Nodogsplash openwrtεργασίες

Zerotier Setup for Remote Access I need help setting up ZeroTier on my 750 OpenWrt router so that I can securely access devices connected to my network from outside. I was able to set up ZeroTier on the router, and I can connect to it, but devices on my home network are unreachable. I would appreciate assistance from someone who can remotely connect to my computer, SSH into the router, and perform a proper setup, preferably using the Luci web interface.

I have a routeros config, 1 wan 1 lan 1 static routing on a separate network. eth1 wan eth2 static routing eth3-5 + wifi bridge on lan router will have to use eth2 dns for lan but assign form dhcp standard dns (such as 9.9.9.9), some local clients will use router as dns configured as static. I will need this config to be ported on openwrt or pfsense.

Hi Mihajlo M., I need your help with a Split Tunnel Configuration on OpenWRT using OpenVPN, Kubernetes and ESP8266 devices. Would you be available to help. FollowUp work possible

Hi David K., I need your help with a Split Tunnel Configuration on OpenWRT using OpenVPN, Kubernetes and ESP8266 devices

I have tp link wr842n router with openwrt firmware and have 5 .ovpn configuration file's. The task is to make them work

I need a skilled freelancer to set up a Squid proxy 4.17 for me on Linux (OpenWrt 22.03.4 based on Linux Kernel 5.10) with requirements: 1. Set up separate Squid (must run under different users) instances on each WAN interface (each instance must be with its own configuration file); 2. All instances must use shared caching on SSD or on remote server (need to show how to set it up in the configuration file for both scenarios); 3. Main function of all configurations is the SSL (with SSL bumping) caching of static content, need to do configuration without importing any certificates in browser (static content must be cached without any warnings for valid HTTPS sites in browser, that connected through Squid proxy to remote HTTPS sites); 4. Each Squid instance must provide an 4 HTTP(s...

Hi! I am seeking help with setting up SOCKS5 on my GL-Inet mt1300 router, which uses OpenWRT. I already have an existing OpenWRT setup and I need the SOCKS5 client install on it

I'm looking to set up an OpenWrt router and need a freelancer to help get it ready for multiple devices. I'd like someone who has expertise in advanced configuration and troubleshooting, and can configure the router properly. We need someone that can modify Luci interface and resize ext partition . This project will require advanced troubleshooting skills and expertise in networking solutions. OpenWrt is a powerful router platform with lots of potential so I'm hoping to find someone who can set it up and configure it properly so that I can start using all the features it has to offer.

I need to make a wireless access point device for commercial purpose. It has 1Gbps Ethernet WAN port, It powers via USB Type-C port or via POE. It has 2.5GHz band and 5GHz band. Also it can create a guest network. It runs OpenWrt software. So, can you make a circuit diagram and schematic for this kind of wireless access point device?

Creating a serviceable version of OpenWrt with ubond for Orange Pi Zero H3 hardware. Creating the User Interface to configure all options of ubond and creating a server multitenant ,( need to spawn multiple processes, can be done on one server for many clients/routers of coarse). The project ubond is FREE we should be able to deploy the version to all our routers orange PI zero h3 and aggregate Internet links. We also want to create script to disable any Internet connection reaching the maximum consomption volume. in second part, we will discuss L2 and L3 for support for bugs or any performance issues. in third part, we will create a mobile app to activate Bonding and doing a live speedtest and showing the quality of the Internet connections

I am looking for an experienced freelancer to install and setup openwrt for virtualbox and existing VMs, using both Linux and Windows operating systems. The ideal freelancer for this project would have a great deal of technical experience working with OpenWRT, Virtualbox and VMware, as well as both Linux and Windows operating systems. They should possess the necessary skills to install and setup OpenWRT, create virtualbox images and configure VMs. I require the successful candidate to provide a detailed step-by-step list of the setup process, in order to ensure that the setup is completed correctly. Should you be interested in this project, please feel free to contact me. Thank you.

Hey there, im looking for someone who could help me to make a bugfix on a Side by Side VPN. I have a Server in the Datacenter running opensense and i have a OpenWRT router at home. I would like to create a Side by Side connection between. Everything is setup, but i have somewhere a little config glitch and i can't find whats the problem. Are you able to help?

Need to compile and install OpenWRT on SBC (Armbian s805) with all drivers (LAN and WIFI).

Captive portal development expert is requested with the following tools: - Coova-chilli version 1.3.0 - Modem with OpenWRT 15.04.1 (chaos calmer) - External server with RadiusDESK (for user authentication) The tools are already installed in the modem and a virtual machine for testing. A configuration audit is required to find errors.

Install LUCI API with Openwrt (Open Source) on my Hardware (MT7621 Chipset - Wireless Router)

1) Need 5GHz wifi to be fixed. It can't be detected on my other devices. 2) Need to setup a DNS server. I want to restrict my local Nextcloud traffic to LAN only so I can save on ISP bandwidth.

I have an Openwrt Router which is accessible via wireguard vpn tunnel, currently trying to get openwrt router to allocate ipv6 address and then have the ipv6 address accessible via anyone with a wireguard client

Desarrollar la interconexión de un Módem/Access point basado en OpenWrt para mostrar una interfaz de un portal cautivo para ofrecer wifi gratuito con: 1.- registro por redes sociales (Facebook, Instagram, twitter, Google) 2.- registro por medio de correo con verificación y validación de correo 3.- registro por medio de teléfono celular, con verificación SMS 5.- publicación de videos y media publicitaria inicial al registro o enlaces.a tiendas online externas 6.-generación de estadísticas sobre - Usuarios - Registros - Visitas - Visitas a Links externos Desarrollo en PHP

I want to set up a Linux VPS ( OpenWRT router gl-axt1800) and be able to connect to it when away with another Linux OpenWRT router gl-mt3000 (without installing anything on my computer). I should be able to use the mt-3000, connect to my axt1800 acting as a server and get the axt1800 IP and DNS. However I am behind a CGNAT or double NAT and nothing can pass through the public IP. I have tried installing ZeroTier and Tailscale in both VPS and client routers, and I am able to make my routers ping at each other, but I cannot make all traffic go through VPS and have VPS IP and DNS. Please could you help me set up the VPN so I have IP and DNS from VPS?

I am looking for someone to make a package (firmware) that can be installed on my wireless router. I already have a Linux-based backend (openwrt) and react.js UI ready. Your job will be to use API's from the backend to push configuration from the react.js webpage. Put it all in 1 package so I can install it on my hardware. Let me know if you have any questions. Regards, Aasaan Networks

I have an ongoing work assignment which I need help with . its purely back end shell scripting People familiar with openWRT , ubus are huge value Its all about understanding the current scheme of things and implement a features as and when

Hello, im interested in adopting the TIP openwifi platform and the ecOpen cloud controller, there is some information tied to a github thread and my goal is to find quality hardware on the open market (openWRT compliant for example) that can adopt the TIP openwif model, I will be preparing for a 90 day demo of the controller shorlty and need some expertise in finding some hardware solutions compatible that can deep dive into the TIP openwifi architecture and help me understand how I can use this platform for indoor and outdoor wireless solutions while finding the most cost effective hardware for this emerging dis-aggregated technology. Before bidding on this project please fully read about the TIP openwifi platform, experience with this platform

I need to configure a series of routers with OpenWRT and Wireguard as clients of a corporate Wireward network. I am attaching a small drawing where you can see the architecture we are looking for. We have different 4G routers that behind them have one or more devices with debian 11, ESP32, sensors, network cameras and some other devices. These routers, as well as the devices, have to be accessible and be connected to the servers and client computers that we have in our facilities. Based on the experience in past projects, the architecture that we have begun to deploy consists of a WG Server in a VPS in the cloud that acts as a VPN server. On the other hand, the rest of the devices (Routers) work as clients, allowing from any point of the network to access or transmit data to oth...

Hi Alejandro D., I'm looking for a developer who can develop a net-snmp agent for my openwrt based firmware. If you are interested let me know. Ignore budget.

Hi Naira D., I'm looking for a developer who can develop a net-snmp agent for my openwrt based firmware. If you are interested let me know. Ignore budget.

Hi Narayanan Nampoothiri K., I'm looking for a developer who can develop a net-snmp agent for my openwrt based firmware. If you are interested let me know. Ignore budget.

Hi Tech Experts, I'm looking for a developer who can develop a net-snmp agent for my openwrt based firmware. If you are interested let me know. Ignore budget.

Hi Aravind A., I'm looking for a developer who can develop a net-snmp agent for my openwrt based firmware. If you are interested let me know. Ignore budget.

Hi Alexandr A., I'm looking for a developer who can develop a net-snmp agent for my openwrt based firmware. If you are interested let me know. Ignore budget.

Hi Valeriia H., I'm looking for a developer who can develop a net-snmp agent for my openwrt based firmware. If you are interested let me know. Ignore budget.

Hi noumanmehtab86, Im looking for a developer who can create SNMP agent for an openwrt firmware. If u are interested let me know we can discuss further details over chat. Ignore budget.

I am looking to create a CloudSIM or Remote Virtual SIM System for 4G LTE OpenWRT Routers. This will require a SIM Card emulation on the router device to connect to the network, a SIM Bank or SIM Board to create the SIM Profiles, and an online system to control data allocation, devices, and users.

Hello, based on your experience, i would like to consult with you about my project.

I would like to develop a Gateway, in order to upload to cloud(timestream db) the data from sensors. The sensors are BLE based. I need schematic + PCB design + finalize the prototype by writing the OpenWrt (alternative recommendations are also welcome).

i was able to compile this from openwrt but when i run it, says: Error: No sockets bound, unable to continue if you could get a working webserver running on linux from this would be great, as extra bonus job ide like to be able to run PHP with the CGI extensions like on pay another 50 for this

Hello! I have a Customized Openwrt Build and Private Enterprise Number. im looking for a freelanceer who can recompile net-snmp package for openwrt Build with Private Enterprise number.

boa noite goistaria de um especilista em openwrt para criar firmeware personalizado para mercusys ac 12G

boa noite goistaria de um especilista em openwrt para criar firmeware personalizado para mercusys ac 12G

My name is Vu. We have company in Vietnam, US and Taiwan. We are looking for embedded engineer that have experience with OpenWRT. Have you work on OpenWRT before?

Build openwrt Package to receive smtp alerts based on device status & interface status

SMTP notification interface change of status. OpenWrt platform

Hi, I have the full instructions and need someone to apply them or guide me through until successfull firmware update. Please read below: then: then: use tftp recovery mode in U-Boot: 1. Configure PC with static IP and tftp server. 2. Rename "" to "" and place it in tftp server directory. 3. Connect PC with one of LAN ports, press the reset button, power up the router and keep button pressed for around 6-7 seconds, until device starts downloading the file. 4. Router will download file from server, write it to flash and reboot. I already have the .bin file which

Required installation of Packetfence Server on on AWS and Full configuration of Coovachilli compatible openwrt router

...esp-32-based "S10" IoT gateway from GL.iNet. I need the firmware to read the general advertisements as well as be able to connect to a few specific devices to retrieve the UUID data Important We have an existing source code, and I can give access to interested consultants who can sign an NDA. Pre-request 1. Must have prior experience with ESP-32 (S10 gateway from ) 2. The firmware is based on OpenWRT and ESP-32 chipset (espress IDF toolchain) Requirements 1. We want to enroll 3 Bluetooth devices. 2. Out of 3 devices, one device will advertise data which we are receiving the data and have no problem 3. The other two devices are advertising the following BUT NOT THE ACTUAL DATA a. Device name b. RSSI 4. To get the actual data from these devices, the ESP32 needs to be &ls...

The build is available on The rooter firmware was excellent and stable but I need some more packages there is a compatibility kernel version issue on this as the firmware has an older kernel, need help to update the kernel version root@ROOter:~# opkg install eoip * pkg_hash_check_unresolved: cannot find dependency kernel (= 5.4.213-1-24ba228d1c9cc0e5974cb09dca64f48e) for kmod-tun root@ROOter:~# uname -r 5.4.158

The build is available on The rooter firmware was excellent and stable but I need some more packages there is a compatibility kernel version issue on this as the firmware has an older kernel, need help to update the kernel version root@ROOter:~# opkg install eoip * pkg_hash_check_unresolved: cannot find dependency kernel (= 5.4.213-1-24ba228d1c9cc0e5974cb09dca64f48e) for kmod-tun root@ROOter:~# uname -r 5.4.158

built customised openwrt firmware

hola, alguien experto en openwrt/Airos ubnt. Quiero que ponga el firmware del dispositivo NanostationM5 al dispositivo CPE510.

I have software development background and little understanding setting up. Its a learning project and there are a lot of other things that we will be doing onwards. Let me tr...but we can't port forward to these computers as we know we can port forward one at a time. You will be helping me to setup some solution to overcome this problem, I have OPNSense firewall or anything else you can think of? I also have HP and Cisco switches to create separate networks (VLAN), you can also advise if adding some other hardware can make it simple? What I DO NOT want to use is, OpenWrt and reverse proxy, I do not want to use NGINX. I'm looking for some DNS resolving solution, not sure if we can use DNS service on firewall (OPNSense) or we need to setup a separate routine for res...

I would want an expert OpenWRT engineer/specialist to help me to capture the network logs (IP addresses, source/destination packets) inside a router. Please bid if you can help!