Sensortag appεργασίες

I want to use a chinese sensortag that uses Nordic chip nrf52810 or nrf52832. I need a firmware modification that makes the tag enter in advertising mode for a define period whenever a movement is detected and goes to standby after a given period without movements. The movement will be detected by a built-in accelerometer in the sensortag.

...questions with initial response or start your response with “No Questions” to confirm your compliance. We have 3 TI Sensortag CC2650STK with onboard inertial sensors units in office. CC2650STK Development kit | TI may have upgraded it now. If so, please inform us & we shall review the use of it. This is a dev kit, (the MCU is CC2560) so the final solution will run on the runtime version, which you also need to help identify and use. If you know better mousetrap for this need, please advise with details for approval. We shall refer to it as ST from now on. Please refer to attachment for more info. We need you to build software app for external gateway (X-platform for Windows, Linux, Android, Apple) and any embedded software work on ST needed

I want to use a VL53L0X (time of flight distance measure sensor), and send the measurement at specific intervals by radio to a receiver at aprox 20-30 metrs distance. The device must be powered by a small battery, so it needs to be in sleep mode most of the time. I thought about using a TI SensorTag or something similar as sender/receiver

I am working on a time-series machine learning project that requires high quality motion data. My software is currently working with a Texas Instruments CC2650 SensorTag, but I want a smaller design that is in-house.

Please read before bid: - MY BUDGET IS FIXED AT 80 AUD. Any bid over this limit is ignored. - You must have a previous experience with Bluetooth on Android at low level to be able to complete this task so please don't bid if you have no experience with Low Energy BLE. And about the task.. I need an android app that utilises mobile BLE at low level (GATT, GAP). Required functions: 0- Source code must be hosted on Bitbucket - free account is available. You need to have basic familiarity with git commits required. 1- Scan in background as an Android Service for Bluetooth devices and list them on screen. the following information should be displayed for each device: 1.1 Name, UID, RSSI 2- Being able to configure a list of "White List" and retain it in a SQLite data...

TI Sensortag CC2560 () A simple app to connect with Sensortag cc2560 that executes the following tasks: 1) The app connects automatically to the nearest sensor when it is opened. a. If there is three active sensortag near the cellphone, the app will connect to the device with higher signal strength; b. the app shows a QRcode representing the MAC address of the device that the app is connected (if the app is connected to one) 2) The app will show the x acceleration read from the sensor and present the value as a text. 3) The app will present two buttons (1 and 2). a. If the user presses the button 1, the app will change the connection frequency with the sensor and update the acceleration data (item 2) at ...

i want to build a smart keychain.i want to use simplelink sensortag () from texas instruments..first, I need an android app to link the sensor device with the smartphone(with Bluetooth).next, i want the smartphone app to have one button, and when i press it i get a buzzer and sound from the sensor..i need to use the accelerometer to give me information if my sensotag moving and last to use a temperature sensor to get information if my sensortag is in my pocket

...sweat and rain, and ideally use water resistant connectors for the external sensors. External sensors will consist of eight (8) fabric-based sensors integrated into the cap. Nominally each sensor is connected via a mico-coax cable, for 16 total conductors. Ideally this board will be as tightly packed and physically small as possible. In many ways, this board will be quite similar to the TI “SensorTag” reference design (attached). Note especially RF design guidelines and section 7.3, Layout recommendations. High level requirements follow: I. Physical a. Total board size should not exceed 30 x 40mm and be as thin and light as possible. b. Board is expected to be 4 layer unless significant advantages can be gained otherwise. c. All corners should be rounded w/ m...

Project: We are using 3 units of TI SimpleLink dual-band CC1350 wireless MCU SensorTag. Work to be done: 1. Activate the microphone in 1 sensor 2. Create an Application (Android and IOS) to collect gyroscope, accelerometer and microphone (in 1 sensor) date from the 3 sensors simultaneously via Bluetooth. TI provides an open source SDK for development of application using this device. 3. Application will record and relay data after detecting a button click on device and stop recording on click of same button again 4. After every recording application will show a form with following inputs to the user a. Player name b. Coach name c. Type of club d. Distance of the hole (target) from the player e. Path taken by ball (one of the three - left to right, right to left or strai...

I need a simple modification of FW Sensortag CC2650STK, basically: Using the T.I Sensortag CC2650STK with DEVPACK - Create a simple FW to monitoring the position based on the Accelerometer data, trigger the alert using the Buzzer and accumulate how many times the event ocurred. Premises - It must use Code Composer. - All other sensors must be disabled and if possible out of the code. The HW project will not have other sensor, only ACC. - The Complete Source Code is required as deliverable. Desirable - A very simple Android Studio App. to Test / Show the funcionalities working.. The Device behaviour needs some STATES: - SETTING - When connected with App. Connects and Set: - INTERVAL - Time beween Acc. read. It is a not critica...

...communicate: temperature, humidity, and luminosity to a central "gateway" or “bridge” which is connected to the internet, and sends that data to our cloud application. How you can help... We need your help designing and programming a Zigbee sensor network. We want to stick with the following for our sensor end devices: We are open to discussing if you think you could make an Xbee work as a coordinator radio, but we think it’s probably better to use the following as the coordinator radio: Let us know. Below are more precise specifications on what we need: - Sensor end points must have a 6 month battery life on a 3v battery. - Network must be able to support

...two sensor devices will be involved it could presumably be done better than with many similar devices currently available. I will need a cruder prototype developed first using off-the-shelf sensors to do some initial testing with, and I will need sound advice regarding what hardware to choose from the many such devices available now. For instance, I have no idea whether something like the TI SensorTag might work great or horribly for a prototype for this particular device. I am also unsure at this point whether I should first pursue an application that runs via a regular computer or phone device, or even if there is a substantial programming difference between them. But a discrete wireless sensor design would presumably thereafter be needed. I am interested in hearing from...

I would like to store sensor data from either a TI Sensortag 2 and/or a Samsung Gear 2 watchs (or MOTO 360 watch) in a Microsoft Azure cloud database. Sensor data includes accelerometer, gyroscope and magnetometer. Database is already built and currently connected to an Android app.

Create a simple android application that makes use of CC2650 SensorTag. Base app is already done to be able to connect more than 1 SensorTag. Feature that is needed Ability to set thresholds for values and activate alerts when values go above or below the set thresholds. Home Page - Displays all connected sensor tags Settings Page - Modify settings according to sensor tag (different for each) Alerts Page - Summary View of all outstanding alerts

TI Sensortag parts clone with aesthetic layout.

...(MEMS) sensors are emerging on the market and can be used in a wireless sensor network (WSN) for structural health monitoring. We are hiring a developer to build a customized WSN for vibration monitoring. The R&D engineer will be responsible for developing prototypes of a compact, low-cost, low-power, wireless vibration sensor node based on Texas Instruments CC2650STK SimpleLink™ Bluetooth® Smart SensorTag. The sensor node is a node in a WSN that is capable of gathering vibration and motion data, performing some processing and communicating with other connected nodes or gateways in the network. The wireless sensor node should include an accelerometer, a micro-controller, a signal transceiver, an analog-to-digital converter (ADC), memory, and a power source, all hou...

We have a Ble Sensortag from Texas Instruments. The firmware is currently written in c. We need to modify the existing firmware to store data when offline and send it over Ble when requested. Developer will need access to Code Composer Studio workbench in order to compile. Developer needs to have experience with low power development and experience with cc2650.

Otro o no estoy seguro C o C++ TI Sensortag firmware modifications to store values when offline.

Hi! I have a couple of sensortags that I want to act ...raspberry pi. However due to down time on the rpis the sensortags are going to sleep due to no active connections. Consequently I want to configure the sensortag stack to do the following.... 1. Advertise indefinitely so that when the rpi is down they dont go to sleep and reconnect automatically when the rpi comes up. They should advertise at the max allowed interval to save on battery. 2. Deliver humidity readings at 30sec intervals or the max interval allowed if 30secs is to too long. Again to save on battery 3. Finally to power down other activities to save on battery. Can you help with this? Obviously you need to be familiar with the sensortag stack and debugger software and C. Thanks and happy bidding. A...

I need some one with some experience with the sensor tag. This would be an ongoing opportunity for the right person. Thanks

... To update the on-board user created software application or download the firmware into Sensor tag, you need to use cc-Devpack-debug : The stock firmware of Sensor tag is already publishing the data of 10 DOF (3-axis accelerometer combined with a 3-axis gyroscope & combined with a magnetometer (compass), with a Baromic pressure sensor.) over to Bluetooth if connected to any receiving device. Our Requirements: You will create the following… A Mobile app (Android) talking to the CC2650 via Bluetooth. There will be 3 operating modes of the device: Off, Calibrate, Run. Settable via the Mobile app. In Off mode, the device (Sensor Tag) will not repeatedly publish

Need to have a simple app written for Android OS based on the SimpleLink™ Bluetooth Smart®/Multi-Standard SensorTag. I am looking for someone to display the Temperature and Humidity output data of the SensorTag on my Android-based Smartphone. In a follow-on job the winning bidder may be asked to do the same thing for iPhone. I do not possess dev kits for the SensorTag or iBeacon which may be necessary to have to complete the job.

Hi all, I have a CC2650STK Sensortag + debugger which I need to program for a School project. I have a analog current DC which I want to read via the ADC on the cc2650stk and transmitt via Bluetooth. If you know the Ti CCS or the Sensor Controller Studio please apply. After the Sensortag is working you should give me a short description of the code. I don't want you to spend days on reading the CCS manual (and me paying that) so please apply if you know what you do. Then it should take you 15 minutes. Cheer Daniel

create a wireless sensor network hardware using QNX BeagleBone Black and Odessey sensor kit. the reference 6LOwPAN. More ref Attached. we are not using odessey any more . we want to use the CC2538 Development kit to create the 6LowPan. and the Ti SimpleLink Multi-standardTag Development kit for sensing.

Looking for developer who are able to deal with ios development with Bluetooth communication. The application will be used as prototype for user test. A simple application that is able to communicate with peripheral device via Bluetooth. the peripheral device is Ti Sensortag CC2650 without any modification. The application gets acceleration, light intensity and RSSI from the peripheral (the peripheral advertises sensor data periodically). The central determines current state of the whole system, and offers corresponding feedback from device to user (vibration, notification).

I'm looking for an individual enginee...problems once a review of the current source and documentation has taken place. A lot of our concepts have been originated from the Ti Sensortag hardware. Importantly this project needs to be milestone based. We can decide on what those milestones will be together. If an individual freelancer applies please be ready to work on this project full time. Please respond with. 1. Your availability and potential start date. 2. Your experience with wearable technology. 3. Your experience with BLE. 3. Your experience with Ti CC2640 chip with off chip flash storage. 4. Your experience with NFC. 5. Your experience in programming Firmware. 6. Any mobile app development experience (this is a bonus but not vital to the proj...

Please read everything before responding. Please cover all of the items called for in your response. Using TI (Texas Instruments) iBeacon sensortag CC2650 sensor, spec&tisearch=Search-EN-Everything need you to create a system that will report relative position (X,y,z) & relative angle (x,y,z angle) of the ibeacon, from a point that an initialize command is sent to iBeacon. This shall not be the rate(velocity or Acceleration), but relative position (accuracy to 1 cm) & angle (accuracy to 2 degrees) from the initialization point. Include any appropriate ways to suppress any ambient vibration also. The place where it will be mounted will have constant ambient vibration. Also, operate the iBeacon LEDs at the initialize state & at

Make step-by-step instruction for getting to be build in CCS and run on 2650 Sensortag with OAD support The job requires knowledge in depth work experience with code composer studio and TI sensortag Desired Skills Embedded C, Code Compower Studie, TI Sensortag

We need an iphone app that reads the data(humidity service) from the sensortag cc2650. The application makes the connection vie Bluetooth Low Energy. I have a draft code and I need some changes on that code. that's all.

Please read everything before responding. Using TI (Texas Instruments) iBeacon CC2650 sensor, spec&tisearch=Search-EN-Everything need you to create a system that will report relative position (X,y,z) & relative angle (x,y,z angle) of the ibeacon, from a point that an initialize command is sent to iBeacon. This shall not be the rate(velocity or Acceleration), but relative position (accuracy to 1 cm) & angle (accuracy to 2 degrees) from the initialization point. Include any appropriate ways to suppress any vibration suppression also. The place where it will be mounted will have vibration. Also, operate the iBeacon LEDs at the initialize state & at a preset state. The real-time clock shall also be used on the device for time stamping

make an algorithm to calculate the 6 DOF from the data of a TI Sensortag based on the accelerometer, gyroscope and compass data acquired with 10 Hz acquisition rate. algorithm should be testable in OCTAVE and implemented in i-phone and smartphone

Android App (JAVA) you will need to debug on Android 4.3 and above (Emulator does not work, you need to have access to android 4.3 and above to debug) Need a simple, readable user interface for an electonic control device. App was already written by another company, I just need to edit the UI + add few more buttons ( rights are granted) The app reads/writes data from device by BT BLE. All BLE setup and functionality are already done Mockup UI will be sent. Most of User interface is buttons and checkboxes(need to connect with current functionality). There is a new horizonatlal bar chart that will need to be created 1 or 2 simple calculations need to be implimented. the whole app is 3 to 4 pages only. -page 1: BT scanning + connection -page...

I have an android app that already works and shows me the data I need. I would like to include the option to log this data to a text file. Must know Java I have been trying to run the application on my desktop but failed. Although I develop in C for embedded mcu, I am having trouble debugging the app myself. I managed to install git and get the app into android studio, but not managed to run debugger or run the app from my phone (I already activated developer mode), I need help in this. I can screen share with u less than 1 hour job if you know what u are doing git://

Need to have firmware update process for TI SensorTag from default of BLE to Zigbee documented and tested. Then need to get process designed and implemented for Raspberry PI to talk to TI SensorTag via Zigbee. Will most likely need to establish relationship where questions can be asked and answered related to the electronics of the SensorTag and Zigbee communication.

ecrire une application avec l'outil Evothings Studio pour le SENSORTAG 2 de Texas Instruments

With XE8 RAD Studio it is simple to write programms for Android, ios and Windows. i',m looking for an experienced XE7/8 programmer who can write a simple well documented Programm /(Andorid, IOS and Windows) for the CC2560 TI Sensortag (). The delivery must be a full Project prepared for Android/IOS and Windows. The control of the sensor Tag works via Bluetooth.

An APP connected to SensorTag (). If user run the APP in the back then they can use Sensortag to control other APPs (Like: scroll up and down, flip, select buttons and click buttons...) Basically, the APP like a gamepad mapping software in android. feature: 1. Sensortag can be used as a air mouse 2. gesture control (scroll up and down, flip...) 3. has setting panel to control air mouse function on/off, and change gesture control mapping function. 4. Friendly interface 5. can easily transplant to other platforms: ios, mac/pc... (developing the APP in other platforms in the same time will get premium)

An APP connected to SensorTag (). If user run the APP in the back then they can use Sensortag to control other APPs (Like: scroll up and down, flip, select buttons and click buttons...) Basically, the APP like a gamepad mapping software in android. feature: 1. Sensortag can be used as a air mouse 2. gesture control (scroll up and down, flip...) 3. has setting panel to control air mouse function on/off, and change gesture control mapping function. 4. Friendly interface 5. can easily transplant to other platforms: ios, mac/pc... (developing the APP in other platforms in the same time will get premium)

Hello, This is an update to the data logger project. We need to have someone customize the following application: We need someone who has experience using BLE to communicate with smartphones. Please provide a portfolio of similar work experiences. I will provide the customization requirements once a designer is selected. Thanks, John

If you have the firmware file, text me on whatsapp +918527640898 You can get the file from SENSORTAG-BEACON-FW... for that, you need to have an iBeacon license provided by Apple, if you have I would appreciate you share those files with me.

If you have the firmware file, text me on whatsapp +918527640898 You can get the file from SENSORTAG-BEACON-FW... for that, you need to have an iBeacon license provided by Apple, if you have I would appreciate you share those files with me.

IoT BLE Device based on modified Texas Instruments' CC2541 SoC SensorTAG Modify the comprehensive TI supplied SensorTAG reference design to enhance it's capabilities from both hardware and firmware. At this stage I don't want to start from beginning with other BLE SOC's even if they are better. Your scope doesn't need to include the Android & iOS App development however should you have skills in this area we can addressed as a separate project. Please look at TI's sensortag web page We would like to have following hardware changes to standard SensorTAG; Changes to Electronic Design - New PCA so it can be housed in a different mechanical package - larger Batery - Brighter LEDs - More Memory - Futu...

I would add storage features to TI SensorTag CC2541 PCB. In short, I would store data gathered by sensors in the local embedded flash memory (256kb) and recall them later once I connect my BLE smart device to the SensorTag itself. Currently, the SensorTag CC2541 allows to read data in real time mode only, without any offline operation admitted. The purpose is to have a data logging feature add-on. Required deliverable: 1. SensorTag binary file. 2. SensorTag Firmware source code compiled with IAR Embedded Workbench for 8051 v8.3. 3. Windows host, Android and iOS application executable. 4. Source code of Windows, Android and iOS applications 5. System testing report. 6. User manual to explain how to use complete system.

Customize latest TI Sensortag (CC2541) firmware to start transmitting data after the tag is tapped repeatedly for 5 seconds. So like when someone taps the tag in their hand repeatedly for 5 seconds the device turns on and starts BLE transmission.

I would add storage features to TI SensorTag CC2541 PCB. In short, I would store data gathered by sensors in the local embedded flash memory and recall them later once I connect my BLE smart device to the SensorTag itself. Currently, the SensorTag CC2541 allows to read data in real time mode only, without any offline operation admitted. The purpose is to have a data logging feature add-on.

Hello, I need an iPhone application designed to interface with a bluetooth sensor from Texas instruments, More info on sensor can be located at I need this application to be a beta application with limited functionality but must be able to do the following before full milestone payments are completed Application must do the following 1. Display on screen the current temperature reading from the sensor and have a graphic that shows the temperature . 2. The application must be able to display when one of the 2 buttons on the sensor have been activated. 3. The application must alert the user when they are out of range from the sensor and the sensor buttons are activated. 4. The application

I need you get me the files for SENSORTAG-BEACON-FW... for those you need to have an ibeacon license provided by apple, if you have I would aprreciate you share those files with me... also if not please develop a system as the one I mentioned, its easy I have a demo where you can modify almost everything, you will just need to add how to modify the interval and also add the function of the side button you can read here I am paying just 20 usd

Hello , I need an app created for an iPhone that can interface with the following sensor This app needs to be able to display the data being transmitted by sensor, The app also needs to be able to send alerts to the the user when bluetooth device is out of range. I will also need the app to be bale to send out alerts via text or phone calls. I will need to speak in more detail about this app via Skype if possible. I want to note that i have never written an iPhone app nor do i have a dev account, so will need assistance with that.

I need app to interface with the folloowing sensor

Customize latest TI Sensortag (CC2541) firmware to start transmitting data after the tag is tapped repeatedly for 5 seconds. So like when someone taps the tag in their hand repeatedly for 5 seconds the device turns on and starts BLE transmission.