Communication software for exchange information by RS232 (COM port), send parameters, display info on screen -- 3

The Software – contains 3 pages (tabs) for configuration of Battery Management System (BMS). Each page has to display certain info and input parameters. The info will be received – sent to BMS via serial interface The software is good to be made portable – no installation, no external libraries, frameworks, – similar to the sample software attached in the pack. For PC only. No Java please. MS Visual Sudio, C/C++, C# - whatever - clean code – with comments. First page - status - all battery cells in table - 9-30 rows, split in two columns, 10 other parameter, 16 status flags. The software have to read parameters COM port every 1 sec to refresh the page Read status from the BMS – see the XSL file, and the example files in folder “Page1” // READ Buffer 3, Read Buffer 4 – see sample code – is reading the command #3 and command #4 to buffer. Section 2 – BMS Status – check bits of Command 3, byte 17, 18 – see sample code. Section 3 – Cell voltages – balancing – see the sample code Selecting com port button is necessary to be located there – select from the valid COM ports Page 2 – all parameter have to be read in array – position number to match the command number – see the sample files - Write the parameters to the [login to view URL] There are about 60 parameters to show, edit, store on disk or send to the BMS via RS232 Read from BMS will read all parameters in array (16 bit each parameter) – display on the screen – see the Page2.jpg. If possible this page to be similar style/colors like page 1 Write to BMS – write all parameters to the BMS via RS232 Also option read/write to file – could be any format – saved on the disk. Probably BIN file. page 3 – Calibration There are sample files with the commands to the e BMS The values of the voltage and the current have to be read every second – Same as the Page 1 If there are cells in balancing – they have to show in red. On top – button – stop balancing. In White are fields that have to be filled – there is a button to submit the calibration value – next to each field. Will be provided sample C code for the reading parameters from COM port and all commands for reading / writing the parameters. The interface is already designed at MS VS - but need improvement.