Find Jobs
Hire Freelancers

General purpose regester

$30-250 USD

Κλειστή
Αναρτήθηκε πάνω από 4 χρόνια πριν

$30-250 USD

Πληρωμή κατά την παράδοση
complete the design of a simple general purpose processor using Xilinx ISE Schematic Capture.
Ταυτότητα εργασίας: 22377101

Σχετικά με την εργασία

4 προτάσεις
Απομακρυσμένη Εργασία
Ενεργός/ή 4 χρόνια πριν

Ψάχνεις τρόπο για να κερδίσεις μερικά χρήματα;

Πλεονεκτήματα πλειοδοσίας στο Freelancer

Καθόρισε τον προϋπολογισμό σου και το χρονοδιάγραμμα
Πληρώσου για τη δουλειά σου
Περίγραψε την πρόταση σου
Η εγγραφή και η πλειοδοσία σε εργασίες είναι δωρεάν
4 freelancers δίνουν μια μέση προσφορά $168 USD για αυτή τη δουλειά
Avatar Χρήστη
Dear customer, I am really happy to help you out of this project. I would like to introduce that I am an freelancer with 100% JOB COMPLETED in VHDL/VERILOG and about 200 JOB completed. I am really suitable for job description: First: I am an Electronics engineer who is very expertise with VHDL/Verilog. In fact, I have done with very high difficult project in backend design in FPGA by correct timinig closure for FPGA with 400 Mhz in Virtex Ultrascale+ in some field like mining coin (bitcore, and lyra2rev3) Also, I am very good in English (IELTS 6.0) and I have several year of researching so I can fully understand your requirement and understand fully about the papers and write the academic report. Please contact me and let me know if you want any special requirement and do with lower price. Thank you.
$250 USD σε 3 ημέρες
4,9 (89 αξιολογήσεις)
6,4
6,4
Avatar Χρήστη
Hi I have been working on Verilog-VHDL and Xilinx and Altera FPGAs by more than 6 years. I have designed a similar processor already. Lets work together. Thanks
$250 USD σε 5 ημέρες
5,0 (30 αξιολογήσεις)
5,5
5,5
Avatar Χρήστη
As an electronic architect, I have been working in PCB structure/design and firmware programming field for 8+ years. Here is a portion of the encounters that I worked back. - Schematic and PCB Format is utilizing Altium Planner, Rhythm, Falcon, etc. ISE/XPS/SDK/Vivado, Altera Quartus, IceCube) - ARM, DSP, MCUs, Arduino experience. - Arm centers: ATSAM, STM32, PIC32, A13, Freescale, MSP, NXP - MPU: Pic16F, Pic18F, Pic33F, Atmega8,16,128,32,8051,8951,8052,80251 - Single board PC: Raspberry Pi, Beaglebone, NanoPi - Strong with UART, I2C, SPI, BLE, BT, GSM/GPRS/GPS, xBee, ZigBee. - Especially full understanding for BLE HM10, HC05, ESP32, DA14580, nRF52832, 52840, BlueNRG, - C/C++ Coding IDE: keil uvision, Eclipse IDE, Arduino IDE, Avr Studio. - Microprocessor / Microcontrollers: 8051, 8086, ATMEGA, AVR, ATSAM3X8E,STM32,PIC Open Source Micro controllers Platforms: Arduino Uno, Arduino Nano, Arduino Due, STM32 Nucleo board. Experience in managing all phases of electronic product manufacturing and assembly Experience in board-level Testing, Debugging, Test Reports, Test Plans. I am ready to give hardworking, reliability, flexibility & honesty. I can work with minimal supervision, communicate & give updates on the status of my work output. When you employ me, anticipated that I should enable your business to like I 'm developing it as my own. I couldn't imagine anything better than to get notification from you
$30 USD σε 2 ημέρες
4,8 (17 αξιολογήσεις)
4,7
4,7
Avatar Χρήστη
I have read your project and I am an expert in this field. I can do this for you within due time and honestly. I also have a few questions to discuss. Kindly contact me and we will discuss time and budget. Thanks
$140 USD σε 7 ημέρες
5,0 (3 αξιολογήσεις)
2,2
2,2

Σχετικά με τον πελάτη

Σημαία της UNITED STATES
Hyattsville, United States
5,0
11
Μέλος από Οκτ 24, 2019

Επαλήθευση Πελάτη

Ευχαριστούμε! Σου έχουμε στείλει ένα email με ένα σύνδεσμο για να διεκδικήσεις τη δωρεάν πίστωση σου.
Κάτι πήγε στραβά κατά την προσπάθεια αποστολής του email σου. Παρακαλούμε δοκίμασε ξανά.
Εγγεγραμμένοι Χρήστες Συνολικές Αναρτημένες Δουλειές
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Φόρτωση προεπισκόπησης
Δόθηκε πρόσβαση για Geolocation.
Η σύνδεση σου έχει λήξει και τώρα έχεις αποσυνδεθεί. Παρακαλούμε συνδέσου ξανά.