Design a Global Shutter CMOS Camera Board

$1500-3000 AUD

Κλειστή

Αναρτήθηκε

περίπου 8 χρόνια πριν

$1500-3000 AUD

Πληρωμή κατά την παράδοση

We are looking for a capable electronics engineer who can design a CMOS Board Camera based on an Aptina AR0134, MT9M021/31 or similar sensor (1.3MPixel). The camera will operate in snapshot mode, taking an image on demand from an external trigger. (max 2 images per second) It should have a good quality board bayer interpolation, either using a dedicated Image Signal Processor OR an FPGA. It should output data via a Digital Data Bus as RGB or YUV (RGB preferred) The camera will be controlled via SPI, I2C or similar. Advanced camera features such as Auto Exposure, Auto White Balance, Auto Focus etc will not be required. For development and testing a board mount lens will be used. At a later stage the board will eventually be fitted behind a zoom lens module, but this does not form part of the current requirement. If you have previous experience with a similar project and can complete this design producing a camera prototype with a high quality image, then please reply indicating your former experience with CMOS image sensors and also indicate a "ball park" cost for your work. Also please suggest your preferred sensor device, and option for color interpolation. Firm Specifications will created and agreed by both parties before committing to firm price.

Digital Design

Electronics

FPGA

Ταυτότητα εργασίας: 10337687

Σχετικά με την εργασία

3 προτάσεις

Απομακρυσμένη Εργασία

Ενεργός/ή 8 χρόνια πριν

Ψάχνεις τρόπο για να κερδίσεις μερικά χρήματα;

Διεύθυνση Email

Πλεονεκτήματα πλειοδοσίας στο Freelancer

Καθόρισε τον προϋπολογισμό σου και το χρονοδιάγραμμα

Πληρώσου για τη δουλειά σου

Περίγραψε την πρόταση σου

Η εγγραφή και η πλειοδοσία σε εργασίες είναι δωρεάν

3 freelancers δίνουν μια μέση προσφορά $5.574 AUD για αυτή τη δουλειά

@panmc

We are the freelancing company specializing in development of basic and complex electronic circuits and firmware development. Have experience with multi-channel ultrasonic systems, smart sensors, surveillance systems, etc. Ready for discussion about the details.

$3.111 AUD σε 30 ημέρες

4,8

(1 αξιολόγηση)

3,2

@DaisyInovia

Dear Sir, We are a team of electronic and software engineers. We have experience in designing electronic product. We had designed before a CMOS camera for industrial use (manufacturing defect recognition). We are able to deign and build a prototype for you. We also able to provide the manufacturing service in our facility. Our working procedure is : 1- Sign an NDA and a design service agreement to your company. 2- payment of 30% deposit to start working on the design. 3- payment of 40% when design schematics are approved. 4- payment of 30% when prototypes are approved. for further information please do not hesitate to chat with me. Kind Regards.

$11.111 AUD σε 40 ημέρες