Help with building application

Make ELEVATION The façade drawings shall show the facades that are affected and are indicated by the respective weather lines. The drawings must indicate both existing and sought-after appearances for extensions. The drawings should be linearly drawn in black / white, dimensioned and be in scale 1: 100. All drawings should be on white, uncut paper in A4 or A3 format. Make The floor plan The floor plan of the building - which must be attached to the building permit application - must show a furnished room layout as seen from above incl. descriptions of what the rooms are used for eg bedrooms, kitchens, etc. and room sizes in m2. Kitchen fixtures and fixtures in hygiene rooms and laundry facilities must also be reported. The location of the doors and windows must be clearly stated as well as stairs and other level differences. If it is a refurbishment or refurbishment, the existing building's room must also be reported. The drawing should clearly state what is existing and what is new. New walls can with advantage be accounted for by scraping or in different gray tones. The outer dimensions of extensions must be stated. The floor plan must have a professional design. Make Section Intersection through the housing showing the construction, the foundation method, room heights, the floor layering and the roof construction. The section must be dimensioned so that the room heights and the building height are shown. At the floor plan one shows with a dashed line through the house where the section is taken.