Find Jobs
Hire Freelancers

arduino uno

$10-30 USD

Κλειστή
Αναρτήθηκε περίπου 9 χρόνια πριν

$10-30 USD

Πληρωμή κατά την παράδοση
i need someone to write a code for sawtooth, reverse sawtooth and noise waveforms using an arduino uno with a frequency between 1hz to 500hz
Ταυτότητα εργασίας: 7947119

Σχετικά με την εργασία

23 προτάσεις
Απομακρυσμένη Εργασία
Ενεργός/ή 9 χρόνια πριν

Ψάχνεις τρόπο για να κερδίσεις μερικά χρήματα;

Πλεονεκτήματα πλειοδοσίας στο Freelancer

Καθόρισε τον προϋπολογισμό σου και το χρονοδιάγραμμα
Πληρώσου για τη δουλειά σου
Περίγραψε την πρόταση σου
Η εγγραφή και η πλειοδοσία σε εργασίες είναι δωρεάν
23 freelancers δίνουν μια μέση προσφορά $32 USD για αυτή τη δουλειά
Avatar Χρήστη
Hi, We are a team of engineers with more than 10 years of experience in designing and developing various digital and embedded systems... Currently, apart from our R&D, we help engineering students to complete their academic projects. Also conduct seminars and workshops on Microcontrollers and Robotics... So we have experienced with a lot of Microcontrollers such as PIC, AVR, ARM, Arduino etc. We are also experienced with a lot of sensors and sensor modules.... We are very proficient with PCB desingning tools such as EAGLE, KICAD etc... We have done a lot of projects with arduino, please check my completed projects and reviews given by other employers...:-) We really would like to know more about your project, kindly let me know if you are interested...:-) Thank You
$30 USD σε 1 ημέρα
5,0 (7 αξιολογήσεις)
4,3
4,3
Avatar Χρήστη
Hi dear I'm chamika and expert with arduino I have already done this you can see them in the portfolio , I did it for FPGA you need 8 bit resolution ? Thanks
$30 USD σε 1 ημέρα
4,9 (3 αξιολογήσεις)
4,0
4,0
Avatar Χρήστη
hi sir i am an expert electrical engineer i can do it for you. please consider me for your job i assure you quality work and on time delivery
$30 USD σε 1 ημέρα
5,0 (7 αξιολογήσεις)
3,8
3,8
Avatar Χρήστη
Over 12 years of experience in electronics hardware and software design. Proficient in software and hardware design of embedded systems. Successful in planning and management of entire development and production cycle. Programming languages: C, C++, Ada, Pascal, MATLAB, GPSS, VHDL Processor architectures: 8051, AVR, ARM-M3, ARM-R4, ARM-7, x86, PicoBlaze, PSoC, PIC FPGA and CPLD architectures: Cyclone, MAX, Spartan, CoolRunner Set of rules to be stated before work: - All milestones should be backed up by you. So you release the money for milestones when you receive work done for each milestone and happy with it. - All decisions that I will make during the development that were not stated in project description I may do on my own understanding. I may ask you, if something was not described but not necessary I will do so. - Any changes that are to be entered by you for the project description, results, milestones, etc. after me accepting the project are subject to discussion and may lead to extra payment. - Next milestone work will begin only after finishing the previous one and releasing payment for it. - Prototype cost, delivery costs, components, PCB manufacture and other costs not connected with solely my services are extra payed when they are determined.
$157 USD σε 5 ημέρες
5,0 (2 αξιολογήσεις)
3,4
3,4
Avatar Χρήστη
Good day! I think I'm perfect for this job. I'm a Registered Electrical Engineer here in PH and specializes in electronics and programming. If you're interested, you can easily drop me a message anytime here in Freelancer.
$30 USD σε 2 ημέρες
4,0 (1 αξιολόγηση)
3,2
3,2
Avatar Χρήστη
Hello, For this problem there is a very simple solution, the schematic is plain simple, and the code will be made easy to use for your convenience. All will be delivered in 24 hours from acceptance, and will contain oscilloscope graphs, code, schematic and code documentation. If you have any questions, dont hesitate to ask. Best Regards, Mihail Vrachanski
$20 USD σε 1 ημέρα
5,0 (3 αξιολογήσεις)
2,3
2,3
Avatar Χρήστη
A proposal has not yet been provided
$24 USD σε 1 ημέρα
5,0 (1 αξιολόγηση)
2,0
2,0
Avatar Χρήστη
Dear sir I can create the required signals digitally using arduino uno, please message me so that we can discuss
$24 USD σε 1 ημέρα
0,0 (0 αξιολογήσεις)
0,0
0,0
Avatar Χρήστη
A proposal has not yet been provided
$55 USD σε 1 ημέρα
0,0 (0 αξιολογήσεις)
0,0
0,0
Avatar Χρήστη
A proposal has not yet been provided
$35 USD σε 1 ημέρα
0,0 (0 αξιολογήσεις)
0,0
0,0
Avatar Χρήστη
A proposal has not yet been provided
$25 USD σε 3 ημέρες
0,0 (0 αξιολογήσεις)
0,0
0,0
Avatar Χρήστη
I am an Electrical Engineer from NUST, Pakistan. I have done my FYP using Arduino so I will be able to complete this project before the specified time.
$20 USD σε 2 ημέρες
0,0 (0 αξιολογήσεις)
0,0
0,0
Avatar Χρήστη
La propuesta todavía no ha sido proveída
$30 USD σε 1 ημέρα
0,0 (0 αξιολογήσεις)
0,0
0,0
Avatar Χρήστη
A proposal has not yet been provided
$20 USD σε 2 ημέρες
0,0 (0 αξιολογήσεις)
0,0
0,0
Avatar Χρήστη
A proposal has not yet been provided
$25 USD σε 1 ημέρα
0,0 (0 αξιολογήσεις)
0,0
0,0
Avatar Χρήστη
Working on arduino for the last past 3 years hope to complete the project on time/. You require a sawtooth waveform....
$30 USD σε 2 ημέρες
0,0 (0 αξιολογήσεις)
0,0
0,0
Avatar Χρήστη
I've worked on arduino in my stratospheric near-space balloon mission. I've also worked with arduinos for auto-pilots in Drones. I have enough experience to finish this perfectly and on time.
$15 USD σε 2 ημέρες
0,0 (0 αξιολογήσεις)
0,0
0,0
Avatar Χρήστη
Hi, we're a group of electrical and electronic engineers. We have experience working with Arduino. We can surely complete your requirement. Could you please share more details? - Do you want to generate sawtooth, reverse sawtooth and noise signals on separate output pins? - How do you want to change signal frequency, noise level? By manually change code then re-compile it or automatically configure it via UART terminal of PC? Regards,
$15 USD σε 1 ημέρα
0,0 (0 αξιολογήσεις)
0,0
0,0
Avatar Χρήστη
My previous Arduino and C experience will allow me write the code required for your project. I have done school and professional level projects using the Arduino and am capable to not only write the code, but ensure it fits your specific application. As a native English speaker I have strong English communication skills and can easily answer any questions you may have about the project
$15 USD σε 1 ημέρα
0,0 (0 αξιολογήσεις)
0,0
0,0
Avatar Χρήστη
Hi, Greetings! I am experienced and Qualified B. Sc Electrical Electronics Engineer with 5 years of experience in Embedded systems and Automation's (200 + Projects) .I have read your requirements and understand your project, I would like to discuss more about your project and start work immediately. For more you can view my resume by clicking https://www.freelancer.com/u/enggrsujad.html. I am just a click away. Have Good Day ahead. Regards Engr Sujad
$25 USD σε 1 ημέρα
0,0 (0 αξιολογήσεις)
0,0
0,0

Σχετικά με τον πελάτη

Σημαία της UNITED STATES
United States
0,0
0
Επαληθευμένη μέθοδος πληρωμής
Μέλος από Ιαν 18, 2015

Επαλήθευση Πελάτη

Ευχαριστούμε! Σου έχουμε στείλει ένα email με ένα σύνδεσμο για να διεκδικήσεις τη δωρεάν πίστωση σου.
Κάτι πήγε στραβά κατά την προσπάθεια αποστολής του email σου. Παρακαλούμε δοκίμασε ξανά.
Εγγεγραμμένοι Χρήστες Συνολικές Αναρτημένες Δουλειές
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Φόρτωση προεπισκόπησης
Δόθηκε πρόσβαση για Geolocation.
Η σύνδεση σου έχει λήξει και τώρα έχεις αποσυνδεθεί. Παρακαλούμε συνδέσου ξανά.