Project is to create a greenhouse controller, which monitors - Temperature/Humidity and Moisture.
The Arduino Currently has attached:
# LCD display (16x4).
# DHT thermometer/humidty sensor.
# Moisture sensor.
# Real time clock.
# Micro SD card.
# 4 Relays
# 5 Switches - Up, Down, Left, Right and Enter.
A creation of a Basic Menu system to save settings to the device through either EEPROM or SDCARD. Refer to Image.
4 Main options which are
#Temperature Settings, of which the user can set upper or lower limits, of which each can be turned on or off, if "on" to the next menu, if "off" to go back to the main menu - the "On" menu will have a temperature that can be set and then an option to select an output 1-4.
#Same for the Humidity
#Same for Moisture.
Finally a Timer settings of which 10 timers can be set, with an on or off setting, if on to allow the user to set the time of which an output will happen. With the RTC constantly checking the time and if any set time is reached to output.
All outputs with the enablement of setting output seconds before the output is turned off.
See image for Menu Images.
Any Questions please ask.
Hi
Sir I am an expert Arduino Programmer . I have bachelors in electronics. I have read your details and can do it easily, I have interfaced the same sensors and other things already with arduino therefore your project can be done very quickly.
I assure you quality work and on time delivery Money is secondary thing to me I believe in relations. If you have any issue with the price please discuss. I am waiting for your reply to start
Regards
hi i am an electrical engineer. i have strong skill set related to Arduino development. i have worked on many projects related to Arduino. i can do this project for you. let me know if you are interested and we will discuss the details.
Hello,
Have a great Day. We will deliver a fully working prototype based on the requirements. We have a fully equipped lab to test the hardware.
Please feel free to contact.
Best regards,
shahbaz.
Hello:
I am perfect for this job and I have already done similar project using Arduino . I have all these hardware so that I can test it show you the demo. Please feel free to write back if you consider.
Thank you
Sam
Hello!
I am interested in your offer!
I have experience in programming (over 10 years) for power electronics with microprocessors PIC (microchip), AVR (ATMEL), STM32 (STeleсtronics) and Arduino's.
I recently registered here, and willing to work for a small cost, because I need to improve the rating.
Examples of my work you can see in the portfolio
Waiting for your reply.
Hello, if you still interested in this project, I can do it.
I have experience in coding menu for LCD displays, reading different sensors and using timers.
Excuse me for this price, but it necessary to full development according your specification, also testing and debugging - if you want 100% working device.
Thank you, if you want change this project, I'm always ready to help.
Hi,
I have worked on several Arduino/Raspberry pi projects. This code should be designed carefully to fit in to the program memory. There are lot of strings on the code and so the memory could be the constraint here. Let me know which arduino you are using (uno or mega or some other variant) to get the memory spec. Similarly the EEPROM layout and management should be done carefully so that read/save could become easy to do.
Thanks!
Hi,
Thanks for the interest in my profile. I can deliver complete project including schematic and firmware with best quality on time.
I've excellent embedded system design skills from the electronics component selection to the documentation including schematic design, firmware/application development, maintenance.
Also I'm happy to provide you after delivery support such as any clarifications/upgrades on hardware or software.
Looking forward to work with you.
Thanks and kind regards,
Venu
I'm electronic and telecommunication engineer. I have done several complex projects with Arduino. Examples are ground wheeled robots,quadcopters and other several projects. I'm sure I can help you on this work.
Thank you.
I am proficient in C programming, management, Arduino broadly and Pic, also I have knowledge of sensors, actuators, appliances, LCD. Sure I can solve your problem. Hire me and I guarantee a good job.
Greetings!
My name is Daniel Grujicic and I am an Electronic Engineer
I'm very exciting to start to work in this project; I would love to have this opportunity
I have experience in microcontrollers, Arduino and Freescale. I have an arduino mega and a lot of sensors in my house (temperature, humidity, LCD 2x16, etc)
I can start this work immediately and I will dedicate all my time.
I believe communication is key to any successful project, so, It could be very helpful to discuss the details of this project. Please, let me know a time that works best for you.
Thanks for your time
Regards, Daniel Grujicic.
Hi there!
Electronics engineer here. I'd happy to help with your project. I have done several projects which involved user interfaces with LCDs. I'm interested in your design because currently I am building a similar system to my garden.
As I can see here there's nothing much to do with hardware. Most of the project will be coding and developing a proper algorithm.
I cannot exactly predict the time need to finish the project because it needs some time to test.
Let me know if you're interested.
Best Regards
Hi, I am an Electrical engineer and expert in embedded systems and circuit design. I have done many projects using arduino like line following robot using PID controller, speed control of motor, gsm module control etc. I assure you I will complete the project according to your requirements. Thanks