Λογότυπο FreelancerΠως ΛειτουργείΑναζήτησε Εργασίες
Είσοδος Εγγραφή
Ανάρτηση Εργασίας
Εικόνα εξωφύλλου προφίλ
Τώρα ακολουθείς τον/την
Σφάλμα στην ακολουθία χρήστη.
Αυτός ο χρήστης δεν επιτρέπει σε χρήστες να τον ακολουθούν.
Έχεις ήδη ακολουθήσει αυτό τον χρήστη.
Το πλάνο συνδρομή σου επιτρέπει μόνο 0 ακόλουθους. Κάνε αναβάθμιση εδώ.
Δεν ακολουθείς τον/την
Σφάλμα κατάργησης ακόλουθου χρήστη.
Έχεις προτείνει επιτυχώς τον/την
Σφάλμα πρότασης χρήστη.
Κάτι πήγε στραβά. Παρακαλούμε ανανέωσε τη σελίδα και δοκίμασε ξανά.
Επιτυχώς επαληθευμένο Email.
Avatar Χρήστη
$10 USD / ώρα
Σημαία της KENYA
nairobi, kenya
$10 USD / ώρα
Τώρα είναι 5:27 π.μ. εδώ
Έγινε μέλος Αυγούστου 17, 2018
0 Recommendations

Morris K.

@automorris

 0,0 (0 αξιολογήσεις)
0,0
0,0
0%
0%
$10 USD / ώρα
Σημαία της KENYA
nairobi, kenya
$10 USD / ώρα
Μ/Δ
Ολοκληρωμένες Δουλειές
Μ/Δ
Εντός Προϋπολογισμού
Μ/Δ
Εντός Χρόνου
Μ/Δ
Βαθμός Επανάληψης Πρόσληψης

Mechatronics Design Engineer

Am a Solidworks designer and Solidcam CNC programmer. My scope of work is on CAD design, FEA analysis and CNC programming. 3 years of experience in designing customers products. My main aim is to offer the best design solutions to various engineering problems. Looking forward to work on challenging design problems.
Freelancer Engineers Kenya
Προβολή όλων Engineers σε Kenya

Επικοινώνησε με τον/την Morris K. για τη δουλειά σου

Συνδέσου για να συζητήσεις τις λεπτομέρειες μέσω τις συνομιλίας.

Πορτφόλιο

9389303
This is a former clients project. Entailed designing a green house plus adding ventilation system. The ventilation entails a lower induction system to the green house and a top exhausting system. This was a four day intensive work but at the end was a successful project.
Green House + Forced Ventilation System
This is a former clients project. Entailed designing a green house plus adding ventilation system. The ventilation entails a lower induction system to the green house and a top exhausting system. This was a four day intensive work but at the end was a successful project.
Green House + Forced Ventilation System
This is a former clients project. Entailed designing a green house plus adding ventilation system. The ventilation entails a lower induction system to the green house and a top exhausting system. This was a four day intensive work but at the end was a successful project.
Green House + Forced Ventilation System
9389155
This was a clients project for his camping activities using his chevrolet colorado 2016 model. The camping kitchen consists of the main components to ensure the camping is a success. A cutlery cabinet, utensils cabinet, sink drawer, a gas cooker drawer, a cooler cabinet and a camping tent cabiinet. This was project inspired me to design and fabricate a similar camping kitchen some day. Did the renderings too. A very satisfying project at the end.
Overland Camping Kitchen
This was a clients project for his camping activities using his chevrolet colorado 2016 model. The camping kitchen consists of the main components to ensure the camping is a success. A cutlery cabinet, utensils cabinet, sink drawer, a gas cooker drawer, a cooler cabinet and a camping tent cabiinet. This was project inspired me to design and fabricate a similar camping kitchen some day. Did the renderings too. A very satisfying project at the end.
Overland Camping Kitchen
This was a clients project for his camping activities using his chevrolet colorado 2016 model. The camping kitchen consists of the main components to ensure the camping is a success. A cutlery cabinet, utensils cabinet, sink drawer, a gas cooker drawer, a cooler cabinet and a camping tent cabiinet. This was project inspired me to design and fabricate a similar camping kitchen some day. Did the renderings too. A very satisfying project at the end.
Overland Camping Kitchen
9157556
This is a rally roll cage based on the main hoop. The cage is designed using chromoly tubing measuring 1.75 inches in diameter having a thickness of 6.35mm. The cage lacks the gussets on the driver and co driver door bars and the main hoop cross bars. The individual tubes are individual parts that requires to some cad drawing generation for cnc cutting, notching and bending. Its a full rollcage kit model not based on a specific car. Looking forward to working on more roll cages.
FIA Rally RollCage Deisgn
This is a rally roll cage based on the main hoop. The cage is designed using chromoly tubing measuring 1.75 inches in diameter having a thickness of 6.35mm. The cage lacks the gussets on the driver and co driver door bars and the main hoop cross bars. The individual tubes are individual parts that requires to some cad drawing generation for cnc cutting, notching and bending. Its a full rollcage kit model not based on a specific car. Looking forward to working on more roll cages.
FIA Rally RollCage Deisgn
This is a rally roll cage based on the main hoop. The cage is designed using chromoly tubing measuring 1.75 inches in diameter having a thickness of 6.35mm. The cage lacks the gussets on the driver and co driver door bars and the main hoop cross bars. The individual tubes are individual parts that requires to some cad drawing generation for cnc cutting, notching and bending. Its a full rollcage kit model not based on a specific car. Looking forward to working on more roll cages.
FIA Rally RollCage Deisgn
9057919
This is a custom transmission plate made from a 500mm by 500mm by 40mm 6061 aluminium. The CNC programmig is achieved using solidcam 2D i-machining. This project was very fun and awesome working on.
Transmission Adapter Plate Design and CNC programming
This is a custom transmission plate made from a 500mm by 500mm by 40mm 6061 aluminium. The CNC programmig is achieved using solidcam 2D i-machining. This project was very fun and awesome working on.
Transmission Adapter Plate Design and CNC programming
This is a custom transmission plate made from a 500mm by 500mm by 40mm 6061 aluminium. The CNC programmig is achieved using solidcam 2D i-machining. This project was very fun and awesome working on.
Transmission Adapter Plate Design and CNC programming
This is a custom transmission plate made from a 500mm by 500mm by 40mm 6061 aluminium. The CNC programmig is achieved using solidcam 2D i-machining. This project was very fun and awesome working on.
Transmission Adapter Plate Design and CNC programming
This is a custom transmission plate made from a 500mm by 500mm by 40mm 6061 aluminium. The CNC programmig is achieved using solidcam 2D i-machining. This project was very fun and awesome working on.
Transmission Adapter Plate Design and CNC programming
8791006
The lower control arms were modelled based on an offroad buggy. The Arms needed to be made from sheetmetal. Provide enough travel height through the dunes and handle the stress induced on it. The design caters for front left and right lower control arms. The arms measures 24 inches in length and a track width of 16 inches(bolting points to the chassis)
Lower Control arm Design
The lower control arms were modelled based on an offroad buggy. The Arms needed to be made from sheetmetal. Provide enough travel height through the dunes and handle the stress induced on it. The design caters for front left and right lower control arms. The arms measures 24 inches in length and a track width of 16 inches(bolting points to the chassis)
Lower Control arm Design
The lower control arms were modelled based on an offroad buggy. The Arms needed to be made from sheetmetal. Provide enough travel height through the dunes and handle the stress induced on it. The design caters for front left and right lower control arms. The arms measures 24 inches in length and a track width of 16 inches(bolting points to the chassis)
Lower Control arm Design
9041090
This is a five cylinder intake manifold having five runners. The design idea is such that the runners, the plenum are separate entities thus easier to machine. The plenum has two sections, the upper and the lower. The runners have incorporated fuel injector ports for a better design. The intake manifold is suitable to any throttle body the client has. Depending on the throttle body,an additional spacer plate can be machined to couple the intake manifold and the throttle body
Intake Manifold
9389303
This is a former clients project. Entailed designing a green house plus adding ventilation system. The ventilation entails a lower induction system to the green house and a top exhausting system. This was a four day intensive work but at the end was a successful project.
Green House + Forced Ventilation System
This is a former clients project. Entailed designing a green house plus adding ventilation system. The ventilation entails a lower induction system to the green house and a top exhausting system. This was a four day intensive work but at the end was a successful project.
Green House + Forced Ventilation System
This is a former clients project. Entailed designing a green house plus adding ventilation system. The ventilation entails a lower induction system to the green house and a top exhausting system. This was a four day intensive work but at the end was a successful project.
Green House + Forced Ventilation System
9389155
This was a clients project for his camping activities using his chevrolet colorado 2016 model. The camping kitchen consists of the main components to ensure the camping is a success. A cutlery cabinet, utensils cabinet, sink drawer, a gas cooker drawer, a cooler cabinet and a camping tent cabiinet. This was project inspired me to design and fabricate a similar camping kitchen some day. Did the renderings too. A very satisfying project at the end.
Overland Camping Kitchen
This was a clients project for his camping activities using his chevrolet colorado 2016 model. The camping kitchen consists of the main components to ensure the camping is a success. A cutlery cabinet, utensils cabinet, sink drawer, a gas cooker drawer, a cooler cabinet and a camping tent cabiinet. This was project inspired me to design and fabricate a similar camping kitchen some day. Did the renderings too. A very satisfying project at the end.
Overland Camping Kitchen
This was a clients project for his camping activities using his chevrolet colorado 2016 model. The camping kitchen consists of the main components to ensure the camping is a success. A cutlery cabinet, utensils cabinet, sink drawer, a gas cooker drawer, a cooler cabinet and a camping tent cabiinet. This was project inspired me to design and fabricate a similar camping kitchen some day. Did the renderings too. A very satisfying project at the end.
Overland Camping Kitchen
9157556
This is a rally roll cage based on the main hoop. The cage is designed using chromoly tubing measuring 1.75 inches in diameter having a thickness of 6.35mm. The cage lacks the gussets on the driver and co driver door bars and the main hoop cross bars. The individual tubes are individual parts that requires to some cad drawing generation for cnc cutting, notching and bending. Its a full rollcage kit model not based on a specific car. Looking forward to working on more roll cages.
FIA Rally RollCage Deisgn
This is a rally roll cage based on the main hoop. The cage is designed using chromoly tubing measuring 1.75 inches in diameter having a thickness of 6.35mm. The cage lacks the gussets on the driver and co driver door bars and the main hoop cross bars. The individual tubes are individual parts that requires to some cad drawing generation for cnc cutting, notching and bending. Its a full rollcage kit model not based on a specific car. Looking forward to working on more roll cages.
FIA Rally RollCage Deisgn
This is a rally roll cage based on the main hoop. The cage is designed using chromoly tubing measuring 1.75 inches in diameter having a thickness of 6.35mm. The cage lacks the gussets on the driver and co driver door bars and the main hoop cross bars. The individual tubes are individual parts that requires to some cad drawing generation for cnc cutting, notching and bending. Its a full rollcage kit model not based on a specific car. Looking forward to working on more roll cages.
FIA Rally RollCage Deisgn
9057919
This is a custom transmission plate made from a 500mm by 500mm by 40mm 6061 aluminium. The CNC programmig is achieved using solidcam 2D i-machining. This project was very fun and awesome working on.
Transmission Adapter Plate Design and CNC programming
This is a custom transmission plate made from a 500mm by 500mm by 40mm 6061 aluminium. The CNC programmig is achieved using solidcam 2D i-machining. This project was very fun and awesome working on.
Transmission Adapter Plate Design and CNC programming
This is a custom transmission plate made from a 500mm by 500mm by 40mm 6061 aluminium. The CNC programmig is achieved using solidcam 2D i-machining. This project was very fun and awesome working on.
Transmission Adapter Plate Design and CNC programming
This is a custom transmission plate made from a 500mm by 500mm by 40mm 6061 aluminium. The CNC programmig is achieved using solidcam 2D i-machining. This project was very fun and awesome working on.
Transmission Adapter Plate Design and CNC programming
This is a custom transmission plate made from a 500mm by 500mm by 40mm 6061 aluminium. The CNC programmig is achieved using solidcam 2D i-machining. This project was very fun and awesome working on.
Transmission Adapter Plate Design and CNC programming
8791006
The lower control arms were modelled based on an offroad buggy. The Arms needed to be made from sheetmetal. Provide enough travel height through the dunes and handle the stress induced on it. The design caters for front left and right lower control arms. The arms measures 24 inches in length and a track width of 16 inches(bolting points to the chassis)
Lower Control arm Design
The lower control arms were modelled based on an offroad buggy. The Arms needed to be made from sheetmetal. Provide enough travel height through the dunes and handle the stress induced on it. The design caters for front left and right lower control arms. The arms measures 24 inches in length and a track width of 16 inches(bolting points to the chassis)
Lower Control arm Design
The lower control arms were modelled based on an offroad buggy. The Arms needed to be made from sheetmetal. Provide enough travel height through the dunes and handle the stress induced on it. The design caters for front left and right lower control arms. The arms measures 24 inches in length and a track width of 16 inches(bolting points to the chassis)
Lower Control arm Design
9041090
This is a five cylinder intake manifold having five runners. The design idea is such that the runners, the plenum are separate entities thus easier to machine. The plenum has two sections, the upper and the lower. The runners have incorporated fuel injector ports for a better design. The intake manifold is suitable to any throttle body the client has. Depending on the throttle body,an additional spacer plate can be machined to couple the intake manifold and the throttle body
Intake Manifold

Αξιολογήσεις

Οι αλλαγές αποθηκεύτηκαν
Δεν υπάρχουν αξιολογήσεις για να δεις εδώ!

Εμπειρία

CAD Designer & CNC Machinist

Kens Metal
Φεβ 2022 - Σεπ 2022 (7 μήνες, 3 ημέρες)
My role here included designing customer's designs, nesting the drawings for laser cutting and cnc water jet cutting. I also did the actual cutting on either the fiber laser cnc machine or water jet cnc machine

Εκπαίδευση

Bachelors Degree Mechatronics Engineering

Jomo Kenyatta University of Agriculture and Technology, Kenya 2016 - 2021
(5 χρόνια)

Προσόντα

Bachelors Degree in Mechatronics Engineering

Jomo Kenyatta University of Science and Technology
2016
Graduated with a second class lower division. I worked on several projects while at school which helped me build up my skills in CAD design.

Επικοινώνησε με τον/την Morris K. για τη δουλειά σου

Συνδέσου για να συζητήσεις τις λεπτομέρειες μέσω τις συνομιλίας.

Επαληθεύσεις

Προτιμώμενος Freelancer
Η Ταυτότητα Επαληθεύτηκε
Επαληθευμένη Πληρωμή
Το Τηλέφωνο Επαληθεύτηκε
Το Email Επαληθεύτηκε
Το Facebook Συνδέθηκε

Κορυφαίες Ικανότητες

Engineering
CAD/CAM
Manufacturing
3D Rendering
Solidworks

Αναζήτησε Παρόμοιους Freelancers

Engineers in Kenya
Engineers
CAD/CAM Designers
Manufacturing Experts

Αναζήτησε Παρόμοιες Προβολές

Engineering
CAD/CAM
Manufacturing
3D Rendering
Προηγούμενος Χρήστης Νέος Χρήστης
Η πρόσκληση έχει σταλεί επιτυχώς!
Ευχαριστούμε! Σου έχουμε στείλει ένα email με ένα σύνδεσμο για να διεκδικήσεις τη δωρεάν πίστωση σου.
Κάτι πήγε στραβά κατά την προσπάθεια αποστολής του email σου. Παρακαλούμε δοκίμασε ξανά.
Λογότυπο Freelancer Greece / ελληνικά Βοήθεια & Υποστήριξη FreelancerΚατηγορίεςΕργασίεςΔιαγωνισμοί FreelancersEnterpriseΣυνδρομήΠρόγραμμα Προτιμώμενου FreelancerΔιαχείριση ΕργασιώνΤοπικές Δουλειές Photo AnywhereΈκθεσηAPI για DevelopersΛάβε ΕπαλήθευσηDesktop Εφαρμογή Σχετικά Σχετικά με εμάςΠως ΛειτουργείΑσφάλειαΕπενδυτήςΧάρτης ΣελίδαςΙστορίεςΝέαΌμαδαΒραβείαΑνακοινώσεις ΤύπουΚαριέρες Όροι Πολιτική Προστασίας Προσωπικών ΔεδομένωνΌροι και ΠροϋποθέσειςΠολιτική Πνευματικών Δικαιωμάτων Κώδικας ΕπικοινωνίαςΧρεώσεις και ΠρομήθειεςΣυνεργάτεςEscrow.comLoadshiftWarrior Forum Εφαρμογές λογότυπο Apple App StoreΛογότυπο Google Play
Η αντιγραφή στο πληκτρολόγιο απέτυχε, παρακαλούμε δοκίμασε ξανά αφού τροποποιήσεις τις άδειες σου.
Αντιγράφηκε στο πληκτρολόγιο.
Εγγεγραμμένοι Χρήστες Συνολικές Αναρτημένες Δουλειές
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Φόρτωση προεπισκόπησης
Δόθηκε πρόσβαση για Geolocation.
Η σύνδεση σου έχει λήξει και τώρα έχεις αποσυνδεθεί. Παρακαλούμε συνδέσου ξανά.