Design and prototype a PCB with ESP32 + TFT + LiPo

Good afternoon, I am searching for a hardware designer able to design and prototype a board using altium designer v16 with the following specs: Serial SPI 2.8" TFT LCD Module Display 320x240 Optional Touch Screen (resistive / capacitive) LiPo batt 3.7VDC (different caps supported) ESP32-WROOM-32D The ESP32 must be able to measure the remaining battery accurately to show an indicator on screen ON/OFF button Flash switch micro usb for loading fw and also charging battery (FTDI or similar on board) touch IC (to use with resistive screen) (XPT2046) micro sc card slot All unused pins must be accessible from the outside via connector (JST style) The module must be able to charge the battery and work at the same time The screen must be connected in a way that the MCU can put it on "sleep mode" or turn it off. The project is based on: [login to view URL] And the result should be like the picture attached. The board must be able to work on external power supply (micro usb 5 volts) or LiPo batt. If both at the same time the lipo batt will be charged. The tft: [login to view URL] WIth 1 button: On/Off and a switch : Flash ESP32. The ESP32-WROOM-32D has to be also in charge of measuring the remaining battery using the ADC. If you think you can do it, start the bidding proposal with "ESP32TFT". If you need more info or pictures of the existing (but discontinued hardware), do not hesitate to contact me. Deliverables: 2 working prototypes All Altium project files including schematics, layouts, GERBER files, BOM and so on. (Altium -> Project -> Project Packager) Happy bidding.