CAD File and BOM for a very simple circuit so we can get 10 boards run. -- 2

$30-250 USD

Ολοκληρώθηκε

Αναρτήθηκε

πάνω από 8 χρόνια πριν

$30-250 USD

Πληρωμή κατά την παράδοση

Currently we are using a hand wired board to hold 4 sockets and connect them to wires that are attached to an A/D board. We need someone to layout a simple board to hold four (4) 4x2 90° thru hole sockets and run traces to a on-board 10V regulated power supply and signal lines to a serial of holes that wires can be soldered into which connect to terminals on a commerical USB A/D board. It's really simple. Most of the work has already been done and is contained in the attached files. What we need is a CAD file and a BOM to send to an on-line fabricator to run 10 boards. The present system has a bunch of pull up resistors and caps for some digital I/O on the AD. These are not needed and should be removed from the schematic and the CAD. The sockets we want to use are ED58408-DN Conn IC Dip Socket 8 Pos Gold which can be sourced from Digikey (or whoever). We just want the CAD File and BOM to submit on line. A schematic and nearly completed version are attached to this submission. We'll plug the sensors into the sockets and bolt them to the PCB. The A/D board will be attached to the other side of the PCB (where there will probably be a ground plane). The sensors have signal level of 0 to 40 mV so we'd like to pick up as little noise as possible.

Electrical Engineering

PCB Layout

Ταυτότητα εργασίας: 8571692

Σχετικά με την εργασία

13 προτάσεις

Απομακρυσμένη Εργασία

Ενεργός/ή 9 χρόνια πριν

Ψάχνεις τρόπο για να κερδίσεις μερικά χρήματα;

Διεύθυνση Email

Πλεονεκτήματα πλειοδοσίας στο Freelancer

Καθόρισε τον προϋπολογισμό σου και το χρονοδιάγραμμα

Πληρώσου για τη δουλειά σου

Περίγραψε την πρόταση σου

Η εγγραφή και η πλειοδοσία σε εργασίες είναι δωρεάν

Βραβεύτηκε στον/στην:

@RegulViktor

I have to left 100 111111111111111111111111111111111111111111111111111111111111111111111111111111111111111

$40 USD σε 3 ημέρες

4,9

(204 αξιολογήσεις)

7,7

13 freelancers δίνουν μια μέση προσφορά $82 USD για αυτή τη δουλειά

@uetian09ee506

I am an Electrical Engineer having specialization in Electronics and Control, teaching in Electrical Department at FAST National University Pakistan. I am also continuing my MS degree in Electrical Engineering with specialization in CONTROL. I have taught the followings courses, and also supervised Projects related to these subjects. 1. Control System Design & Modelling (Matlab & Simulink) 2. Digital Logic Design (Verilog, VHDL, Logisim) 3. Digital System Design (Verilog, VHDL, Logisim) 4. Computer organization & Assembly Language (8086 processor, 8051 controller, Arduino, PIC) 5. Electric Machines Design and Analysis 6. Circuit Analysis and Designe etc 7. PCB Design (Proteous AREAS + Multisim Ultiboard) I assure you, if you assign your project to me, you surely gonna work with me in future.

$200 USD σε 3 ημέρες

4,8

(246 αξιολογήσεις)

7,2

@kingch91

Great Task, We have seen and understand all your requirements, We are Professional Engineers and PCB Designers for these type of works as we are working in the field since 10 years and handle all types of issues and make things according you need. Please open chat window to discuss all,

$100 USD σε 3 ημέρες

4,9

(179 αξιολογήσεις)

6,9

@bijan01in

Hi I am interested to this project. I am familiar with electronics, PIC microcontroller as well as PCB design by eagle. Thanks.

$30 USD σε 2 ημέρες

4,9

(89 αξιολογήσεις)

6,3

@dennuar

Hi! I am interested in your offer! I have experience in PCB layout (over 10 years) for power electronics with microprocessors PIC (microchip), AVR (ATMEL), STM32 (STeleсtronics) and others. I recently registered here, and willing to work for a small cost, because I need to improve the rating. Examples of my work you can see in the portfolio Waiting for your reply.

$35 USD σε 1 ημέρα

4,7

(35 αξιολογήσεις)

6,8

@maxbul

A proposal has not yet been provided

$90 USD σε 3 ημέρες

5,0

(49 αξιολογήσεις)

5,5

@Zaidi009

Hi, I am an Electrical Engineer and works as an Electronic designer , i have skimmed through your project necessities and capable of doing it. If you wish to see my past works , i can send you my pcb layouts. I have made SMPS design for cnc machine, UPS inverter card , and Digital Logic design projects Your task is really simple and easy for me to do. Please contact me for further details. Looking forward to work with you

$55 USD σε 1 ημέρα

4,0

(30 αξιολογήσεις)

5,0

@GrigAnna

Hi I'm a HW engineer and have about 7 year experience in schematic and PCB design. I will be glad to work with you.

$30 USD σε 3 ημέρες

3,9

(9 αξιολογήσεις)

4,6

@electronicproyec

Developer of electronic prototypes Hello, I am, I can do all the design and calculations of all the details to get your pcb according to your specifications, we will talk about the details.

$200 USD σε 5 ημέρες

5,0

(2 αξιολογήσεις)

1,9

@jkrieger

Don't miss your chance to get you project done at good quality and low price! I have experience in developing boards for different A\D converters, which are succesfullyrunning in the production. Can develop the board in Altium Designer or Orcad Allegro. Gerber files, drill and placement files + BOM will be delivered.

$44 USD σε 3 ημέρες

5,0

(2 αξιολογήσεις)

1,0

@abhikhotd

Currently working in PCB Layout with Altium Designer 2010 & Cadence 16.6, till now design of more than 100 boards completed.

$45 USD σε 3 ημέρες

0,0

(0 αξιολογήσεις)

0,0

@robertobizzarri

You did not attached any file. Anyway, which CAD do you want to be used? I use Altium Designer. ----------------------------

$166 USD σε 2 ημέρες

0,0

(0 αξιολογήσεις)

0,0

@hcwong88

Im hardware engineer using Altium designer for the micro controller projects. if the project is Altium based project and as simple as you mentioned i may finish it within 2 days.

$35 USD σε 2 ημέρες