Find Jobs
Hire Freelancers

Do some 3D Modelling -- 3

£20-250 GBP

Ολοκληρώθηκε
Αναρτήθηκε περίπου 6 χρόνια πριν

£20-250 GBP

Πληρωμή κατά την παράδοση
Title: Design of a Domestic Soap Scrap Reuse Device Brief : Design a hand powered device to combine and compact used soap scraps into a large single bar. The device is to be designed to reuse old scraps of soap, combine and squeeze them into new bars. It is thought that some sort of mechanical advantage will be required during the compacting or squeezing operation. So that very hard old scraps of soaps can be compressed , it is required that water is to added somehow during the combining / squeezing operation. The device is to be designed for domestic use and as such it should be designed as a complete “Product”, something which could, and would be bought in a shop. Detailed Specification 1) The device, when being operated, shall be able to be wall or table mounted. 2) When not in use, the device shall stow or fold into a 400mm x 150mm square, spacial volume, and have the facility to be hung/ stowed on a wall. 3) The device is to be hand powered alone to compress /compact the soaps. 4) The device shall use water as a means of softening the soap scraps. 5) The device during operation shall be water tight, and have filling and draining facilities. 6) The device shall be designed for ease of cleaning. 7) The device shall be safe to operate, and stow as in 2) 8) The device shall be designed for mass manufacture,100,000 units sold/ year 9) The selling price of the “ Soap Compactor Product” is to be £35 each based on 8 10) The device is to be designed in accordance with British Standards for Domestic devices. 11) The total mass of the device is to be no greater than 2kg dry (without any water added) 12) The design must cater for right or left handed users. Sections: 1) Conceptual Design ( overall design concepts) 20% 2) Detail design ( detail part design, design calcs. ,material choices,) 20% 3) Structural Analysis ( of a single element of your choice , by Catia) 20% 4) Cost Analysis (cost breakdown of designed and Standard parts) 20% 5) Technical Drawings ( 2D Assembly+BOM and 2 part drawings) 20% Total 100% Detail: The device or product shall be conceived from at least 5 concepts of which ONLY one is chosen by a Design Selection Table. Once a concept has been chosen, you are required to do some design calculations to verify the feasibility of the concept. Detail design then follows , whereby any structural analysis or other design calculations are performed. Once the concept has been verified by design calculations, the design should be formally modelled up on any CAD system. The design is to be realised using any Solid modelling package such as Solid Edge, Catia , SolidWorks Etc.
Ταυτότητα εργασίας: 17191681

Σχετικά με την εργασία

8 προτάσεις
Απομακρυσμένη Εργασία
Ενεργός/ή 6 χρόνια πριν

Ψάχνεις τρόπο για να κερδίσεις μερικά χρήματα;

Πλεονεκτήματα πλειοδοσίας στο Freelancer

Καθόρισε τον προϋπολογισμό σου και το χρονοδιάγραμμα
Πληρώσου για τη δουλειά σου
Περίγραψε την πρόταση σου
Η εγγραφή και η πλειοδοσία σε εργασίες είναι δωρεάν
Βραβεύτηκε στον/στην:
Avatar Χρήστη
£21 GBP σε 3 ημέρες
0,0 (0 αξιολογήσεις)
0,0
0,0
8 freelancers δίνουν μια μέση προσφορά £109 GBP για αυτή τη δουλειά
Avatar Χρήστη
Hello i am expert in 3D Modelling, Animation. If want any demo please one time message me. I will provide quality work.
£127 GBP σε 3 ημέρες
5,0 (7 αξιολογήσεις)
3,8
3,8
Avatar Χρήστη
Hello! I want to work on your project. Please, write more detailed information to my message section and let`s talk on the project. Thank`s in advance.
£150 GBP σε 3 ημέρες
5,0 (8 αξιολογήσεις)
3,6
3,6
Avatar Χρήστη
Hi I can do the job for you +8 years working in architectural offices and companies have given me an understanding of how to engage with clients to provide quality customer service. I have worked with over 40 clients on 70 different projects locate in multiple countries. I worked in projects in the Arabian Gulf, in the Middle East especially Turkey and Lebanon, different countries of Africa, Kazakhstan and Pakistan, UK and USA. You can see in my Upwork profile that I have done projects for different kinds of buildings and sites. I would be happy to make interview for this job to give you a better understanding of my qualifications. Please take a look at my portfolio on my Upwork profile and the attached portfolio to see other projects. Thank you
£150 GBP σε 3 ημέρες
0,0 (0 αξιολογήσεις)
0,0
0,0
Avatar Χρήστη
Hi, I am  having B.E Mechanical and  MBA in Operation Management with 13 Years experience in Engineering Design and R&D various products such as, -Gear and Gearbox , -CNC Machinetool, -Industrial Products -Cosumer appliances Washing machine -Off highway vehicle like Tractor ,Combine Harvestor,Baler, Windrover etc.. - Reliability engineering. Also experienced in - Sheets metal design - Plastic parts design. - Risk Assessment -Technical Writing - 3D Modelling and drawing creation in different software's like    Pro E, Solid works,Inventor Auto cad Etc - Different type of analysis. Thanks and Best Regards Karthikeyan Arumugam
£150 GBP σε 5 ημέρες
0,0 (0 αξιολογήσεις)
0,0
0,0

Σχετικά με τον πελάτη

Σημαία της INDIA
Ernakulam, India
0,0
0
Επαληθευμένη μέθοδος πληρωμής
Μέλος από Φεβ 5, 2014

Επαλήθευση Πελάτη

Άλλες δουλειές από αυτόν τον πελάτη

Do some 3D Modelling -- 1
£20-250 GBP
Do some 3D Modelling -- 2
£20-250 GBP
Ευχαριστούμε! Σου έχουμε στείλει ένα email με ένα σύνδεσμο για να διεκδικήσεις τη δωρεάν πίστωση σου.
Κάτι πήγε στραβά κατά την προσπάθεια αποστολής του email σου. Παρακαλούμε δοκίμασε ξανά.
Εγγεγραμμένοι Χρήστες Συνολικές Αναρτημένες Δουλειές
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Φόρτωση προεπισκόπησης
Δόθηκε πρόσβαση για Geolocation.
Η σύνδεση σου έχει λήξει και τώρα έχεις αποσυνδεθεί. Παρακαλούμε συνδέσου ξανά.