No Hardware work required. Build me a MPLABX project based on PIC32 (May Be chipKit Max32 ) with a Wiznet W5500 TCP/IP hardware engine that takes in Data from UART via RS485 MODUBUS @ 9600bps. I need the entire MODBUS memory mapped from address range 40000 onward (The holding registers) and accessible to populate via pointers using other functions from the main program. So the MODBUS Library must be able to handle the same. So this is a PoC which I will use as building blocks. So you deliver the following:
1. Schematic (To be rigged Up using a PIC32MX795F512L and a W5500 Ethernet)
2. A Sample Project with well documented Libraries in MPLABX format ready to be compiled using XC32 C Compiler
3. Do not use Harmony to Rig up the project. It already wasted a lot of my time.
4. Functionality required MODBUS over RS485 to MODBUS over TCP/IP conversion.
5. A little help file on how to use and expand the system
I need this in a about 5 days. I will only pay if all of the above are met in my real hardware test. If you have a hardware setup at your end you will be preferred over others.
Thanks for your time.
8 freelancers are bidding on average ₹159027 for this job
Hello I am electrical engineering expert. I can complete yr project in 3 days. Relevant Skills and Experience Arduino, C Programming, C++ Programming, Electronics, Microcontroller Proposed Milestones ₹27777 INR - all
I was working on PIC32, Modbus over RS485 and wiznet before. but i'm not implementing Modbus over TCP/IP, and i don't think it will be a big deal. Stay tuned, I'm still working on this proposal.