FIRMWARE DEVELOPMENT BASED ONLY ON ATMEL Studio 7 or Rtos

HI I am experienced embedded system developer with more than 8 years of experience. I have completed a number of projects here. I can do it for you. Please share the flow chart of algorithm you want to get it done. I am waiting for your reply to start Regards

Hi, I write in English because the project post was in English, but of course I could write in Italian as well. I have much experience in microchip development, mainly 32 bit Processors of the PIC32 MX and PIC32MZ family, using Harmony, the WINC1500 WiFi Module and Free RTOS. I have not developed yet using the SAM family of micro controllers, and ATMEL Studio, but I am interested in making some project on them. I already have at home the following hardware: SAMD21 Xplained Pro + WINC1500 Xplained Pro Extension board + I/O1 Xplained Pro Extension board I also have the Atmel-ICE Debugger / Programmer, so I could do some preliminary work even without having your custom board here, but of course it would be better if you send me your custom board for developing and testing. In case you cannot send your board, I could also try and build a sort of prototype with the devices you mentioned. Of course there are many more details we could talk about if you contact me. I could also do some preliminary work before you award the project to me, so you would see how I work and then decide.

Hello! I am an embedded software engineer who has rich experience in firmware developing and custom embedded programming and Atmel studio 7. You are going to use some components like • ATSAMD21G18 • n.2 eeprom at24c256 • Buethooth HC05 • INPUT 4 channel 4-20mA to I2c ( adc1115 ) • Input 1 channel PT100 ( max31865 ) Digital sensor DALLAS DS18B20 ( setting the bit 9 to 12 ) and use as a sensor • 1 output 4-20Ma • 1 formula in Loop I am very familiar with these components and can write the firmware that controls and handles these components so I can help you with this project perfectly. I have developed similar projects that is the Fingerprint recognition system. This system use ARM cortex series AT91SAM9260 and this custom firmware drive LCD CMOS fingerprint sensor EEPROM RAM USB, UART interface NFC CARD reader interface. I really want to discuss this project in more detail via chat or call. Thank you Alexander

Hi sir, WE have checked your project and we are able to give you good solution on it. Please discuss with us on your project. We are professional engineers and developers who do such projects from the last eight years. We offer you our skills for this project at very low rates comparatively without compromising the quality of work. Let me introduce you to our company TURKTRONICS. We are TURKTRONICS. We are professionals with 8+ years of experience in Circuit designs, PCB designs, embedded system solutions, mobile app development, programming and software development. We provide complete end to end solutions for all kind of development projects. IOT is our strong point. In this bid, prototyping and shipping cost is not included however paying extra slight of money to include prototypes. We have the manufacturing facility and we produce the very high standard PCB boards and send ready products to customers doorsteps via DHL. We care about our clients and help them to get out of any potential problem throughout the projects and also give post completion technical support if ever required. We are very much looking forward to hear from you on this in coming days! Cheers!!! Ahmad Lead Technical Engineer TURKTRONICS An Internet of Things Company !

Hi, I hope you are doing well. I have expertise in embedded system design and development. I have worked on Atmel controller a lot using Atmel Studio and I have most of the hardware available for quick prototyping and testing, I have understood your requirements and would like to discuss it further. Looking Forward, Khawaja

hi there i am an electrical engineer. i have 5+ years of experience related to atmel studio. i can do this project for you with all the requirements for you. let me know if you are interested.

Hello I have got your job posting “FIRMWARE DEVELOPMENT BASED ONLY ON ATMEL Studio 7 or Rtos” and I am very much interested to work in your project. I am a circuit designer and have more than 5 years experience of working with the Analog/Digital Electronics Embedded systems(Arduino,Rasberry pi ,ARM processors ,Atmel/PIC microcontrollers,Wireless boards,TFT Touch Displays,All types of sensors and actuators). i have done tons of similar projects So, I think you’ll find that, I have the skills you’re looking for. For more on my skills and successfully finished projects, please have a look on my Profile and Portfolio. I have all the components available here with me so i will develop a working prototype according to your specifications and then send you the code and schematics so things will work for sure.I will remotely guide you and help you build the system on your side. I am always available on Email and Skype. Please have a voice or video chat if necessary. I shall be available round the clock and able to start your project as soon as possible according to you. Thank you for your consideration, Best Regards, Haseeb Shafqat

Awesome! I am a senior developer expertised in ATMEL. I have read your description carefully and am very interesting in your project. I will help you with my wonderful expertise and i have good attitude to complete your project with good communication. I 'm sure about your project. Right now i can start and will do myself for you. thanks.

Hi there, I have checked the details. I have rich experience with Arduino, C Programming, Electrical Engineering, Electronics, Microcontroller. Please initiate the chat so we can discuss this job in detail.

Hi My name is Vusi and I'm an Electronic Engineer, you can learn more about me from my Freelancer profile.

i am professional embedded developer, i am interested to do your project. i will deliver your project as soon as possible with 100 % satisfaction. it will be my pleasure to work with you.

I am an expert ARM and Arduino MCU developer. I have experience of working on different types of IDE's and architectures. I am confident that I am the right person for this job. Why Hire me? - I am known for clean and commented code. - I have worked on multiple architectures and its easy for me to pick on any new one. - I have professional experience of embedded systems - Realistic Timelines and project expectations. - Expert at hardware design What you will get? - Complete Firmware/Exe/Source files in ATMEL Studio project - A simple CTOS/custom app for viewing HC-05 data - Schematics - Ref Manual My Skills: - Microcontrollers: ATMEL, Microchip (PIC16/18/24), ARM Cortex M Series (TI, STM32, SiLabs Gecko Series). - IDEs: IAR EW, Keil, Eclipse, Arduino, MPLAB, MPLABX. - Prog Languages: C, C++, Java, Python, HTML/CSS3, Js, Jq, Jq Mobile. - Hardware Design: EaglePCB, Altium, Proteus. - RTOS: CMX-RTOS, MicriumOs, TI-RTOS. Please feel free to visit my previous reviews to see proof of my abilities. Please finalize all the tiny bits of projects before offering it. I don't take any project if I am not confident of completing. I respect the time and investment of my clients. *It should be noted that employer has to provide expenses of hardware. The cost of hardware is not included in a milestone. **I have few points regarding the project that need further clarification. Thanks

Hi I'm interested in the description whatever you have shared. I'm having a rich experience on atmel studio with atmel start features. Kindly discuss with me in chat.