIP Slave implementat...

I'm looking for an experienced developer who can create a program for an STM32 microcontroller. The program should integrate a sensor for distance measurement and the data should be processed for monitoring purposes. Key Requirements: - Develop a program for an STM32 microcontroller that seamlessly integrates a distance measurement sensor. - The program should be designed to continuously monitor the distance values received from the sensor. - The data collected should be easily accessible for further processing and monitoring. - The program should be efficient and optimized for the STM32 platform. Ideal Skills and Experience: - Proficiency in programming for STM32 microcontrollers. - Experience in integrating sensors to microcontrollers. -...

I am looking for a freelancer with extensive experience in setting up a connection between Omron CJ2M-33 CPU and Indusoft (Aveva Edge) using ethernet. The goal is to execute control operations utilizing this connection. It is paramount that the successful applicant is competent in operating with Aveva Edge 2020 SP3. Skills & Experience: - In depth understanding of Omron CJ2M-33 CPU - Proficient in Indusoft (Aveva Edge) 2020 V20 SP3 - Experienced in ethernet connections - Knowledge in control operations Please highlight your relevant experience and previous similar projects in your application. Also, please specify which driver will you use and why. This is to ensure that you can provide the level of expertise and efficiency required for this task. Your offer will no...

Elaborar un documento en formato Word que contenga: Un proyecto para revisar el desempeño de una red este Proyecto debe contar con los siguientes requisitos: ➢ Conexión WiFi o ethernet ➢ Equipo con Virtual Box instalado ➢ Equipo con Pandora FMS Community (virtualizado) ➢ Equipo con Windows 10 de 64 bits ➢ Protocolo SNMP habilitado en el equipo con Windows 10 y activo ➢ Agente de Pandora FMS para Windows 10 de 64 bits instalado y activo ➢ Permisos de administrador en el equipo

Looking for a stm32 + nextion programmer, extensive experience in inkjet printers, if it does not meet the specifications I will not award the project. I already have firmware that I need to integrate more functions and update. Add more functions to the project - ink system controls - level control - control and maintenance - humidity control - ink flow control - lamp control - roll to roll

I need to create a console project in C# Net Framework that I can listen the data from an equipment Mindray BC-20s and / or BC-30s. Using Ethernet configuration and HL7. The data that comes from the clinical equipment needs to be save it on txt file. The configuration is using TCP/IP and I need - Port for every equipment Any questions? I made a console project but I could no be able to get the results from those equipments. I need a person who had been working with HL7.

We are working on a power converter board and looking for an expert in MCU stm32. We are using the stm32G474ret6 and having several issues that we are not being able to explain . The main issues are : startup state of MCU systick clock for hal_delay non functional Debugger resetting MCU in middle of operation code not stored in memory after powercycle . We are looking for somebody that is very used with stm32 MCU and know about electronic schematics and circuit for mcu integration on PCB .

I'm looking for a Python expert who can assist me in setting up real-time video streaming and data transfer from Raspberry Pi 5 to a PC over a static network configuration. The project involves an underwater camera and...and background working with Raspberry Pi devices and the picamera2 library. I have the operational hardware setup in my office and can perform the UDP communications however I cant figure out video streaming using the picamera2 library. Everything is working and I can get udp communications between PC and RPI5. The camera on the rpi5 is operational. I am powering the rpi5 through a ethernet-coax-ethernet converters and POE however it behaves exactly as a direct network connection. You will require your own RPI + camera to get your code working then ...

I'm seeking a skilled technician to elevate my Ethernet speed, aiming to significantly improve my PC gaming experience. Currently, I am having trouble with slow download speeds. The perfect freelancer for this project would have: - A comprehensive understanding of internet connectivity for PC gaming - Proven experience in resolving issues related to network speed - Good knowledge of Ethernet-related technologies Main Tasks: - Identify the cause of slow download speeds - Suggest and implement solutions to enhance Ethernet speed - Ensure improved download speeds for smoother gaming experience

...electrician run ethernet cables from each floor to a central location where my modem will be located so I have a hardwired connection on each floor of the house. I would use those ethernet outlets to connect TVs that would stream content from the internet, and I'm also thinking of having a wireless access point on each floor to ensure strong wireless access throughout the house. I need help figuring out the exact equipment I should buy, and to confirm that my wiring plan will work as intended. I might also need help configuring the router and access points to make sure that I have one wireless network that my devices can easily use as I move throughout the house, switching to the strongest signal as I go. I think my electrician can do all the physical work, so I r...

I'm looking for a seasoned electronics engineer to develop a circuit board with a microcontroller with ethernet connectivity, POE power and addressable LEDs, with the design done using EasyEDA software to be fully manufactured by JLCPCB (or equivalent). The core functionality of this project focuses on power management. Your skills and expertise should include: - Comprehensive understanding of EasyEDA software (can take other suggestions) - Proven experience in multi-layer circuit board design - Extensive knowledge in PCB design for power management This project requires intricate knowledge of these areas, so please only bid if you're confident in your ability to deliver. Looking forward to working with experienced and dedicated specialists. Prov...

I've been struggling with getting the internet up and running on my physical RockyLinux server. I chose this OS for its stability and compatibility with CentOS, but I'm unable to activate the i...compatibility with CentOS, but I'm unable to activate the internet on it. I need help from a Linux expert who can guide me through this process. Key Tasks: - Troubleshoot and identify the root cause of the internet connectivity issue - Provide step-by-step guidance to activate Wired Ethernet connection Skills and Experience: - Extensive experience with Linux server administration, particularly with RockyLinux, CentOS or Debian. - Solid understanding of networking concepts, especially with regard to Wired Ethernet connections. - Proven track record of resolving conne...

I hope you are good. I have read your description carefully and understand everything. I’m Electronics engineer who have 25 year experience on analog design, renewable energy, power electronics, motor control, microcontroller coding and PCB design. I have used Arduino, PIC, MSP430, C2000 and STM32 for 8 years. I have developed several codes by using their IDE and compilers. I know all principles of them. And I can do microcontroller simulation by using Proteus. Proteus have microcontroller model and peripheral components to simulate the code. The code can be debugged by using COF file also. Simulation result is same with real time application.

I am looking for an experienced computer networking expert who can assist me in enhancing my understanding of network protocols, routing and switching, and network security. I am going to have an online at home test at 3pm EST(Eastern Standard Time) to 5pm on April 18th so I need just two hours of your time. The lecture notes and mater...5 (5.5.1, 5.5.2, 5.5.3, 5.5.4) - ICMP: The Internet control message protocol Section 5.6 >> The link layer and LANs: Chapter 6 - Introduction to link layer - Section 6.1 - Error detection and correction techniques Section 6.2. - Multiple access links and protocols Section 6.3. - Switched local area networks - Section 6.4 - Link Layer addressing and ARP 6.4.1 - Ethernet - section 6.4.2 - Link layer switches...

...backend modifications. You are the right fit for us if you: - have advanced knowledge of React and Node.js - feel comfortable with Python - have basic knowledge of graphic design (UX/UI) - are not afraid to test your developed app directly with hardware (beacons, sirens, etc.) - are solution-oriented (we don't believe in "that's impossible") - don't mind working on your own without constant supervision - keep your word and communicate openly Advantages: - experience with image processing, neural networks, and IoT concepts - knowledge of the Arduino IDE - basic understanding of communication protocols (USB, Ethernet, etc.) - project management skills - experience leading a development project - communicative English - you are ready to start right...

I hope you are good. I have read your description carefully and understand everything. I’m Electronics engineer who have 25 year experience on analog design, renewable energy, power electronics, motor control, microcontroller coding and PCB design. I have used Arduino, PIC, MSP430, C2000 and STM32 for 8 years. I have developed several codes by using their IDE and compilers. I know all principles of them. And I can do microcontroller simulation by using Proteus. Proteus have microcontroller model and peripheral components to simulate the code. The code can be debugged by using COF file also. Simulation result is same with real time application. I have 8 year experience on Arduino and know all principles of it. I’m using Atmega chip instead of Arduino board...

...interacting with these accurately • Data and Document checking • Data Entry • Keep CRM tidy and accurate • Prepare and sort out paperwork ahead of events and distribute within the organization And more… Position Requirements • Experience in an admin role • Spelling accuracy • A good eye for fine details • A perfectionist • Passionate about being organized • A well-performing desk-based PC environment • Ethernet (LAN) connected Internet connection with 8x8 VoIP Test results attached that can be done in internet explorer at • A quiet, professional environment in which to work • Reliability • Dedication to a long-term career It is in your nature to analyse things and look for improvements • Willingne...

I need to create a driver for a telescope, a dome and a focuser, all these accessories are currently controlled by a programmable automation system, the idea is to make a driver for each section, which connects via Ethernet/IP for example and is capable of sending the orders from the PC using ASCOM.

...integrating Siyi cameras with the Herelink V1.1 system to enable live streaming. However, I've encountered persistent connectivity issues when attempting to connect via Ethernet cable. Despite my best efforts, I haven't been able to establish a stable connection. I'm seeking an expert who possesses a deep understanding of networking protocols, camera systems, and drone technology. Your task will be to troubleshoot the connectivity issue and devise a solution that ensures seamless live streaming from the Siyi cameras to the Herelink V1.1 system. Key Requirements: Proficiency in networking configurations, particularly with Ethernet connections. Experience with Siyi cameras and familiarity with their compatibility with external devices. In-depth knowledge of...