Find Jobs
Hire Freelancers

Assembly Code for MSP430 calculator

$30-250 USD

Ολοκληρώθηκε
Αναρτήθηκε πάνω από 8 χρόνια πριν

$30-250 USD

Πληρωμή κατά την παράδοση
I need the assembly code for a calculator using an MSP430, a 16x2 keypad and a 4x4 LCD. The operations include addition, multiplication, division and subtstraction. When the calculator is turned on, the question Ready is asked. The user then enters the desired operation. Negative numbers are allowed. For division, at least three signficant figures must be presented. The user is asked if another operation is wanted until he says no, and then the calculator turns off. I also need the schematics of the connections/interface between the MSP430, the LCD and the keypad. Deadline is a day.
Ταυτότητα εργασίας: 9037043

Σχετικά με την εργασία

3 προτάσεις
Απομακρυσμένη Εργασία
Ενεργός/ή 8 χρόνια πριν

Ψάχνεις τρόπο για να κερδίσεις μερικά χρήματα;

Πλεονεκτήματα πλειοδοσίας στο Freelancer

Καθόρισε τον προϋπολογισμό σου και το χρονοδιάγραμμα
Πληρώσου για τη δουλειά σου
Περίγραψε την πρόταση σου
Η εγγραφή και η πλειοδοσία σε εργασίες είναι δωρεάν
Βραβεύτηκε στον/στην:
Avatar Χρήστη
hi there i can do the project in 36 hours after you award me the project and i have one question that what is the largest number user can enter in the calculator
$250 USD σε 2 ημέρες
4,8 (6 αξιολογήσεις)
3,3
3,3
3 freelancers δίνουν μια μέση προσφορά $305 USD για αυτή τη δουλειά
Avatar Χρήστη
A proposal has not yet been provided
$277 USD σε 3 ημέρες
0,0 (0 αξιολογήσεις)
0,0
0,0
Avatar Χρήστη
Hi I am a very competent programmer and embedded electronics developer and if I had all the environment and compiler etc. setup on my machine I would do this in an evening. I have not worked with the MSP430 and don't have access to hardware. What I am offering is the conceptual architecture and design of your project. If you just give me a reference to your development board or which processor you are using I will provide you with schematics on how to connect LCD and keypad and a well structured program in pseudo code. I will of course write the assembly code also, but as I can not test it we need to work to together in the final stage of getting it running.
$388 USD σε 2 ημέρες
0,0 (0 αξιολογήσεις)
0,0
0,0

Σχετικά με τον πελάτη

Σημαία της PUERTO RICO
Philadelphia, Puerto Rico
5,0
1
Επαληθευμένη μέθοδος πληρωμής
Μέλος από Νοε 30, 2015

Επαλήθευση Πελάτη

Ευχαριστούμε! Σου έχουμε στείλει ένα email με ένα σύνδεσμο για να διεκδικήσεις τη δωρεάν πίστωση σου.
Κάτι πήγε στραβά κατά την προσπάθεια αποστολής του email σου. Παρακαλούμε δοκίμασε ξανά.
Εγγεγραμμένοι Χρήστες Συνολικές Αναρτημένες Δουλειές
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Φόρτωση προεπισκόπησης
Δόθηκε πρόσβαση για Geolocation.
Η σύνδεση σου έχει λήξει και τώρα έχεις αποσυνδεθεί. Παρακαλούμε συνδέσου ξανά.