Openwrt wifidogεργασίες

Hello, I would like to use a custom script in Ubiquiti Unifi access points (U6 and U6-LR) and to make sure it's not deleted when the AP is upgrading Therefore the job would be to have this script : 1- to be preserved when the firmware is upgrading 2- to be executed after the firmware upgrade (meaning the s...preserved when the firmware is upgrading 2- to be executed after the firmware upgrade (meaning the script should be executed once the AP reboots, through cronjob or any other method that would work). Bear in mind the method used to have the script to be executed should also survive the firmware upgrade If you know how to do it please apply for this project A good experience of Ubiquiti Unifi and/or OpenWRT OS would be needed I can give you SSH access to an AP for you to...

It is necessary to develop (or modify, see below) an interface in OpenWrt standard Luci (latest version 22.03) to configure the VPN IPSec iKEv1 / iKEv2 protocol (L2TP) with PSK or certificates (both must works apart). It must work with CISCO standard IPSec/L2TP in site-to-site mode and with internet redirection mode. You will need knowledge of the base OpenWrt, VPN protocol itself, ability to write linux shell scripts and understand JavaScript (for Luci GUI adaptation). There is a sample implementation of Open Source, but it only supports iKEv1 PSK, it can be modified to support needed modes. More details in private discussion. Please, start you proposal only if you detailed read project and write at start: I have read and fully understand your project!

We want development for wireless access point with below ports 1. RJ45 Console port. 2. 4G / 5G sim slot module. 3. GPS antenna. 4. 1 Gig WAN port 5. 1 Gig LAN port. 6. FTTH port 1 nos. 7. USB port. 8. Local power adapter socket. OFDMA and 4x4 MU-MIMO stack. 2GB RAM, 128 MB Flash, quad core. Stack to work on Openwrt based access point stack.

...wifi (second wifi-module) or, if there is no internet through wifi, a GSM module. So internet access will only go through the GSM module, when the WIFI module does not have a internet connection. Hardware: - Raspberry PI zero W - USB/ethernet Hat () - USB wifi - USB gsm module (Huawei 4g Dongle E3372) The hardware has been tested on the RPI with OpenWRT installed (). - The GSM module has it's own webpage (). From the local network this page must be accessible. - When plugin in an USB device, a network device will get a name like eth0, eth1, wlan0, wlan1. The USB module and the USB name is not automatically persistent. The configuration must be made so that a USB device will always

I need a OpenWrt Luci, Lua Developer

I'm looking someone experienced with openwisp & openwrt to help us connect device. Everything is already installed but we cant connect mikrotic router

We have a LoRaWAN gateway with OpenWRT on it. Messages from LoRaWAN are decrypted and sent to MQTT Broker via MQTT. MQTT format needs to be changed from default.

Need an specialist to do some projects on OpenWrt LuCI GUI (based mainly on Lua language ). For now there is requirement to create or modify / adopt exiting Quick-Setup page JS file for another device (video with functionality in attachment). In future there will be more projects with other requirements. Please, place bids with examples of your work (links on GitHub are welcome).

Situation : - Firmware has been lost Solution : - Recreate the firmware with all the files from a working router and make sure that it works as it used to be

Hello. I need help/support with my mikrotik hotspost login page using freeradius. Radius is fine (I also have a openwrt "page" which login is working fine...). For Mikrotik router I am using original firmware and it was working fine till couple of days ago, but my php coder did some change at the page, and something got broken. I restored old backup but, issue is not solved, maybe I did something wrong at mikrotik router when trying to fix first problem. I a getting the error "web browser did not send challenge response (try again, enable JavaScript)". I use chap login and when I activate pap for tests I get error radius is not responding.

OpenWRT + EspressoBin SBC + Sierra Wireless MC7455 + Ralink MT 7601 Hello, You will have to install and connect to the cell network for internet access and install wifi Ralink 7601 wifi dongle on OpenWRT,. SIM Card is provided and APN. Console and computer available.

...would like to configure a travel router () with OpenWRT to connect back to my OpenVPN server (pFSense) so I can access online services in Country A which is configured to detect my location. The project will be deemed a sucess if I can access the online services when I'm not in country A and when I check the public IP address in Country B it will show the IP address of Country A (in order to correctly detect geo location to access the services). OpenWRT is already installed on the travel router and OpenVPN server is already setup and verified by using iPhone over 4G network. The project scope is to configure OpenWRT to play nicely with OpenVPN server as I cannot configure the travel router to route traffic over the VPN connection

we need to modify the firmware of the GL-x300B collie router, so that if it is reset to factory, the configurations previously made in the firmware will not be modified, i.e. modify the factory SSID for one of our own and after physically resetting it, this will be maintained. The router supports openwrt

Thank you for reading this project. We are using PulseAudio on an Openwrt project and we are implementing echo cancel for a speakerphone application. We are having some difficulty getting the echo cancel to work (there is a distorted echo at the distant end), we believe this may be related to timing of the echo cancel stream with the microphone stream. I have an engineer on the job who needs some help and advice. Please let me know if there is someone who is an expert to help us resolve this issue. Thank you

We have an installation where we have a openwrt device acting as router, a local DNS server running on a computer of the intranet and a second openwrt device. Devices connected to the second openwrt device do not see the local DNS.

I have a WiFi router CF-EW72 V2 which is a relatively new model and has MT7621DAT+MT7613BEN+MT7603E. I am looking to get an OpenWRT-based firmware made for it, preferably from OpenWRT 21 stable branch. dts and other details will be provided before we get started on the work.

Παρακαλούμε Κάνε Εγγραφή ή Κάνε Είσοδο για να δεις λεπτομέρειες.

Hi, We have the WE826-T2-16 Mb and installed Openwrt openwrt-21.02.3-ramips-mt7620-zbtlink_zbt-we826-16m-squashfs-sysupgrade. Now we like to update this firmware, so we get a new firmware to do all explained below: 1. Make sure the UCI calls (see attachment) are default configuration in the new firmware 2. Get variables from a server explained in `Get variables` part 3. Make a script explained in the part `Discover DHCP` 4. Set Root password of router GET VARIABLES In the UCI calls we have some variables. Some are hardcoded. But a few we need to get with a simple post call like below, and store. If post call is not available we should retry a few times, and if still not available sent an other post call and only retry after restarting the modem. Post first time: ``` cu...

Hello, I need someone very familiar with the OpenWRT and web development to build a custom router and as well to have some modifications on the unit we are using now. Please bid only if you have high experiance as it is a complicate job and don't have much time. Thank you

We want to develop our own app and website for PMWANNI project. We want to connect all the devices to our cloud server by updated firmware. please tell me how can you help me. How you can complete the project ? Also we have to discuss price

is an linux base operating system on Linux for internet Routers. We want to update all our router to openwrt and want to connect all hotspot device to our cloud system. I can make authentication and accounting from my cloud server I can control all device from my cloud system.

Dont bid if no skill about openwrt developments and high budget from my post. I need openwrt package developer if possible develop similar wifidog or fix wifidog issue openwrt v22.x last version.

I already have the enviroment to generate openwrt images and some directories there for different router models with the customization that I need, for models such as tplink4300 and ZBT826 and unifi edgerouter. I need openwrt experienced developer to create the directory for Mikrotik Hap lite and customize it accordinly to the other models files/directories. I know its not much files but I dont know which ones.

Hello: We have OpenWRT >GoldenORB 19.3 installed in our router. This is an LTE setup router. The router logs indicate that device is sending location update request every 1-7 minutes. I am not sure where the source of this is, but we would like to close this. We have the logs from the carrier, if needed. Please advise if this is within your expertise to do? Thanks

Compile and install popular app on openwrt router while guiding me (holding my hand) through the process. I have programming background, (from looong time ago) but am not familiar with Linux. (A few weeks ago I didn't know what all of this means, and how to ask this queastion:) I figured out how to cross compile "helloworld" c example program for my router with provided toolchain. (I have development system set up:) I need a more complex program compiled and installed. I need support because I have a full time job which is completely unrelated and also I'm a single dad, so it's really difficult to switch and concentrate on the subject. Instead of wasting hours on solving dependencies (see, I'm getting the drift:) and looking up what an error message ...

I need this fast that's why I want someone with experience to add a package and obviously the package will work.

OpenWRT: Help me make a wireless client work Router: TP-Link AC1750 Archer (A7). Latest OpenWRT firmware installed. I installed OpenWRT on my TP-Link AC1750 Archer A7. I can't get wireless client to work, it does not connect to the internet. It also has Mullvad VPN setup. VPN was working fine with LAN only. But with wireless client, I cant access the internet.

We have our own router which has OpenWrt Interface. We also have bin file which the developer needs to modify according to our requirements

Teltonika rut240 OS white listing. This os is openwrt based Change the Logo, header,footer Regarding Document are available in Teltonika official Site

Hello, We have a Shadowsocks Server installed and its working with local windows client. We also has openwrt router that has Shadowsocks client installed. We want to pass through Shadowsocks Server traffic through below IP range - . If you have experience in openwrt pls let me know. I think without experience in openwrt its hard to do the job.

Necesito configurar routers con openwrt para que se puedan comunicar sedes.

I have 5 x wifi routers with each 4 x simcards, 4 x 4G PCIe modems built-in. There is a factory configuration on the router but I am having problems with the 4G connections. The modems keep connecting and disconnecting and it is not the signal because I have other LTE modems in the same office that I get good speeds up and download. I need a stable, high as possible speed connection and equal load balancing between the 4 modems.

Hello Alexksey, nice to see you here :) I bought from you a solution on upwork. I need some support to bring up openwrt on Comfast e320 with your solution. Thanks.

I want to hire a profisssional to cook a custom ROM for OpenWrt to use in a TP-Link router. the custom ROM contains : - Some new configration from the default ROM - Replace two files with my won files - Add SNMP software

simply this is requirments 1) client can genrate & edit vouchers/users and users with bandwidth quota and limits profiles #... # ability to control the entered voucher or user/pw ( banwidth speed + quota limit + uptime ) # abilitiy to edit voutcher codes template and extract it in pdf csv ..etc 2) client can add or ediit hotspot captive portal templates . # client choose from already exist splash templates + ability to add splash for client with our trademark 3) we will target openwrt & DDwrt AP devices using wifidog & Chillispot. # wifidog configure connection with script to automate easy config connection of new devices with the dashboard ( easy way to add new devices ) . ***** login and regesteration area for reselling and puplis...

We need an experienced cryptography programming practitioner with prior proven capabilities to oversee the design and implementation of a hybrid crypto stack operating under Linux at the server side and within routers and OpenWRT. Requires knowledge and skills working with the ARM SOC under DPDK to optimize packet throughput performance. Will not necessarily require programming, but more expertise on the crypto architecture and mentoring the team. Experience with all aspects of multi-stage hybrid crypto, key exchange, authentication and complex packet address proxying a plus, along with strong communications skills to work with teams in California and India.

We wish to have wifi access point firmware with full features i.e. security, performance, integrations, reporting, captive portals etc. We also wish to have a central cloud management for the firmware and the devices. The project may require an in going maintenance of the cloud setup, firmware support and patch releases.

Android app for access openwrt router , downloadable file you can get from . Please take a look for RPI4 version

This project consists in creating a customized page using LUA programming language to control a GPS device attached to a Raspberry Pi board. This new added page...added page will use JavaScript to trigger commands to start and stop the GPS logging service and to erase all logged files (.txt). JavaScript will interact with Lua to talk to OpenWRT system to control the service. I already have a working, customized, OpenWRT image and GPS. Using Material theme for LuCI as a starting point, this theme has been modified to fit our needs and we need this theme to be integrated to our customized image. This project is being built on a physical hardware, not sure if it's possible to emulate the same environment using VirtualBox or Qemu. We need a developer with some experience wit...

We need an experienced cryptography programming practitioner with prior proven capabilities to move portions of Java crypto code and other software onto a router using C or Go, under OpenWRT. Requires skills working with the ARM SOC under DPDK to optimize packet throughput performance. Experience with all aspects of multi-stage hybrid crypto, key exchange, authentication and complex packet address proxying a plus, along with strong communications skills to work with teams in California and India.

In this project, the openwrt has to be upgraded from 18.06 to 21.02, with the support of kernel 5.4.

We are creating a custom software package for OpenWRT and need to hire someone to help create a gui to make user experience more appealing

I am testing ppsk on hostapd and will need someone to build a custom hostapd package using this PR You do not have to know what ppsk is and even test it. I will help with that. Should be a quick job for someone who works on OpenWRT firmware.

There are two Open WRT routers as on the image: OpenWrt19.07.6-1 and OpenWrt19.07.6-2. Subnets are: , , wan interface: ping is working between subnets and , as well as I can reach the internet from both subnets. the issue: I can't ping from to , I can't ping from to I can't ping from to I can't ping from 5o as well as from 192. 168.2.0/24 to the internet (wan: ) Need someone to check the router's configuration.

i have few public IP on server and local is a openwrt router and its connected to server with a (openconnect) VPN tunnel. openwrt router IP: vpn server IP: now i can ping server to local and local to server. my server have few more ips are free now i want to use that IP on my local device like a device connected with openwrt router and i want to use a server Public ip on my local device. lets say set to a local device. my target is use server public IP on my local device. you need to route server IP to local over VPN tunnel so i can assign my server public ip to my local device that is connected with openwrt and openwrt connected to server over a VPN tunnel. i have same system running ON VIBE but vibe allowed only few models of router. also vibe hav...

I'm trying to sync files from a cifs mounted NAS on my Linux Mint system to my Nextcloud server. However, I'm getting the following errors:...problem writing to the storage on the server side." * From the client on the specific folder sync connection it says, "Unable to open or create the local sync database. Make sure you have write access in the sync folder." I have another folder sync connection which syncs the same data but is located on my hard drive and not an NAS. It doesn't run into any problems. The NAS is attached to an OpenWRT router and can be accessed via SSH. I'm not an expert but I'm guessing this might be a permissions issue? Whether it is or not, I'd like someone to diagnose the problem and see if there's a way to...

I need CoovaChilli() package built with specific flags. This will be built for MikroTik750gr3 (MediaTek MT7621AT ). Should be a quick job for someone who works in this space.

i have a openwrt installed router like tplink 3420 v5 now fastd install installed server & router both side. my server in USA and my router is france server have 8IPS like - but server useing only 1IP rest of 7IPS free like 23.23.23.3- now my france router have connected my linux PC so i want to issue a static IP to my linux server. and my linux server have to be get this IP from server. now any one from the world get access on this IP: cause its an public IP . when my linux pc get public IP then i can run any service as i want like SIP=5060 web=80,443 mysql=3306 etc like that. i dont want any port FWD service. i want my local linux pc have to get full real IP from my server. so when my linux pc offline i can see ping

I need to configure open vpn (that I have already )Config file with my router and need to Config firewall and put directory via ssh root and run the OpenVPN client in router

I need to configure open vpn in openwrt router any one technical skills let me know