Find Jobs
Hire Freelancers

Adding parts on an existing electronic

€12-18 EUR / hour

Κλειστή
Αναρτήθηκε περίπου 7 χρόνια πριν

€12-18 EUR / hour

We have an electronic to run a motor and to check a battery. Right now, we are soldering manually a small "motor stop" unit at the existing pcb. The job is to combine the two electronics into one unit and to add also the new battery check parts at a new microchip (ATMEL) output. You should also make suggestions to the output we should use and you should also have the skills to check if both parts can be compbined or not.
Ταυτότητα εργασίας: 13396585

Σχετικά με την εργασία

16 προτάσεις
Απομακρυσμένη Εργασία
Ενεργός/ή 7 χρόνια πριν

Ψάχνεις τρόπο για να κερδίσεις μερικά χρήματα;

Πλεονεκτήματα πλειοδοσίας στο Freelancer

Καθόρισε τον προϋπολογισμό σου και το χρονοδιάγραμμα
Πληρώσου για τη δουλειά σου
Περίγραψε την πρόταση σου
Η εγγραφή και η πλειοδοσία σε εργασίες είναι δωρεάν
16 freelancers δίνουν μια μέση προσφορά €16 EUR/ώρα για αυτή τη δουλειά
Avatar Χρήστη
Hello. I'm an electrical engineer/PCB designer. You may check my qualification in the profile . Your project is interesting for me. We may discuss any questions
€12 EUR σε 40 ημέρες
4,9 (77 αξιολογήσεις)
6,2
6,2
Avatar Χρήστη
Hello! I am interested in your offer! I have experience in Electronic design, PCB layout, Microcontroller programming and prototyping over 10 years for power electronics with microconttrollers: PIC (microchip), AVR (ATMEL), Arduino, STM32 (STeleсtronics) and others. Examples of my work you can see in the portfolio. Waiting for your reply. Best regards, Denis Mark.
€12 EUR σε 40 ημέρες
4,9 (28 αξιολογήσεις)
5,3
5,3
Avatar Χρήστη
Hi, I have qualification and experience as electronics engineer. I am working mainly with Arduino platform. I can modify your schematic design according your requirements. Also I can do PCB design for your project. Regards, Slavi.
€16 EUR σε 20 ημέρες
5,0 (9 αξιολογήσεις)
5,1
5,1
Avatar Χρήστη
Hi. I have looked your two attachment here, and I'm interested to take the job. I have 6 years experiences with atmel microcontroller and I'm confident enough that I can help you with this job. For this job, I will do it in 15 hours, so the cost will be 225 euros (15/hour). Of course we can still discuss it. Feel free to contact me. Thank you.
€16 EUR σε 40 ημέρες
5,0 (4 αξιολογήσεις)
2,6
2,6
Avatar Χρήστη
Hi Sir, hope you are doing well . There is no friend or foe in business. I know your full project and I remember that you didn't provide me that motor stop before when we are doing RFID project. That was your big lie. Anyway you won the dispute congratulations :) Now I am the only freelancer here on this entire earth who know your project very well. So we can again start cooperating with each other. I can integrate that motor stop circuit into your existing PCB. If you agree than please discuss with me ,,,,, If you don't like than my best wishes for you sir. Have a good day ! Regards, Ahmad
€22 EUR σε 40 ημέρες
2,8 (5 αξιολογήσεις)
3,9
3,9
Avatar Χρήστη
Hi, Please share your complete project requirements/task expected from us. Also, we can reduce the overall Size of the unit, no of components required, and can add more features. About us: We have 10 years of experience in Product development. Micro-controllers we can work on PIC, STM32, PSOC and AVR and also we have all the development kit and instruments available with us. For PCB design we use KICAD v4. And for GUI C# / LABVIEW will be used. Thanks and Regards, Santosh
€22 EUR σε 40 ημέρες
5,0 (1 αξιολόγηση)
1,1
1,1
Avatar Χρήστη
Hello dear employer, pleas look my profile , i can help for 8$ hour................................................................................................................thank
€12 EUR σε 40 ημέρες
0,0 (0 αξιολογήσεις)
0,0
0,0
Avatar Χρήστη
I can work for 4 to 5 hours/day. For your project.
€14 EUR σε 30 ημέρες
0,0 (0 αξιολογήσεις)
0,0
0,0
Avatar Χρήστη
Dear Employer. I have read your job carefully and I can help you , i think. I have very experienced in electronic engineering and embedded system. If you choice me on this project, you will be satisfied from my product. I hope to discuss more details for your job. Thanks.
€16 EUR σε 40 ημέρες
0,0 (0 αξιολογήσεις)
0,0
0,0
Avatar Χρήστη
Hello, i'm an alectronics engeener with many years of experience in pcb design. I can do this job for you, anyway i do a list of my skills: - Altium, Orcad Pads -pspice analog-mixed simulation -matlab -C programming on ARM STM32F4(keil compiled), microchip pic(mplab), 8051. Arduino (atmel studio) -smd prototyping : from schematic to pcb and component soldering and pcb testing upon specifications I'm currently working in italy on a project to a company: the aim of this project is to protect electric motor from dangerous working conditions(overload, overtemperature protection, missing phase(3 phase system), undervoltage line and phase factor protection to avoid under mechanical load ) Best Regards Enrico Tosato
€18 EUR σε 40 ημέρες
0,0 (0 αξιολογήσεις)
0,0
0,0
Avatar Χρήστη
A proposal has not yet been provided
€16 EUR σε 10 ημέρες
0,0 (0 αξιολογήσεις)
0,0
0,0

Σχετικά με τον πελάτη

Σημαία της AUSTRIA
Egg, Austria
5,0
13
Επαληθευμένη μέθοδος πληρωμής
Μέλος από Μαρ 29, 2016

Επαλήθευση Πελάτη

Ευχαριστούμε! Σου έχουμε στείλει ένα email με ένα σύνδεσμο για να διεκδικήσεις τη δωρεάν πίστωση σου.
Κάτι πήγε στραβά κατά την προσπάθεια αποστολής του email σου. Παρακαλούμε δοκίμασε ξανά.
Εγγεγραμμένοι Χρήστες Συνολικές Αναρτημένες Δουλειές
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Φόρτωση προεπισκόπησης
Δόθηκε πρόσβαση για Geolocation.
Η σύνδεση σου έχει λήξει και τώρα έχεις αποσυνδεθεί. Παρακαλούμε συνδέσου ξανά.